Datasheet

NetAXS-123
Stand-alone, modular, web-enabled
access control system
access control solution that can be easily installed and
On-line management and remote service
opportunity
managed via a web browser without the need to be
As a web-based panel NetAXS-123 can be connected to the
connected to a network or the internet. Each NetAXS-123
internet or a company's intranet, which enables the user to
panel can be configured for one, two or three doors.
manage their access control within the company's network
NetAXS-123 is a fully featured, compact stand-alone
Stand-alone panel managed using free web
browser functionality
NetAXS-123 doesn't require an on-line connection or a
dedicated PC and operates autonomously. To manage the
card holders and access control functionality on the panel
on-line. If the user's network provides access to the internet
for the NetAXS-123 panel, the installer has the opportunity to
remotely service and maintain the panel, connecting safely
using secure internet protocols. In both cases, the only tool
needed is a laptop with the web browser.
locally, simply connect via the free web browser using a
Low cost of ownership
USB or standard network cable to any PC or laptop.
NetAXS-123 is an affordable solution for the user.
Easy installation saves time
The NetAXS-123 panel provides all connections for 1, 2 or
3 doors with one or two readers per door. Expanding a
one door system takes just minutes with the NetAXS-123
add-on boards for one or two doors. Connecting the
peripherals is made easier and wiring minimised using
Power over Ethernet (PoE) capability, self powered outputs
for locks and USB connectivity. Units are available in either
a compact plastic enclosure or a metal enclosure with a
built-in power supply for panel and locks. Both are
attractively designed to blend in with users' premises.
No need for dedicated software
Whether the user needs to run a report or manage card
holders or you need to service and maintain the NetAXS-123
panel, there is no need for dedicated software. Everything is
managed securely via the web interface.
Easy as @bc
Like surfing the internet, intuitive web pages easily guide the
user through the full set of extensive access control
functionality, reducing training time for both installer and user.
As security needs grow, NetAXS-123 can be expanded
up to a 93 door stand-alone system, all manageable via
one web browser. In stand alone applications, energy
costs can be saved as there is no need for a dedicated
PC to run 24/7. As an option for a remote managed
solution, WIN-PAK™ PRO Central Station can be applied
to NetAXS-123 and in addition, a basic stand alone
NetAXS-123 system can easily grow to an integrated
security solution using WIN-PAK™. All these growth
opportunities can be made without loss of investments.
Video add on opportunity
NetAXS-123 can be very easily expanded with event
based IP Video recording and quad live view via the
NetAXS-123 web interface, eliminating the need for
external recording devices such as NVRs or DVRs.
Further information is available on the NetAXS-123 Video
Add-on Kit datasheet.
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
M A N A G E M E N T F E AT U R E S U S I N G T H E W E B B R O W S E R
User Friendly
Uploads and Maintenance
Easy to use landing page provides a user-friendly
experience so you can provide end user training in less
than 30 minutes. Whether you're showing customers how
to set up access levels, or teaching them how to add or
delete cards, everything you need is all located on one
page. Simply log into your IP address and navigate the
system like you would any other Internet site.
From the File Management tab in the Configuration System
selection view, you can see the range of data sets that you
can get from NetAXS-123.
Dynamic Screen Updates
Door Access Modes and Options
With NetAXS-123, dynamic screens refresh data
automatically without having to refresh the page. This allows
status updates to be pushed out to the web screens
automatically, without user interaction.
NetAXS-123 allows you to assign different levels of access
to cardholders.
Alarms, events, inputs, outputs and status screens all
automatically update as information is received - great for
service monitoring purposes.
Data transfer between the controller and web browsers has
been optimised to reduce bandwidth requirements,
improving screen response times.
This includes the ability to save copies of the card
database and panel configuration database that are helpful
files to keep as backups or templates. Alarms and events
can also be retrieved from NetAXS-123 for record keeping
or analysis offline. Card reports are available in CSV format
and can be edited using Microsoft Excel and then
downloaded to NetAXS-123.
Supervisor access allows an employee to present their card
once to the reader to give individual access. If the supervisor
presents their card twice, they enable access for their team
during the specified time zone.
Escort access requires a supervisor escort for a
non-supervisor cardholder. The supervisor must present
his card first, then the non-supervisor must present
his card within ten seconds of the supervisor's card read.
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
ENCLOSURE OPTIONS
Compact Plastic Enclosure
• For 1 or 2 doors
• Power over Ethernet (PoE) option
• Using PoE, the panel lock output can power one 12 VDC low power door locking device
Control Panel (NXC1)
• Ethernet Port: Connect to web browser
or WIN-PAK software
• RS485: Connect panels downstream
and/or connect to WIN-PAK software
• USB Port: Easy set-up and diagnostics
from your laptop
• Colour coded terminal labels
• Removable terminal blocks
PoE or 12 VDC Powered
Standard Metal Enclosure
• For 1, 2 or 3 doors
Built-in Tamper Switch
Multiple Tie-Down and Grounding Points
• Cleaner and more consistent installations
• The panel lock output can power
up to three 12 VDC
4 A, 12 VDC Power Supply
door locking devices
• Universal input (100-240 VAC)
• 3.5 A available to power accessories
- over 1 A to power each door
Terminal Block
with Input Fuse
12VDC 7AH
Battery
ADD-ON BOARDS
One Door Add-on Board
• One extra door for controller in plastic and
metal enclosure
• The lock output can power one 12 VDC
door locking device
Two Door Add-on Board
• Two extra doors for controller in metal enclosure
• The lock output can power up to two 12 VDC
door locking devices
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
SYSTEM OVERVIEW
1 Also compatible with WIN-PAK® XE, WIN-PAK® SE, WIN-PAK® PE and
WIN-PAK® PRO CS (Managed Access)
2 When using an IN and OUT reader, BOTH readers must have HOLD lines
3 450 mA, 12 VDC is maximum available to power strike, reader(s) and
input devices when using a 802.3af PoE connection. If unit is externally
powered with a 12 VDC supply, higher current is available.
4 USB compatibility for local configuration
5 1-door add-on board compatible with compact plastic enclosure
6 Requires external power when used in compact plastic enclosure
7 2-door add-on board is not compatible with compact plastic enclosure
8 When mixing NetAXS-123 and 4-door NetAXS (NetAXS-4) controllers,
the NetAXS-123 must be configured as the first panel or gateway
Elements inside the red dotted line are not permanently required.
Connecting NetAXS-123 to a network enables remote and
local management opportunities.
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
SYSTEM OVERVIEW
1 Also compatible with WIN-PAK® XE, WIN-PAK® SE, WIN-PAK® PE and
WIN-PAK® PRO CS (Managed Access)
2 When using an IN and OUT reader, BOTH readers must have HOLD lines
3 450 mA, 12 VDC is maximum available to power strike, reader(s) and
input devices when using a 802.3af PoE connection. If unit is externally
powered with a 12 VDC supply, higher current is available.
4 USB compatibility for local configuration
5 1-door add-on board compatible with compact plastic enclosure
6 Requires external power when used in compact plastic enclosure
7 2-door add-on board is not compatible with compact plastic enclosure
8 When mixing NetAXS-123 and 4-door NetAXS (NetAXS-4) controllers,
the NetAXS-123 must be configured as the first panel or gateway
Elements inside the red dotted line are not permanently required.
Connecting NetAXS-123 to a network enables remote and local
management opportunities.
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
NetAXS-123
OUTPUTS
READERS / DOORS
NX1P
Door/Reader Capability
Expandability
1, 4
1 Door Controller
INPUTS
POWER INPUT
POWER OUTPUT
NXD2
1 additional Door
2 additional Doors
2,3
N/A
Dual Reader Control Capability
(IN/OUT Reader per Door)
Reader Compatibility
Standard Wiegand protocol supported
ABA not supported
Number of Outputs
Two SPDT relays (jumper selectable NO or NC contacts) per door rated at 3 A @ 28 VDC
Two open collector outputs (OC) (16 ma, 12 VDC): reader LED (Aux) and reader buzzer (Aux) per door are available.
Output Expandability
2-door solution has 8 total
outputs: 4 relays, 4 OC
(requires NXD1 add-on board)
Input Expandability
2-door solution has 8 total
outputs: 4 relays, 4 OC (requires
NXD1 add-on board) 3-door
solution has 12 total outputs:
6 relays, 6 OC (requires NXD2
add-on board)
N/A
Selectable: +12 VDC self-powered - OR - 0 to 28 VDC externally supplied source
Controller has a total of six configurable four-state supervised input
points. (Factory default settings are Status, REX, Reader Tamper A,
Reader Tamper B, Power Fail and General Input)
2-door solution has a
total of 10 inputs
(requires NXD1 add-on board)
Power-Fail and Panel Tamper
ENCLOSURE
NXD1
YES5 – IN and OUT reader capability per door
(readers must have HOLD line capability)
Number of Inputs
INSTALLATION
NX1MPS
1, 2 or 3 Door Controller
(NXD1 or NXD2 add-on board is
required for 2nd or 3rd door)
Expandable up to 93 DoorS (186 readers) per controller loop
Relay Power Source
SYSTEM INFORMATION
Add-on Boards
Add-on board has a total of four configurable four-state
supervised input points per door. (Factory default settings
are Status, REX, Reader Tamper A, and Reader Tamper B)
2-door solution has a total of
10 inputs (requires NXD1 add-on
board). 3-door solution has a
total of 14 inputs (requires NXD2
add-on board)
N/A
Yes
N/A
'Off the Wall' Tamper Capability
Yes
N/A
N/A
Unit Input
Power over Ethernet (PoE)
802.3af or external
12 VDC supply
93 VAC to 264 VAC,
50/60 Hz input
provides 12 VDC, 4 A output
N/A
Socket or Hardwire AC Input
N/A
Yes
N/A
Control Board Power Input
Power over Ethernet (PoE)
or +12 VDC
+12 VDC from included
power supply
N/A
Power for Reader(s),
Input Devices and locks / strikes
450 mA, 12 VDC is available to
power strike, reader(s) and
1.15 A per door for locks/strikes,
input devices when using PoE
readers and input devices
If higher current is needed,
(3.5 A @ 12 VDC total)
power by external 12 VDC supply
1.15 A @ 12VDC per door for locks/strikes, readers and
input devices when externally powered or powered by the
built in power supply
Back-up Battery System
External6 12 VDC
7 AH battery 12 VDC
Dependent on controller enclosure
Material
High Impact Plastic
Metal
Dependent on controller enclosure
Size
196.85H x 196.85W x 69.85D
(mm)
353.06H x 302.26W x 119.38D
(mm)
Dependent on controller enclosure
Wiring Access Holes/Knockouts
7
19
N/A
Removable Terminal Blocks
with Colour Coded Labels
Yes
Graphic Wiring Cards / Labels
Yes
Captive Mounting Hardware
Yes
Yes
N/A
Cable Shield Termination Points
No
Yes
Dependent on controller enclosure
Real Time Clock
Global Geographic Time Zone Support
Daylight Saving Time Support
Clock Synchronisation
Yes - via NTP network server
Processor
Freescale Coldfire 32-bit
System MTBF
(mean time between failures)
250,000 hours
Temperature Ratings
0°C to 49°C Operating, -55°C to +85°C Storage
Certifications and Approvals
CE and FCC compliant
UL-294 listing pending
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
NetAXS-123
Add-on Boards
COMMS
LEDs
NX1P
HOST
DOOR
CONTROL
CARDS and DATABASE
REPORTING
and
ANALYSIS
NXD2
Status LEDs
Built-in Communication Options
Ethernet, USB8, RS485
Direct to controller
I/O Expansion Module
Connectivity
N/A
Controller Loop Capability
Total of 31 panels in a loop2,3
9
WIN-PAK XE, WIN-PAK SE, WIN-PAK PE, WIN-PAK PRO CS, WIN-PAK CS 4.1
WIN-PAK 2005, WIN-PAK PRO 2005, WIN-PAK 2.0 Release 4, WIN-PAK PRO Release 4
NetAXS-123 as Gateway Panel
Supported downstream panels include NetAXS-123 and NetAXS-4
N/A
NetAXS-4 as Gateway Panel
Currently supported downstream panels include NetAXS-4 only
N/A
using PCI3 Converter
Supported downstream panels include NetAXS-123,
NetAXS-4, N-1000 family and NS2
N/A
Not compatible with NetAXS-123 or NetAXS-4
N/A
using N-485-PCI-2 Converter
EMBEDDED
WEB SERVER
NXD1
2 + 4 LEDs per door (power, reader(s),
door state, run, relay status)
Software Compatibility
WORLDWIDE
ACCEPTABILITY
NX1MPS
12 LEDs total (12V power, PoE, over current, Ethernet, RS485,
reader(s), door state, run, relay status)
Door Control Modes
Card only, card and PIN, card or PIN, PIN only, lockdown, disabled, supervisor, escort, limited use card, expire on date,
first card rule, snow day rule, time zone toggle, anti-passback, duress 5
Interlocks for custom actions
Yes
Anti-Passback Capability
Local and global capability, hard and soft implementation
5
NetAXS-123 allows anti-passback using In and Out readers per door (local and global)
Card and Event Buffer Capacity
10,000 card capacity, 25,000 event capacity
Firmware Revision
Offline Database back-up available
On-board flash memory for field firmware revision updates and feature expansion
Card and configuration databases
Export Capabilities
Card database, alarms and events (CSV format)5
Number of Card Formats
128 unique card formats can be supported5
Site Codes
8
Maximum Card Format Size
75-bit (maximum card # = 64-bits)5,7
Time Zones
1275
Access Levels
128
Holidays
2555
Integrated basic reports
Yes
Via Controller
Import/export of card database
Alarms and events can be
exported and saved in offline
storage
Supported Browsers
Yes
Via Controller
Yes
Via Controller
Internet Explorer and Mozilla Firefox
Via Controller
Icon Driven Landing Page
Yes
Via Controller
Web Browser Control
Full control monitor and view live events
manually control doors and readers
Via Controller
Web Server Support
Secure Web Browsing
Dynamic Screen Refresh
Multiple user connections
All access control functions
SSL and SHA-1 secure socket layer encryption
Yes
Yes
Via
Via
Via
Via
Controller
Controller
Controller
Controller
Global Languages Supported
English, Italian, French, Dutch, Spanish, Czech, Russian, Danish, Portuguese, Simplified Chinese and Arabic
Printed Documentation
English, Italian, French, Dutch, Spanish, Czech, Simplified Chinese and Arabic
Quick Start Guides
Yes
Full User and Installation Guides
Multi-Language Basic
Installation Guides
On product CD
User Translated Files
Universal Power Supply Input
Yes
Customer ability to export, import, modify, create and add language files.
Can be selected for use with unique login accounts.
Power over Ethernet (PoE)
Yes
Via Controller
802.3af
93-264 VAC, 50/60 Hz input
1 A second door may be added with a NXD1 add-on board however, PoE power restrictions
apply (see footnote 4).
2 A total of 31 NetAXS-123 and NetAXS-4 panels may be combined in a controller loop for a
maximum of 123 doors.
3 When mixing NetAXS-123 and NetAXS-4 controllers, the NetAXS-123 must be the
gateway panel.
4 450 mA, 12 VDC is maximum current available to power strike, reader(s) and input
devices when using a 802.3af PoE connection. If unit is externally powered, higher current
is available.
5 When using WIN-PAK software, this feature may have limitations or not exist.
6 An external UPS is required to power the PoE power source for battery back-up.
7 Suitable for handling the 75-bit transparent card format of PIV, TWIC and FRAC cards.
8 USB port for setup and troubleshooting. USB port not available when used with
Video add on kit.
9 Natively integrated in WIN-PAK XE, SE 3.0, PE 3.0 (build 670.16 and higher);
NetAXS-123 and NetAXS-4 must be configured as a N-1000-IV-X in WIN-PAK builds
older than 670.16).
NetAXS-123
Stand-alone, Modular, Web-enabled Access Control System
ORDERING
Part Number
Description
NetAXS-123
1 Door Solutions
NX1P
One door, compact (plastic) enclosure - PoE or external 12 VDC power supply required
NX1MPS
One door, standard (metal) enclosure with tamper switch and terminal block. Includes 4 A, 12 VDC output/
100-240 VAC input power supply and 12V, 7 AH battery
2 Door Solutions
NX2P
Two door, compact (plastic) enclosure - External 12 VDC power supply required
NX2MPS
Two door, standard (metal) enclosure with tamper switch and terminal block. Includes 4 A, 12 VDC output/
100-240 VAC input power supply and 12V, 7 AH battery
3 Door Solutions
NX3MPS
Three door, standard (metal) enclosure with tamper switch and terminal block. Includes 4 A, 12 VDC output/
100-240 VAC input power supply and 12V, 7 AH battery
Add-on Boards (For 1 and 2 door expansions)
NXD1*
One door add-on board (Adds 1 door to your existing 1-door system = 2 doors)
NXD2**
Two door add-on board (Adds 2 doors to your existing 1-door system = 3 doors)
OmniClass™ Readers
OM30BHONCS
OmniClass mini-mullion reader, black 55 mA typ/113 mA max @ 12 VDC
OM45BHONCS
OmniClass single gang reader, black 55 mA typ/121 mA max @ 12 VDC
OM55BHONCS
OmniClass single gang reader, black with keypad 85 mA typ/116 mA max @ 12 VDC
Cards
OKP0N34
34-Bit, printable PVC card, proximity
PXKEYH16K16
34-Bit, key fob, proximity
* Requires external power when used in compact plastic enclosure
** 2-door add-on board is not compatible with compact plastic enclosure
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/za
Honeywell Security Group
5 Platinum Close
Longmeadow Business Estate East
Modderfontein, Johannesburg
South Africa
Tel: +27 (0)11 574 2522
www.honeywell.com
HAS-NA123-02-ZA(1212)DS-E
December 2012
© 2012 Honeywell International Inc.