ULDCR11 Datasheet

ULDCR11
www.vishay.com
Vishay Draloric
Compact Metal Plate Power Resistor
FEATURES
• 608 kJ pulse load capability
• Typical temperature rise below 300 K for single
pulse at specified pulse current
• Extremely robust and compact design
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Industrial
• Alternative energy
• Load dump resistor in wind turbines
• Discharge resistor for bulk capacitors
The ULDCR11 belongs to Vishay’s Ultra Load Dump
Crowbar Resistor series. This ruggedized product family is
especially designed to absorb and withstand short pulses of
enormous loads and is therefore an excellent choice for
energy dumping applications in the fields of industry or
alternative energy.
TECHNICAL SPECIFICATIONS
DESCRIPTION
ULDCR11
Resistance
0.09 
Resistance tolerance
± 10 %
Temperature coefficient
+ 1030 ppm/K
Pulse energy Ep (1)(2)
608 kJ
Pulse current Ip (1)(2)
1300 A
Inductance
< 10 μH
Notes
(1) Rectangular pulse t = 4 s, recovery time between 2 pulses t > 40 min at operation in unforced convection at 40 °C ambient temperature.
i
r
(2) Short time overload t = 0.5 s, I = 5100 A, energy E = 1.2 MJ, temperature rise below 350 K.
i
p
p
APPLICATION INFORMATION
The impact of the pulse current Ip for the duration ti generates a typical temperature rise against the local ambient temperature
in the active material of the resistor. As long as the given pulse energy Ep is not exceeded, the temperature rise stays below
300 K. In case of natural convection at 40 °C ambient temperature the ULDCR11 needs more than 40 min to cool down back
to the ambient temperature level. Operation in forced convection shortens the advisable minimum cooling time until the next
pulse load.
The example of the short time overload proofs the tremendous robustness against current induced forces. The ULDCR11
withstands a pulse current Ip of 5100 A for 0.5 s. The related rise of the temperature do not exceed 350 K. The recovery time
prolongs compared to the specified standard conditions.
The resistors do not feature a limited lifetime when operated at the specified parameters. Overheating will not automatically
destroy the resistor. Repetitive or permanent exceedance of the load values may cause a change of the crystal structure, the
oxidation behavior and the temperature coefficient of the resistive material though.
Revision: 27-Mar-15
Document Number: 21039
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ULDCR11
www.vishay.com
Vishay Draloric
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: ULDCR11900FKA0LX00
U
L
D
C
R
1
1
9
0
0
F
K
A
0
L
X
0
0
TYPE
RESISTANCE
TOLERANCE
TCR
HOUSING
PACKAGING
CODE
SPECIAL
ULDCR11
3 digit value
1 digit
multiplier
K = ± 10 %
A=
+ 1030 ppm/K
0 = IP00
LX =
loose pack,
without
quantity
00 = Standard
2 digit code =
customized
version
MULTIPLIER
F = *10-4
Product Description: ULDCR11 R09 10 % +1030 IP00 LX
ULDCR11
R09
TYPE
10 %
RESISTANCE
+1030
TOLERANCE
TCR
IP00
LX
HOUSING
PACKAGING
CODE
Note
• The product can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION.
ELECTRICAL CONNECTION
Two M10 - bolt screws serve as electrical connections. Their
dimensions and positions are shown in the corresponding
drawing on the next page.
The cylindrical, 30 mm high insulators feature a M10 - thread
of 9 mm tap depth. The table below contains the relevant
electrical and mechanical parameters.
The positions of the standoff insulators are shown in the
technical drawing on the next page.
ASSEMBLY
The mounting positions of the resistor are horizontally
regular as well as horizontally or vertically hanging.
Therefore the ULDCR11 is equipped with six fiberglass
reinforced polyester polyglas mass standoff insulators.
PACKAGING
Each resistor is packed in a cardboard box. Single samples
are delivered as individual packets. Bigger lot sizes will
additionally be fixed on euro-pallets.
STANDOFF INSULATORS
HEIGHT
(mm)
DIAMETER
(mm)
WRENCH
SIZE
(mm)
THREAD
TAP DEPTH
(mm)
MAX. STUD
TORQUE
(Nm)
LEAKAGE
STRENGTH (1)
(kV)
BREAKDOWN
VOLTAGE (1)
(kV)
FIRE
BEHAVIOUR
30
30
30
M10
9
43
8
20
UL94-V0
Note
(1) The test of insulating materials were executed according the terms of VDE 0303-21 03/1999/DIN EN 60243-1 03/1999.
RELATED PRODUCTS
• For a comprehensive overview of all available ULDCR designs refer to the selector guide (www.vishay.com/doc?48002).
• For stainless steel power resistors, refer to the VSGR series (www.vishay.com/doc?21032).
Revision: 27-Mar-15
Document Number: 21039
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ULDCR11
www.vishay.com
Vishay Draloric
DIMENSIONS
MODEL
L
(mm)
L1
(mm)
W
(mm)
W1
(mm)
W2
(mm)
H
(mm)
H1
(mm)
H2
(mm)
H3
(mm)
H4
(mm)
MASS
(kg)
ULDCR11
388 ± 2
358 ± 1.5
193 ± 2
163 ± 1.5
45 ± 0.5
91 ± 2
88 ± 1.5
55 ± 1.5
30 ± 0.5
20 ± 1
10 ± 0.5
Note
• The inscription XXXA denotes the place of the serial number of the ULDCR11.
Revision: 27-Mar-15
Document Number: 21039
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000