WSLT3921, WSLT5931 www.vishay.com Vishay Dale Power Metal Strip® Resistors, High Temperature (275 °C), Low Value (down to 0.0002 ), Surface Mount FEATURES Available • Ideal for all types of current sensing, voltage division and pulse applications including switching and linear power supplies, instruments, power amplifiers • Proprietary processing technique produces extremely low resistance values, down to 0.0002 • Specially selected and stabilized materials allow for high temperature derating (to +275 °C) • All welded construction • Solid metal iron-chrome or manganese-copper alloy resistive element with low TCR (< 20 ppm/°C) • Very low inductance (< 5 H) • Low thermal EMF (< 3 μV/°C) • AEC-Q200 qualified available (1) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note (1) Flame retardance test may not be applicable to some resistor technologies. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70 °C W GLOBAL MODEL SIZE WSLT3921 3921 3.0 WSLT5931 5931 5.0 RESISTANCE VALUE RANGE RESISTANCE VALUES CURRENTLY AVAILABLE (2) WEIGHT (typical) g/1000 pieces 1.0, 5.0 0.2m to 4m 0.2m, 0.5m, 1m, 2m, 3m, 4m 281 1.0, 5.0 0.3m to 3m 0.3m, 0.5m, 1m, 2m, 3m 398 TOLERANCE % Notes • Part marking: No part marking on these parts. (2) Other values may be available, contact factory. TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Component temperature coefficient (including terminal) (3) ppm/°C ± 175 for 0.2 m and 0.5 m, ± 75 for 1 m to 4 m Element TCR (4) ppm/°C < 20 Operating temperature range °C -65 to +275 Maximum working voltage (5) V (P x R)1/2 Notes (3) Component TCR - total TCR that includes the TCR effects of the resistor element and the copper terminal. (4) Element TCR - only applies to the alloy used for the resistor element; refer to item 1 in the construction illustration on the following page. (5) Maximum working voltage - the WSL is not voltage sensitive, but is limited by power / energy dissipation and is also not ESD sensitive. GLOBAL PART NUMBER INFORMATION Global Part Numbering: WSLT39212L000FEA (WSLT3921, 0.002 , ± 1 %) (visit www.vishay.net Vishay Dale parts numbering manual for all options) W S L T 3 9 2 1 2 L 0 0 0 F E A GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE (6) SPECIAL WSLT3921 WSLT5931 L = m 2L000 = 0.002 F = ± 1.0 % J = ± 5.0 % EA = Lead (Pb)-free, tape/reel EK = Lead (Pb)-free, bulk Reserved for future specials Note (6) Packaging code: EB (lead (Pb)-free) and TB (tin / lead) are non-standard packaging codes designating 1000 piece reels. These non-standard packaging codes are identical to our standard EA (lead (Pb)-free) and TA (tin / lead), except that they have a package quantity of 1000 pieces. Revision: 09-Mar-16 Document Number: 30136 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSLT3921, WSLT5931 www.vishay.com Vishay Dale DIMENSIONS DIMENSIONS in inches (millimeters) MODEL H D L L W H T 0.394 ± 0.010 0.205 ± 0.010 0.020 0.080 ± 0.010 WSLT3921 (10.0 ± 0.254) (5.20 ± 0.254) (0.5) (2.00 ± 0.254) WSLT5931 W 0.591 ± 0.010 0.305 ± 0.010 0.020 0.157 ± 0.010 (15.0 ± 0.254) (7.75 ± 0.254) (0.5) (4.00 ± 0.254) T MODEL Typical current sensing traces d b l WSLT3921 0.106 ± 0.010 (2.70 ± 0.254) 0.244 ± 0.010 (6.20 ± 0.254) 0.220 ± 0.005 (5.60 ± 0.13) WSLT5931 0.205 ± 0.010 (5.20 ± 0.254) 0.344 ± 0.010 (8.75 ± 0.254) 0.220 ± 0.005 (5.60 ± 0.13) GLOBAL MODEL RESISTANCE VALUE (m) “D” THICKNESS (Inches) ELEMENT MATERIAL WSLT3921 0.2 0.0560 Mn-Cu WSLT3921 0.5 0.0300 Mn-Cu WSLT3921 1.0 0.0150 Mn-Cu WSLT3921 2.0 0.0270 Fe-Cr WSLT3921 3.0 0.0170 Fe-Cr WSLT3921 4.0 0.0130 Fe-Cr WSLT5931 0.3 0.0300 Mn-Cu WSLT5931 0.5 0.0180 Mn-Cu WSLT5931 1.0 0.0330 Fe-Cr WSLT5931 2.0 0.0155 Fe-Cr WSLT5931 3.0 0.0105 Fe-Cr I b SOLDER PAD DIMENSIONS in inches (millimeters) d Note • 3D models available at www.vishay.com/ppg?30136 Rated Power in % DERATING - AMBIENT TEMPERATURE 120 100 80 60 40 20 0 -65 0 70 150 200 275 Ambient Temperature in °C 120 P/PNorm in % P/PNorm in % DERATING - TERMINAL TEMPERATURE 100 80 120 100 80 60 60 40 40 Stability < 1.0 % Stability < 0.5 % 20 Stability < 1.0 % Stability < 0.5 % 20 0 0 0 20 40 60 80 100 120 140 160 180 Terminal Temperature TK in °C Example: WSLT3921 0.0005 Revision: 09-Mar-16 0 20 40 60 80 100 120 140 160 180 Terminal Temperature TK in °C Example: WSLT5931 0.0005 Document Number: 30136 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSLT3921, WSLT5931 www.vishay.com Vishay Dale PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal shock -55 °C to +150 °C, 1000 cycles, 15 min at each extreme ± (1.0 % + 0.0005 ) R Short time overload 5x rated power for 5 s ± (0.5 % + 0.0005 ) R Low temperature storage -65 °C for 45 min ± (0.5 % + 0.0005 ) R High temperature exposure 1000 h at + 275 °C ± (1.0 % + 0.0005 ) R Bias humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± (0.5 % + 0.0005 ) R Mechanical shock 100 g’s for 6 ms, 5 pulses ± (0.5 % + 0.0005 ) R Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h ± (0.5 % + 0.0005 ) R Load life 1000 h at +70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.0005 ) R Resistance to solder heat +260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.0005 ) R Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (0.5 % + 0.0005 ) R PACKAGING MODEL REEL TAPE WIDTH DIAMETER PIECES/REEL CODE WSLT3921 16 mm/embossed plastic 330 mm/13" 3000 EA WSLT5931 24 mm/embossed plastic 330 mm/13" 1500 EA Note • Embossed Carrier Tape per EIA-481. Revision: 09-Mar-16 Document Number: 30136 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000