PL Series part number system Straight plug and inline receptacle PL XX X X X X X XX Push pull plastic Number of contacts: 02= 2Pin 03= 3Pin 05= 5Pin 06= 6Pin 08= 8Pin 09= 9Pin 14= 14Pin Straight plug In-line receptacle A1= straight plug with cable collet ---- solder contact A3= straight plug with cable collet and nut for fitting a bend relief ---- solder contact C1= In-line receptacle with cable collet ---- solder contact C3= In-line receptacle with cable collet and nut for fitting a bend relief ---- solder contact Outer shell material: G= Grey PSU(standard) B= Black PSU 04= 4Pin 07= 7Pin 10= 10Pin Coding: 0= 0˚ (standard) A= 40˚ C=60˚ E= 80˚ H= 170˚ J=205˚ Cable collet: 1=ø3.9mm (cable ø=2.7~3.9mm) 2=ø5.2mm (cable ø=4.0~5.2mm) 3=ø6.5mm (cable ø=5.3~6.5mm) F= Black PEI P=Grey PEI Back nut color: 0= Black 1= White 2= Red 4= Yellow 5= Green 6= Blue 8= Grey Contact plating: 2= Gold plating 20u’’ For A3 and C3 type, please order bend relief separately. Receptacle PL XX X X X X X XX Number of contacts: 02= 2Pin 03= 3Pin 04= 4Pin 05= 5Pin 06= 6Pin 07= 7Pin 08= 8Pin 09= 9Pin 10= 10Pin 14= 14Pin Push pull plastic Receptacle B1= Receptacle with two nuts (back panel mounting) ----solder contact B3= Receptacle with two nuts, (back panel mounting) ----with 90 degree PCB contact B4= Receptacle, front nut fixing ----solder contact Outer shell material: G= Grey PSU(standard) B= Black PSU Coding: 0= 0˚ (standard) A= 40˚ C=60˚ E= 80˚ H= 170˚ J=205 F= Black PEI P=Grey PEI Back nut color: 0= Black 1= White 2= Red 5= Green 6= Blue 8= Grey Cable collet: 0= no cable collet Contact plating: 2= Gold plating 20u’’ 4= Yellow Bend relief PL Push pull plastic Bend relief Color: 0= Black 2= Red 3= White www.ittcannon.com 4= Yellow 5= Green 6= Blue 8= Grey BR X Cable n (mm) XXX0 Min Max 025 >2.5 3 030 >3.0 3.5 035 >3.5 4 040 >4.0 4.5 045 >4.5 5 050 >5.0 5.5 055 >5.5 6 060 >6.0 6.5