RMB, RMBS Datasheet

RMB, RMBS
www.vishay.com
Vishay Sfernice
Molded Precision Wirewound Resistors
Axial Leads
FEATURES
• 0.75 W to 3 W at 25 °C
• NF C 83-210
• CECC 40201-005
• Low temperature coefficient  ± 50 ppm/°C
• Low ohmic values 15 m available
• Excellent behavior against humidity
• Electrical insulation
• Mechanical strength
• Accurate sizes
• Termination = Sn/Ag/Cu or pure matte tin according to the
ohmic value
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
High stability and low temperature coefficient are the main features of the precision wirewound resistors type RMB RMBS
models just as maintenance parts. Their performances can be compared with those of the best film resistors but they have in
addition a greater power rating. RMBS styles meet the more severe requirements of NF C 83-210 (all RMBS styles are approved)
and characteristic U of MIL-R-26 E (approximate size of RW 70 and 79 resistors) specifications. The two models RMB and
RMBS have a similar construction. RMBS are submitted, in addition to a process which further increases the stability. On
request, non-inductive resistors are available under the reference RMB NI.
DIMENSIONS in millimeters
25 min.
ØE
A
25 min.
ØB
SERIES
AND
STYLE
A
max.
ØB
max.
E ± 0.1
WEIGHT
g
RMB0.75
RMBS0.5
7
2.5
0.6
0.3
RMB1.5
RMBS1
10.2
4
0.6
0.7
RMB3
RMBS2
16.2
6.4
0.8
1.5
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE

RATED POWER
P25 °C
W
LIMITING ELEMENT
VOLTAGE
V
TOLERANCE
±%
RMB0.75
075
0.1 to 2K
0.75
n/a
0.1, 0.5, 1, 2, 5
RMB1.5
105
0.1 to 6.81K
1.5
120
0.1, 0.5, 1, 2, 5
RMB3
300
0.051 to 13K
3
200
0.1, 0.5, 1, 2, 5
RMBS0.5
05
0.1 to 2K
0.5
n/a
0.1, 0.5, 1, 2, 5
RMBS1
10
0.1 to 6.81K
1
120
0.1, 0.5, 1, 2, 5
RMBS2
20
0.015 to 13K
2
200
0.1, 0.5, 1, 2, 5
Note
•
Undergoes European Quality Insurance System (CECC)
Revision: 23-Sep-13
Document Number: 50010
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RMB, RMBS
www.vishay.com
Vishay Sfernice
TECHNICAL SPECIFICATIONS
VISHAY SFERNICE SERIES AND STYLE
RMB0.75
RMB1.5
RMB3
-
-
-
NF C 83-210
CECC 40201-005
at 25 °C
Power Rating
at 70 °C
Ohmic Range in
Relation to
Tolerance
RMBS0.5
RMBS1
RMBS2
RP2
RP3
RP1
-
-
-
A
B
C
0.75 W
1.5 W
3W
0.5 W
1W
2W
0.6 W
1.2 W
2.4 W
0.4 W
0.8 W
1.6 W
± 5 % E24
0.1  to
2 k
0.1  to
6.81 k
0.051  to
13 k
0.1  to
2 k
0.1  to
6.81 k
0.015  to
13 k
± 2 % E48
0.1  to
2 k
0.1  to
6.81 k
0.08  to
12.3 k
0.1  to
2 k
0.1  to
6.81 k
0.078  to
12.4 k
± 1 % E96
0.1  to
2 k
0.1  to
6.81 k
0.1  to
12.4 k
0.1  to
2 k
0.1  to
6.81 k
0.1  to
12.4 k
± 0.5 % E96
0.4  to
2 k
0.4  to
6.81 k
0.3  to
12.4 k
0.4  to
2 k
0.4  to
6.81 k
0.3  to
12.4 k
± 0.1 %
Please consult Vishay Sfernice
-
-
-
1  to 174 
1  to 590 
1  to 1.3 k
Not applicable
120 V
200 V
Not applicable
120 V
200 V
Qualified Ohmic Range NF C 83-210
Limiting Element Voltage
Critical Resistance
Out of nominal ohmic range
Note
•
Undergoes European Quality Insurance System (CECC)
PERFORMANCE
TESTS
CONDITIONS
REQUIREMENTS
TYPICAL VALUES AND DRIFTS
MIL-R-26 E
NF C 83-210
500 VRMS
± (0.1 % + 0.05 )
-
± (0.05 % + 0.01 ) ± (0.05 % + 0.01 )
Short Time Overload
5 Pn at 25 °C/5 s
± (0.2 % + 0.05 )
± 0.25 % + 0.05 
± (0.1 % + 0.01 ) ± (0.05 % + 0.01 )
Climatic Sequence
NF C 83-210
-55 °C / +200 °C
5 cycles
-
± 0.25 % + 0.05 
± (0.1 % + 0.01 ) ± (0.05 % + 0.01 )
Insulation R > 100 M
> 104 M
> 104 M
Humidity
(Steady State)
NF C 83-210
56 days 95 % RH
-
± 0.25 % + 0.05 
± (0.1 % + 0.01 ) ± (0.05 % + 0.01 )
Insulation R > 100 M
> 104 M
> 104 M
Thermal Shock
Load at 100 % P followed
by cold temp. exposure
at -55 °C
± (0.2 % + 0.05 )
-
Vibration
MIL-STD-202
Method 204 - Test D: 20 g
10/2000 Hz
± (0.2 % + 0.05 )
± 0.25 % + 0.05 
Load Life
MIL-STD-202
Method 108 Pr 2000 h
± (0.5 % + 0.05 )
± 0.25 % + 0.05 
1000 h at 25 °C
MIL-STD-202
Method 106
± (0.2 % + 0.05 )
Insulation resistance
> 100 M
-
1000 h at +200 °C
± (0.5 % + 0.05 )
± 0.5 % + 0.05 
Insulation R > 1 G
±1%
± 0.3 %
MIL-STD-202
100 g Method 205 Test C
± (0.1 % + 0.05 )
± 0.25 % + 0.05 
± 0.05 %
± 0.05 %
Dielectric W/s Voltage
Moisture Resistance
High Temperature
Shock
RMB
± (0.2 % + 0.01 )
RMBS
(0.1 % + 0.01 )
± (0.01 % + 0.01 ) ± (0.01 % + 0.01 )
± (1 % + 0.01 )
± (0.15 % + 0.01 )
± (0.1 % + 0.01 ) ± (0.05 % + 0.01 )
> 103 M
> 103 M
TEMPERATURE COEFFICIENT IN THE RANGE -55 °C TO +200 °C
OHMIC RANGE
REQUIREMENTS
NF C 83-210 MIL-R-26E
Rn < 1
 ± 100 ppm/°C
1  Rn < 10
 ± 50 ppm/°C
Rn  10
 ± 25 ppm/°C
TYPICAL VALUES
SFERNICE
MIL
Revision: 23-Sep-13
± 50 ppm/°C
+0 °C to -20 ppm/°C
Document Number: 50010
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RMB, RMBS
www.vishay.com
Vishay Sfernice
STABILITY AND POWER RATING
Stability changes slightly according to power rating and ambient temperature. This fact is specially important for users needing
a life drift lower than the initial resistance tolerance. Typical drifts, after 2000 h life test made under the 90’/30’ conditions and
at a 25 °C ambient temperature are:
MODEL
STYLE
RMBS
0.5
RMBS
1
RMBS
2
R %/R %
MODEL
STYLE
RMB
0.75
RMB
1.5
RMB
3
R %/R %
Pn
0.5 W
1W
2W
0.15 %
Pmax.
1W
2W
3.5 W
1%
1/2 Pn
0.25 W
0.5 W
1W
0.075 %
Pn
0.75 W
1.5 W
3W
0.5 %
1/3 Pn
0.4 W
0.75 W
1.5 W
0.3 %
POWER RATING
TEMPERATURE RISE
250
75
50
37
25
0.
5
150
50
100
150
200
2
BS
RM
.5
B3
B1
RM
RM
100
50
0
0
RM
BS
200
B0
.7
5
100
1
BS
RM
RM
HOT SPOT TEMPERATURE IN°C
RATED POWER IN %
125
0
250 275 300 350
0
1
AMBIENT TEMPERATURE IN °C
2
3
RATED POWER IN W
MARKING
Vishay Sfernice trademark, model, style, CECC style (if applicable) nominal resistance (in ), tolerance (in %), manufacturing date.
ORDERING INFORMATION
RMB
105
R5000
J
S00
RMBS
05
22R00
J
S14
MODEL
STYLE
OHMIC VALUE
TOLERANCE
PACKAGING
GLOBAL PART NUMBER INFORMATION
R
GLOBAL
MODEL
RMB
RMBS
M
B
1
0
5
3
0
0
R
0
J
S
0
0
SIZE
OPTION
OHMIC VALUE
TOLERANCE
PACKAGING
SPECIAL
RMB:
075
105
300
RMBS:
05
10
20
N = Non
inductive
winding
The first four digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
R designates decimal
point.
300R0 = 300 
680R0 = 680 
20301 = 20.3 k
88R88 = 88.88 
...
F=1%
J=5%
Standard Packaging:
As applicable
Ex = MEX
Revision: 23-Sep-13
RMB:
Size 075 and 105: S14 = Bag, 100 pieces
Size 300: S09 = Bag, 50 pieces
RMBS:
Size 05 and 10: S14 = Bag, 100 pieces
Size 20: S09 = Bag, 50 pieces
Other packagings available
Document Number: 50010
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000