SPR2213, SPR2214 www.vishay.com Vishay Dale Wirewound Resistors, Special Purpose, Commercial, High Power FEATURES • High power / size ratio • Quick connect terminals • Complete welded construction Available • High surge capability • Non-inductive styles available Available • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package Available • SPR2214 is available with a center terminal option • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W WITHOUT HEAT SINK POWER RATING P25 °C W WITH HEAT SINK (1) RESISTANCE RANGE TOLERANCE ±% SPR2213 SPR-2213 40 70 0.5 to 24K 5, 10 SPR2214 SPR-2214 50 100 1.0 to 44K 5, 10 Note (1) Recommended heat sink is 12" x 12" x 0.125" thick aluminum panel (294 sq. in. surface area). TECHNICAL SPECIFICATIONS PARAMETER UNIT SPR2213, SPR2214 RESISTOR CHARACTERISTICS ppm/°C ± 30 10 and above; ± 50 below 10 Short Time Overload - 10 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C -65 to +275 Dielectric Withstanding Voltage VAC 2500 Temperature Coefficient GLOBAL PART NUMBER INFORMATION Global Part Numbering example: SPR221375R000JD S P R 2 2 1 3 7 5 R 0 0 0 J D GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL SPR2213 SPR2214 R = decimal K = thousand R15000 = 0.15 1K5000 = 1500 J = ± 5.0 % K = ± 10.0 % D = skin pack (S51) K = RoHS compliant, skin pack (E51) (dash number) (up to 2 digits) from 1 to 99 as applicable Historical Part Numbering example: SPR-2213 75 5 % S51 SPR-2213 75 5% S51 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note • Brackets used with “D” packaging code are not RoHS/Green compliant. Revision: 02-May-16 Document Number: 30224 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPR2213, SPR2214 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] SPR2213 W 1.25 [31.75] typical H A SPR2214 B W C H 0.195 [4.95] ± 0.005 [0.127] 0.195 [4.95] ± 0.005 [0.127] Diameter 0.827 [21.01] ± 0.020 [0.508] DIMENSIONS in inches [millimeters] GLOBAL MODEL A TYPICAL B ± 0.031 [0.794] C ± 0.031 [0.794] W ± 0.005 [0.127] H TYPICAL SPR2213 3.375 [85.73] 3.00 [76.20] 2.50 [63.50] 0.250 x 0.031 [6.35 x 0.794] 0.810 [20.57] SPR2214 4.563 [115.90] 4.125 [104.78] 3.625 [92.08] 0.250 x 0.031 [6.35 x 0.794] 0.810 [20.57] MATERIAL SPECIFICATIONS Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: steatite ceramic Body: steatite ceramic case with inorganic potting compound Part Marking: DALE, model, wattage, value, tolerance, date code HEAT SINK DERATING RATED POWER IN % RATED POWER IN % DERATING Terminals: nickel plated steel Bracket: zinc plated steel 120 100 80 60 40 20 100 80 60 SPR2214 40 20 0 0 - 65 - 25 75 25 125 175 225 275 AMBIENT TEMPERATURE IN °C SPR2213 0 20 40 60 80 100 % OF RECOMMENDED HEAT SINK AREA PERFORMANCE TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage High Temperature Exposure Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Revision: 02-May-16 CONDITIONS OF TEST Rated power applied until thermally stable, then a minimum of 15 min at -55 °C 10 x rated power for 5 s 1000 VRMS, 1 min -65 °C for 24 h 250 h at +275 °C MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each 1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” TEST LIMITS ± (2.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (0.1 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (2.0 % + 0.05 ) R ± (0.2 % + 0.05 ) R ± (0.2 % + 0.05 ) R ± (3.0 % + 0.05 ) R Document Number: 30224 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000