Data Sheet - SPFCW14321BD

ISSUE NO :
Rev: 0.0
SPECIFICATION
MODEL : SPFCW14321BDS2R0T0
High Power Flash LED
CUSTOMER : General
CUSTOMER :
CHECKED
CHECKED
APPROVED
SAMSUNG ELECTRONICS
DRAWN
CHECKED
APPROVED
SAMSUNG ELECTRONICS CO,.LTD.
San #24 Nongseo-Dong, Giheung-Gu, Yongin-City,
Gyeonggi-Do 446-711, Korea
http://www.samsung.com/sec
1. Product Outline
1) Features
. Low profile lens-integrated LED ( 4.0 x 3.9 x t 1.9mm )
. Wide Beam Angle ( △θ : 620x480 ) for uniform illuminance
. InGaN/GaN MQW LED with long-time reliability
. Lead (Pb) free product - RoHS compliant
2) Applications
. Flashlight for cameraphones & digital still cameras
. Torchlight
. Amusement equipment
. Other applications
2. Absolute Maximum Rating
1) Torch Mode Operation Forward Current (Ta = 25℃) .......... 300 mA
2) Flash Mode Peak Pulsed Forward Current ........................ 1300 mA
(Pulse width t≤300msec, Duty ratio=0.06, Ta=25℃)
3) Reverse Current ........................................................................ 85 mA
4) Thermal Resistance ( Rth,j-s ) ..................................................... 9 K/W
5) LED Junction Temperature ( TJ ) .............................................. 125℃
6) Operating Temperature Range ( Topr ) ........................ -40℃ ∼ 85℃
7) Storage Temperature Range ( Tstg ) ........................... -40℃ ∼ 100℃
3. Characteristics
1) Specifications
( Ta : 25℃ )
Item
Unit
Condition
Min
Typ
Max
Illuminance
lux
IF = 1000 mA
160
200
250
Forward Voltage (VF)
V
IF = 1000 mA
2.8
3.6
4.3
Chromaticity Coordinates
x,y
IF = 1000 mA
Reverse Voltage (VR)
V
IR =10 mA
0.6
-
1.2
Low Current Voltage (VF)
V
IF = 1 μA
1.7
-
2.7
Size
mm
-
Refer to the CIE chromaticity
coordinates in page 7
4.0 x 3.9 x 1.9
Notes
* Samsung LED uses the above specifications table as the final product test criteria.
* Samsung LED maintains a tester tolerance of ±10% on flux measurements.
* Samsung LED maintains a tolerance of ±0.15V on forward voltage measurements.
* Samsung LED maintains a tester tolerance of ±0.01 on CCx, CCy measurements.
* Samsung LED maintains a tester tolerance of ±10% on low current voltage measurements.
* Samsung LED maintains a tolerance of ±0.1 mm on device dimensions.
http://www.samsung.com/sec
2) General characteristics
( Ta : 25℃ )
Item
Unit
Illuminance
(at 1 meter)
lux
Condition
Min
Typ
Max
IF = 150 mA
39
49
60
IF = 700
mAⓐ
128
160
200
IF = 1000
mAⓑ
160
200
250
IF = 150 mA
Luminous Intensity
cd
Luminous Flux
lm
Forward Voltage (VF)
V
39
49
60
mAⓐ
128
160
200
IF = 1000 mAⓑ
160
200
250
IF = 150 mA
IF = 700
48
60
74
mAⓐ
157
196
245
IF = 1000 mAⓑ
195
245
305
IF = 150 mA
2.4
3.0
3.5
IF = 700 mAⓐ
2.7
3.4
4.1
IF = 700
2.8
3.5
4.3
IF = 150 mA
4744
5693
6642
IF = 700 mAⓐ
4939
5927
6915
mAⓑ
5000
6000
7000
0.6
-
1.2
IF = 1000
CCT
°K
IF = 1000
mAⓑ
Reverse Voltage (VR)
V
IR = 10 mA
Size
mm
-
4.0 x 3.9 x 1.9
Notes:
* The above data table is for design reference only.
ⓐ Pulse mode operation: Pulse width ≤ 400ms, Duty ratio 0.12 for IF = 700mA
ⓑ Pulse mode operation: Pulse width ≤ 300ms, Duty ratio 0.1 for IF = 1000mA
3) Chromaticity Diagram
Condition
IF=1000mA
x
0.342
0.313
y
0.302
0.348
0.312
0.282
0.339
0.385
* CIE coordinate at outgoing inspection can deviate within the range of tester tolerance of ±0.01
http://www.samsung.com/sec
4. Typical Characteristics Graph
* These graphs show typical values.
Illuminance vs. Forward Current
Luminous Flux vs. Forward Current
Forward Current vs. Forward Voltage
Relative Spectral Emission
1.2
Relative Intensity
1.0
0.8
0.6
0.4
0.2
0.0
350
450
550
650
750
Wavelength(nm)
Radiation Pattern
Intensity Drop vs. Time
at Pulse Operation
* LED under test is SMT-soldered on
a Samsung LED standard FR4 PCB
http://www.samsung.com/sec
* These graphs show typical values.
Chromaticity vs. Forward Current
x Coordinate
y Coordinate
(Ta = 25℃)
Max. Pulse Rating
Max. DC Rating
Uniformity Map
http://www.samsung.com/sec
(Ta = 25℃)
5. Precaution for use
1) For overcurrent-protection, customers are recommended to apply resistors
connected in series with the LEDs to mitigate sudden change of the forward current
caused by shift of the forward voltage. 2) This device should not be used in any type of fluid such as water, oil, organic
solvent, etc. When cleaning is required, IPA is recommended as cleaning agent.
Solvent-based cleaning agent such as Zestron(R) may damage the silicone resins used in
the device. 3) When the device is in operation, the forward current should be carefully determined
considering the maximum ambient temperature and the corresponding junction
temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3
months or more after being shipped from Samsung LED, they should be packed with a
nitrogen-filled container.
(Shelf life of sealed bags: 12 months, temp. 0~40℃, 20~70%RH)
5) After storage bag is open, device subject to soldering, solder reflow, or other
high temperature processes must be:
a. Mounted within 168 hours (7 days) at an assembly line with a condition of no
more than 30℃/60%RH.
b. Stored at <10% RH.
6) Repack unused Products with anti-moisture packing, fold to close any opening and
then store in a dry place.
7) Devices require baking before mounting, if humidity card reading reaches 60%
at 23±5℃. 8) Devices must be baked for 24hours at 65±5℃, if baking is required. 9) The LEDs are sensitive to the static electricity and surge current. It is recommended to
use a wrist band or anti-electrostatic glove when handling the LEDs.
If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause
damage or even destruction to LED devices.
Damaged LEDs may show some unusual characteristics such as increase in leakage
current, lowered turn-on voltage, or abnormal lighting of LEDs at low current.
10) The LEDs package must be handled with care, especially top surface of the lens must
not be stressed on handling. Pick the sidewall of package mold and do not touch the
lens area when manual movement of each LEDs.
11) When processing by automated pick and place machine for SMT, the pressure applied
to lens directly should be controlled less than 1Kg.
Pickup tool should be designed according to lens shape. Pickup tool without cavity for
lens area consideration can cause serious damage to package.
http://www.samsung.com/sec
6. QC Flow Chart
Process Flow Chart for Flash LED
Input
Process
Process monitor
& Inspection
Q.C & Q.A
Gate
100% Inspection
Device name
Diagram
P.K.G Type
Customer
Area
Diagram
Process
I.Q.C
Incoming QC
Material
Equipment
Lead Frame, Lens,
Microscope
etc.
Inspection Item
LF External
Contamination etc.
Visual
Inspection
Visual
Inspection
Front-End
Laser Marking Lead Frame
Laser Marker
Marking Lot ID
Lead Frame
Pre Cure
Lead Frame
Cure Oven
Parameter
Die Attach
Ag Paste
Ag Paste
Die Bonding
Machine
Paste Coverage
& Scope Inspection
Visual
Inspection
Reflow
N2
Reflow Oven
Die shear
Shear Tester
Plasma
Cleaning
Ar
Plasma
cleaner
Parameter
Gold Wire
Wire Bonding
Machine
Wire Pull Test
Ball Shear Test
Wire Bonding(Visual
monitor, Parameter)
Scope Inspection
Pull Tester
Shear Tester
Visual Inspection
EVI Machine
Over Flow
Under Flow
Wire Bent
Inspection Program
Wire Bonding
DP EVI
Back-End
Lens
Attaching
Lens
Lens Attach
Machine
Mold Visual Monitor
Parameter Monitor
Visual Inspection
(100%)
Oven Cure
N2
Cure Oven
Lens shear
Shear Tester
Trimming
Machine
Dimension
Scope Inspection
Trimming
Test
Taping&
Reel
Test
Singulated
Packages
Test Handler
Electrical Test
(IV, VF, IR)
Optical Test(Lm)
Tester (CAS)
Taping
Reel, Carrier Tape,
Cover Tape
Taping Machine,
Peel Tester
Visual Inspection
Visual
Inspection
Bag Sealing
Al Bag
Silica Gel
Humidity Card
Sealing Machine
Packing Label
Inspection
Visual Inspection
(100%)
Packing
Box Tape
Machine
Packing Label
Inspection
Visual Inspection
(100%)
Final
Inspection
Q.C Gate
Shipment
Product
LED Tester
Electrical, Optical Test
Scope Inspection
(Monitor)
Tape & Reel
Inspection
→ Ionizer Dry Box
Packing
Q.C
NO
YE
Warehouse
Prod.
Inspection
Stocking
http://www.samsung.com/sec
Flash LED
4039RS
(4.0*3.9*2.0)
(4.0*3.9*1.9)
RIM
Q.C&Q.A
Inspection
Ref.
7. Appendix
(1) Hazard Substance Analysis(SGS)
http://www.samsung.com/sec
http://www.samsung.com/sec
http://www.samsung.com/sec
http://www.samsung.com/sec
http://www.samsung.com/sec
http://www.samsung.com/sec
(2) LED Eye Safety Standards
http://www.samsung.com/sec
http://www.samsung.com/sec