LatticeECP3 Versa Evaluation Board User's Guide


LatticeECP3 Versa Evaluation Board
User’s Guide
July 2013
Revision: EB62_01.6

LatticeECP3 Versa Evaluation Board
User’s Guide
Introduction
The LatticeECP3™ Versa Evaluation Board allows designers to investigate and experiment with the features of the
LatticeECP3 Field-Programmable Gate Array. The features of the LatticeECP3 Versa Evaluation Board can assist
engineers with rapid prototyping and testing of their specific designs. The LatticeECP3 Versa Evaluation Board is
part of the LatticeECP3 Versa Development Kit. The guide is intended to be referenced in conjunction with demo
user’s guides to demonstrate the LatticeECP3 FPGA.
Figure 1. LatticeECP3 Versa Evaluation Board, Top Side
GSRn &
LED
PROGRAMn
Push-buttons Display
SERDES Test
DDR3
SMA Connectors Memory
Expansion Connectors
User
Switches
Status LEDs
USB
Programming
J3 – JTAG
Interface
J13 – JTAG
Interface
10/100/1000
RJ-45
Connections
On-Board
Clock
Management
SPI Flash
Configuration
Memory
PCI Express x1
Features
• Half-length PCI Express form-factor
– Allows demonstration of PCI Express x1 interconnection
• Electrical testing of one full-duplex SERDES channel via SMA connections
• USB-B connection for UART and device programming
• Two RJ45 interfaces to 10/100/1000 Ethernet to GMII
• On-board Boot Flash
– 64M Serial SPI Flash
• DDR3-1333 memory components (64Mb/x16)
• Expansion mezzanine interconnection for prototyping
• 14-segment alpha-numeric display
• Switches, LEDs and displays for demo purposes
• ispVM™ programming support
• On-board reference clock sources
2
12V DC
Power Input
LatticeECP3 Versa Evaluation Board
User’s Guide
The contents of this user’s guide include top-level functional descriptions of the various portions of the evaluation
board, descriptions of the on-board connectors, diodes and switches and a complete set of schematics.
Caution: The LatticeECP3 Versa Evaluation Board contains ESD-sensitive components. ESD safe practices should
be followed while handling and using the evaluation board.
LatticeECP3 Device
This board features a LatticeECP3 FPGA with a 1.2V core supply. It can accommodate all pin-compatible
LatticeECP3 devices in the 484-ball fpBGA (1mm pitch) package. A complete description of this device can be
found in the LatticeECP3 Family Data Sheet.
Note: The connections referenced in this document refer to the LFE3-35EA-8FN484C device.
Applying Power to the Board
The LatticeECP3 Versa Evaluation Board is ready to power on. The board can be supplied with power from a PCI
Express host system or standalone with an external wall power module.
The 12V DC input power source is fused with a surface mounted fuse, as noted in Table 1.
Table 1. Board Power Supply Fuses – (See Appendix B, Figure 12)
Fuse Designator
F1
Description
12V Input Supply Fuse
The board may be plugged into a host PC. Only plug the board into a PCI Express slot when the system is powered
off. Once inserted, the PC can be safely powered on.
Using the evaluation board outside of a PC chassis supply requires the factory-supplied wall supply module. Use of
other supplies is not suggested. GME Technology’s GFP181DA-1215B-1 (or equivalent) is provided with the
LatticeECP3 Versa Development Kit.
Figure 2. Power Distribution Scheme – (See Appendix B, Figure 12)
EN
LDO
SW
12_0V
(5A fused)
Power Status LED D13
SERDES 1_2V, +1.2V, 1A, Power Status LED D12
2_5V, +2.5V, 1.1 A, Power Status LED D31
EN
SW
3_3V, +3.3V, 1.35 A, Power Status LED D9
SW
1_5V, +1.5V, 1.1 A, Power Status LED D11
EN
SW
VCC_CORE, +1.2V, 1.35 A, Power Status LED D10
Programming/FPGA Configuration
The LatticeECP3 Versa Evaluation Board has a built-in download controller for programming the LatticeECP3
FPGA. The built-in module consists of a USB Type-B connector and a USB UART device. To use the built-in download cable, simply connect a standard USB cable (a USB-B to USB-A cable is included with the LatticeECP3 Versa
Development Kit) from J2 to your PC (with ispVM System software installed). The USB hub on the PC will detect
the addition of the USB function, making the built-in cable available for use with the ispVM System software. The
USB cable is connected in parallel to J3.
3
LatticeECP3 Versa Evaluation Board
User’s Guide
Alternate ispVM Download Interface
J3 is a 1x10 100mil header that is provided for use with an external Lattice download cable (available separately).
A USB download cable can be attached to the board using J3 to interface with the FPGA (U1).
Note: Resistors R38, R33, R32 and R36 need to be removed.
A separate header is provided to interface to a download cable for the ispClock™5406A clock device (U13). U13 is
not interfaced to the built-in download interface. U13 is factory-programmed for use with the reference designs and
should only be altered for customized designs.
A 10-pin JTAG connector is used in conjunction with the ispVM USB download cable to program and control the
device. A separate 10-pin header (J14) is provided for programming U13.
Table 2. ispVM JTAG Connector Pinout (J3 and J14) – (See Appendix B, Figure 5)
Pin
Function
Color
1
PWR
Red
2
TDO
Brown
3
TDI
Orange
4
N/C
—
5
N/C
—
6
TMS
Purple
7
GND
Black
8
TCK
White
9
N/C
—
10
N/C
—
ispVM Requirements
Note: An ispDOWNLOAD™ cable is included with Lattice Diamond® design software. This cable is not needed for
the typical use of this board since it includes the built-in download module and only requires the USB cable
included with the board. Standalone ispVM download cables may be purchased separately from Lattice.
After initial board setup, use the following procedure to program the board. Instructions assume that ispVM software has been installed on a local PC.
Requirements:
• PC with ispVM System 18.0 (or later) programming software, installed with appropriate drivers (USB driver for
USB cable, Windows 7/XP/2000/NT parallel port driver for ispDOWNLOAD cable).
Note: An option to install these drivers is included as part of the ispVM System setup.
• ispDOWNLOAD cable (pDS4102-DL2A, HW7265-DL3A, HW-USB-1A, etc.). Required only for alternative FPGA
programming and ispClock5406A reprogramming.
4
LatticeECP3 Versa Evaluation Board
User’s Guide
Board Programming
Configuration Status Indicators
(see Appendix B, Figure 13)
Figure 3. LatticeECP3 Status LEDs and Push-button Controls
The LEDs indicate the configuration status of the LatticeECP3 FPGA.
• D17 (red) illuminated indicates that programming was aborted or reinitialized, driving the INITN output low.
• D20 (green) illuminated indicates the successful completion of configuration by releasing the open collector
DONE output pin.
• D19 (red) illuminated indicates that PROGRAMN is low.
• D18 (red) illuminated indicates that GSRN is low.
PROGRAMN and GSRN
These push-button switches assert/de-assert the logic levels on PROGRAMN (SW2) and GSRN (SW1). Depressing the button drives a logic level “0” to the device.
Programming Serial SPI Flash Memory
A serial SPI (16-pin TSSOP, 64M) Flash memory device (U8) is on-board for non-volatile configuration memory
storage. A STMicro M25P64VMF16 device is populated on-board.
The Serial SPI Flash memory device can be configured easily via its JTAG port. This mode enables the FPGA to
be programmed at power-up or assertion of PROGRAMN with a bitstream stored in the memory device.
1. Connect the LatticeECP3 Versa Evaluation Board.
2. In the dialog box, select SPI Flash Programming Mode in the Device Access Option pull-down menu.
5
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 4. Device Information Dialog Screen
3. The SPI Serial Flash Device dialog box will open. In this box, select SPI Flash Erase, Program, Verify in the
Operation pull-down menu.
4. Select SPI Serial Flash in the Device Family pull-down menu, STMicro under the Vendor pull-down menu,
SPI-M2564 under the Device pull-down menu, and 16-lead SOIC under the Package submenu.
Figure 5. Select Device Dialog Box
6
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 6. Sample SPI Serial Flash Device Dialog Box
5. Click OK in the SPI Serial Flash Device dialog box. Then click OK in the Select Device dialog box. You will
return to the main configuration screen
6. From the main programming window, select Go from the top toolbar. This will begin the SPI Serial Flash programming.
On-Board Clock Capabilities
(See Appendix B, Figure 19)
The LatticeECP3 Versa Evaluation Board allows for several clock source options. Some of these options are controlled via the ispClock5406A programmable clock manager device. The ispClock5406A enables the reference
clock from the PCI Express interface to provide a reference clock to the SERDES. This is true only when the board
is in a PCI Express host socket. When the board is not in a PCI Express host socket, the clock will be supplied by a
156.25 MHz clock on-board oscillator. Both clock inputs can be fanned out to the dedicated SERDES reference
inputs, FPGA inputs, and to the expansion connectors. The factory default programming only connects the
SERDES reference clock inputs. Factory-defined demonstration designs will control and manage the clock.
Figure 7. Clock Controller Scheme
FPGA
Clock
Clock Select
PCI Express
156.25 MHz
On-board
Oscillator
SERDES
Reference
Clock
PCLKT0
F11
PCLKC0
F12
REFCLKP
V12
Factory Default
Clock Programming
REFCLKN
V11
SERDES Reference
Clock Only
Expansion Interface
Clock
7
LatticeECP3 Versa Evaluation Board
User’s Guide
General Purpose Clock Source
An on-board 100MHz LVDS oscillator is provided for general purpose use. This clock source is connected to differential inputs L5 and K6 and must be used as LVDS inputs to the FPGA. This pin pair also provides optimal interface
to the FPGA PLL for customized use.
The PCI Express add-in card specification requires add-in boards to include capabilities to tell the host of its presence. The LatticeECP3 Versa Evaluation Board allows this optional connection via a board jumper. The factory
default will have two jumpers installed as shown below for the PRSNT connection to the PCI Express host.
Figure 8. PCI Express PRSNT Control Connection
J4
1
2
3
4
5
6
PCI Express PRSNT
Jumper Selector
SERDES
The LatticeECP3 quad-based SERDES FPGA is utilized on the board for several purposes. The PCSA quad is provisioned to provide a single, full-duplex PCI Express channel. The high-speed signals are connected to the PCI
Express edge connection.
Table 3. PCI Express Channel Interconnections
PETp0
HDINP0
Y15
PETn0
HDINN0
Y14
PERp0
HDOUTP0
AB15
PERn0
HDOUTN0
AB14
J5
HDINP3
Y8
Table 4. SMA Test Interconnections
J6
HDINN0
Y9
J7
HDOUTP3
AB8
J8
HDOUTN3
AB9
FPGA Test Pins
(see Appendix B, Figure 18)
General Purpose DIP Switches
General purpose FPGA pins are available for user applications. FPGA pins are connected to switch SW3, a SPST
slide-actuated DIP switch. The switches are connected to logic level 0 when moved to the ON position. Switch position 1 is indicated with a dot. These inputs are within a bank connected to 1.5V. The user must program these
inputs to be the LVCMOS15 type in the design.
8
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 9. LatticeECP3 Versa Evaluation Board LEDs and Switches
The designated pins are connected according to Table 5.
Table 5. FPGA Ball to DIP Switch Position
FPGA Ball
Number
SW3 DIP Switch
Position
J7
1
J6
2
H2
3
H3
4
J3
5
K3
6
J2
7
J1
8
General Purpose LEDs
(See Appendix B, Figure 18)
The LEDs provided on the LatticeECP3 Versa Evaluation Board are connected to general purpose FPGA I/Os.
These LEDs provide status for user designs and must be included in the design. The LEDs illuminate when the
FPGA output is driven LOW. Table 6 shows the LED and associated FPGA pins. These pins are within an I/O bank
connected to 3.3V and the user should program these to be LVCMOS33 type outputs in the design.
Table 6. LED Definitions
LED
Number
FPGA Ball
Number
PCB
Designator
LED Color
LED0
U19
D21
Green
LED1
U18
D22
Green
LED2
AA21
D24
Yellow
LED3
Y20
D25
Yellow
LED4
W19
D26
Red
LED5
V19
D27
Red
LED6
AA20
D29
Blue
LED7
AB20
D28
Blue
9
LatticeECP3 Versa Evaluation Board
User’s Guide
Alpha-numeric LED Display
(see Appendix A, Figure 18)
A 14-segment alpha-numeric display is provided on the board (D23). These LED segments are connected to general-purpose FPGA I/Os. The LEDs must be included in the FPGA design. The LEDs illuminate when the FPGA
output is driven LOW. Table 7 shows the LED and associated FPGA pins. These pins are within an I/O bank connected to 3.3V and the user should program these to be LVCMOS33 outputs in the design.
Figure 10. 14-Segment Display
Table 7. Alpha-numeric LED Definitions
Display
fpBGA Ball
Number
Display
fpBGA Ball
Number
A
V6
J
AB3
B
U7
K
AB4
C
Y6
L
W4
D
Aa6
M
Y5
E
U8
N
AA4
F
T8
P
AA5
G
R9
DP
W5
H
T9
DDR3 Memory Device
(see Appendix B, Figure 17)
• The LatticeECP3 Versa Evaluation Board is equipped with a SDRAM memory device (1.5V, 64Mb/x16, 96-ball
FBGA, 667 MHz, DDR3-1333) such as the Micron MT41J64M16JT-15E:G device.
• The DDR3 memory includes a 16-bit wide memory controller interface.
• The board includes termination of data, address and command signals. It includes all power and external components needed to demonstrate the memory controller of the LatticeECP3 device.
• A 100 MHz on-board clock oscillator is available to provide a DDR3 reference clock.
10
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 8. DDR3 Memory Controller Interconnections
NETNAME
484 fpBGA
Ball Number
NETNAME
484 fpBGA
Ball Number
DQ0
E5
A0
C8
DQ1
E4
A1
C7
DQ2
D2
A2
B7
DQ3
D1
A3
D8
DQ4
C2
A4
F9
DQ5
B2
A5
E9
DQ6
G5
A6
A3
DQ7
G4
A7
D7
DQ8
G2
A8
A7
DQ9
F1
A9
B8
DQ10
H4
A10
C9
DQ11
E2
A11
C10
DQ12
J4
K_0
K4
DQ13
B1
K_0#
K5
DQ14
C1
CAS#
A4
DQ15
G3
BA0
B4
DQS0
F5
BA1
E6
DQS0#
F4
BA2
D5
DQS1
H5
ODT
E7
DQS1#
H6
CS0#
C6
CEO
G8
WE#
D6
RAS#
A6
VREF
E1
CLKP
L5
DM0
E3
CLKN
K6
DM1
F3
Ethernet Interfaces
(see Appendix B, Figure 18)
Two Marvell 88E1119R Gigabit Ethernet transceiver devices (U17) are included on the board. This physical layer
device supports 1000BASE-T, 100BASE-TX, and 10BASE-T applications via a standard media interface to a dual
RJ45 connection. The RJ45 connection includes network magnetics providing the proper signal conditioning, electro-magnetic interference suppression and signal isolation. This connector includes two LEDs and the board
includes four status LEDs from the Marvell device. The LEDs are register-programmed and detailed descriptions
are available in the Marvell device data sheet.
Table 9. PHY Status Indicators
LED
Status Description
RJ45 (Yellow)
LED RX
RJ45 (Yellow)
LED TX
Each Marvell 88E1119R device communicates via a GMII interface to the LatticeECP3 device.
11
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 10. FPGA GPIO to GMII Interfaces
Signal
PHY#1
PHY#2
RSTN
L3
R21
MDIO
L2
U16
MDC:
V4
Y18
RXC
L4
N19
RX_ER
M4
V20
RX_DV
M1
U15
RX_D0
M5
AB17
RX-D1
N1
AA17
RX_D2
N6
R19
RX_D3
P6
V21
RX_D4
T2
T17
RX_D5
R2
R18
RX_D6
P5
W21
RX_D7
P3
Y21
TXC
C12
M21
TX_EN
V3
V22
TX_D0
V1
W22
TX_D1
U1
R16
TX_D2
R3
P17
TX_D3
P1
Y22
TX_D4
N5
T21
TX_D5
N3
U22
TX_D6
N4
P20
TX_D7
N2
U20
GTXCLK
M2
M19
CRS
P4
P19
COL
R1
N18
COMA
R41
T151
125CLK
T3
R17
1. Each PHY device includes a header dedicated to the COMA connection to the device.
The header is populated with a jumper that disables and places the PHY in a low power
configuration. Headers J10 and J12 are used for this purpose. It is assigned to PHYs U9
and U10, respectively.
12
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 11. Expansion Connections
x3 Expansion Connector
x4 Expansion Connector
Pin
Signal
484-Ball fpBGA
Pin
Signal
484-Ball fpBGA
1
GND
GND
1
HPE-RST#
J20
2
NC
NC
2
GND
GND
3
2.5V
2.5V
3
IO0
B11
4
IO29
D17
4
IO1
B12
5
IO30
J22
5
IO2
A12
6
IO31
K22
6
IO3
A13
7
IO32
L18
7
IO4
E12
8
IO33
L19
8
IO5
E13
9
IO34
L22
9
IO6
C13
10
IO35
M22
10
IO7
C14
11
IO36
K18
11
IO8
D13
12
IO37
K17
12
IO9
D14
13
IO38
H22
13
IO10
A14
14
IO39
H21
14
IO11
B14
15
IO40
G22
15
IO12
F13
16
IO41
G21
16
IO13
F14
17
IO42
J18
17
IO14
A15
18
IO43
J17
18
IO15
B15
19
IO44
F22
19
GND
GND
20
IO45
E22
20
3.3V
3.3V
21
5VIN
5VIN
21
IO16
C15
22
GND
GND
22
GND
GND
23
2.5V
2.5V
23
IO17
D15
24
GND
GND
24
GND
GND
25
3.3V
3.3V
25
IO18
G15
26
GND
GND
26
GND
GND
27
3.3V
3.3V
27
IO19
G14
28
GND
GND
28
IO20
A16
29
OSC
U13 PIN27
29
IO21
B16
30
GND
GND
30
GND
GND
31
CLKIN
E15
31
IO22
F15
32
GND
GND
32
IO23
F16
33
CLKOUT
D12
33
IO24
A17
34
GND
GND
34
GND
GND
35
3.3V
3.3V
35
IO25
B18
36
GND
GND
36
IO26
A18
37
3.3V
3.3V
37
IO27
A19
38
GND
GND
38
CARDSEL#
J19
39
3.3V
3.3V
39
IO28
D16
40
GND
GND
40
GND
GND
13
LatticeECP3 Versa Evaluation Board
User’s Guide
References
• DS1021, LatticeECP3 Family Data Sheet
• HB1009, LatticeECP3 Family Handbook
• QS013, LatticeECP3 Versa Evaluation Board Quick Start Guide
• UG46, PCI Express Demos for the LatticeECP3 Versa Evaluation Board
• UG45, DDR3 Demo for the LatticeECP3 Versa Evaluation Board
• UG44, SERDES Eye/Backplane Demo for the LatticeECP3 Versa Evaluation Board
Ordering Information
Description
LatticeECP3 Versa Evaluation Board
Ordering Part Number
LFE3-35EA-VERSA-EVN
14
China RoHS Environment-Friendly
Use Period (EFUP)
LatticeECP3 Versa Evaluation Board
User’s Guide
Technical Support Assistance
e-mail:
[email protected]
Internet: www.latticesemi.com
Revision History
Date
Version
Change Summary
April 2011
01.0
Initial release.
August 2011
01.1
Updated LatticeECP3 Versa Evaluation Board, Top Side diagram.
Corrected ispVM System software version number in the ispVM
Requirements text section.
Corrected ispVM JTAG Connector Pinout table caption information.
November 2011
01.2
Corrected error in the column headings of the Expansion Connections
table.
February 2012
01.3
Updated document with new corporate logo.
February 2012
01.4
Expansion Connections table – Updated information for pins 31 and 33.
August 2012
01.5
Added alternate Abracon part numbers for Discera oscillators in Bill of
Materials.
July 2013
01.6
Added note in the Alternate ispVM Download Interface section.
Updated Technical Support Assistance information.
© 2013 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as
listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of
their respective holders. The specifications and information herein are subject to change without notice.
15
16
A
B
C
5
RefClk
156.25M OSC
PCIe
CLK5406
LED SEGMENT
ARRAY
4
100.00M
DIFF OSC
USER DIP
SWITCH
Device
Power
Pins
Power
DDR3
1.5V
16-Bit
Expansion Clk
General Clk
PCSA
RefClk
3.3V
GMII
PHY#1
PLL
4
REFERENCE
CLOCKS
3
PCIe
CH#0
Bank 6
Bank 7
X1
Bank
8
SMA Test
CH#3
SERDES
Bank 3
Bank 2
Bank 1
ECP3
FPGA
Bank 0
Expansion
Port- 3.3V
Designator U1 is the FPGA DUT.
3
2
Revision History:
February 9, 2011
February 24, 2011
USER LEDS
2
Date:
Size
B
Title
Monday, March 14, 2011
JPS
JPS
1
Sheet
1
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
ECP3 VERSA Eval Board
Project
1
Rev A Final Design
Rev B
Cover Page
3.3V Programming
SPI
3.3V
GMII
PHY#2
Expansion
Port-3.3V
PCSA
D
5
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Appendix A. Schematics
Figure 11. Cover Page
A
B
C
R5
10K-0402SMT
12_0V
(5A fused)
POWER INPUT
+11v to +16v
5
C21
10NF-0402SMT
VCCPLL
12_0V
TP4
F1251CT-ND
F1
C20
10NF-0402SMT
5A Fast-Blo SMT Socketed Fuse
12_0VIN
1
J1
TP1
D14
SCHOTTKY/VISHAY-V12P10
12_0VIN
Male Power Jack 2.1mm
3
PJ-032A
TP3
TP2
Data Sheet Version = 1.0
LFE3-35E-FN484CES
AB2
AA3
N15
K9
N9
K14
N14
M8
R11
H11
M15
R12
H12
L8
L15
VCCA
10NF-0402SMT
10NF-0402SMT
C22
C3
C23
C4
C33
C34
100NF-0402SMT
+
3_3V
C7
C25
C6
C24
C32
C5
C35
C8
100NF-0402SMT
10NF-0402SMT
+
C36
C9
3_3V
R25
12_0V
1_8K-1206SMT
LED_GREEN_0603
D13
12VIN GOOD
SW
4
1_8K-1206SMT
R22
Q1
2N2222/SOT23
2_5V
R27
1
10K-0603SMT
VCC_CORE
3
R28
1
10K-0603SMT
LED_GREEN_0603
D11
C52
220NF-0402SMT
16V
1_5V
12_0V
Q3
2N2222/SOT23
3_3V
R29
1
10K-0603SMT
1000pF-0402SMT
22
23
24
2
1
8
7
C37
10uF,25V-1206SMT
RLP-134
RT/SYNC
PG1
VC1
TRACK/SS1
FB1
SW1
R6
51K-0402SMT
R14
51K-0402SMT
RT/SYNC
PG1
VC1
TRACK/SS1
FB1
SW1
BOOST1
C27
2
3.3V
R26
220R-0603SMT
R179
220R-0603SMT
D9
LED_GREEN_0603
3_3V
PG2
VC2
TRACK/SS2
FB2
SW2
BOOST2
20
19
17
18
11
12
20
19
17
18
11
12
U4
LT3508EUF
12_0V
PG2
VC2
TRACK/SS2
FB2
SW2
BOOST2
U3
LT3508EUF
12_0V
DNI
3_3V
C44 1000pF-0402SMT
VCCA
C19
PCSA_VCCOB
C14
PCSA_VCCIB
C31
D2
1N4448W
C29
C28
+ C13
+ C18
FB2
2.5V
D31
+ C26
BOOST1
LED_GREEN_0603
2_5V
1%
22
23
24
2
1
8
7
C51
10uF,25V-1206SMT
RLP-134
DNI
FB1
BLM41PG600SN1
+1.2 v
500 mA
BLM41PG600SN1
C17
10uF,25V-1206SMT
VOUT2
R4
OPEN-0603SMT
2.3v minimum input voltage
0.46 v drop at 500 mA max
C56 1000pF-0402SMT
D5
1N4448W
LED_GREEN_0603
D12
VCCA
1.2V
Analog
R21
10K-0402SMT
1%
100pF-0402SMT
C245
R15
5_11K-0402SMT
1%
D7
DFLS220L
R24
1_8K-1206SMT
C63
22uF,6.3V-0805SMT
RLP-133
1.5V
C43
C12
3_3UF-10V-0805SMT
10V
2
R2
0R-0603SMT
10NF-0402SMT
C16
D1
1N4448W
8
9
7
6
10
3_3V
BYP2
ADJ2
C38
16V
220NF-0402SMT
R9
10K-0402SMT
1%
L3
4.7uH-SPD62R-472M
22uF,6.3V-0805SMT
RLP-133
C55
VCC_CORE
R23
1_8K-1206SMT
12_0V
Q2
2N2222/SOT23
D3
DFLS220L
R7
21_5K-0402SMT
1%
EN2
VOUT2
VOUT2_6
2_5V
Vout = 0.8*(R7/R9+1) = 2.52 v
C49
22uF,6.3V-0805SMT
RLP-133
BYP1
ADJ1
VOUT1
VOUT1_3
EN
U2
LT3029EDE
1
16
L1
4.7uH-SPD62R-472M
22uF,6.3V-0805SMT
RLP-133
C41
2.5V
Core Power
C54
22uF,6.3V-0805SMT
RLP-133
1.2v/ms
+1.2 v
1.35 A
C40
22uF,6.3V-0805SMT
RLP-133
1.2v/ms
BLM41PG600SN1
FB3
R3
OPEN-0603SMT
R1
0R-0603SMT
4
3
15
2_5V
Voltage Regulators
C15
10NF-0402SMT
C10
3_3UF-10V-0805SMT
10V
Vout = 0.8*(R15/R21+1) = 1.21 v
LED_GREEN_0603
D10
12_0V
VCC_CORE, +1.2 V, 1.35 A
1_5V, +1.5 V, 1.1 A
SW
EN
3_3V, +3.3 V, 1.35 A
3
VOUT1
+2.5v
1.1 A
C30
10uF,25V-1206SMT
6.3V
0805
+1.2 v
500 mA
1.2V
VCC_CORE
SERDES 1_2V, +1.2 V, 1A
FB4
BLM41PG600SN1
2_5V, +2.5V, 1.1 A
LDO
EN
C11
VCC_CORE
100NF-0402SMT
SW
EN
SW
Power Supply Block Diagram
100NF-0402SMT
V13
U12
U11
V10
C2
10NF-0402SMT
1NF-0402SMT
100NF-0402SMT
10NF-0402SMT
1UF-16V-0805SMT
10NF-0402SMT
C1
100NF-0402SMT
22UF-16V-TANTBSMT
22UF-16V-TANTBSMT
4
1UF-16V-0805SMT
100NF-0402SMT
22UF-16V-TANTBSMT
14
13
VIN1
VIN1_13
12
11
VIN2
VIN2_11
NC
GND
GND_PAD
J11
J9
P11
P12
J14
J13
M14
M9
P9
L9
P14
P10
J12
J10
L14
P13
1UF-16V-0805SMT
D
GND
VCC
GND
VCC
VCC
GND
VCC
GND
VCC
GND
GND
VCC
GND
VCC
GND
VCC
GND
VCC
VCC
GND
GND
VCC
GND
VCC
VCC
GND
VCC
GND
GND
VCC
VCC
GND
GND
GND
GND
VCCA
GND
VCCA
GND
VCCA
VCCA
GND
GND
GND
VCCAUX
GND
VCCAUX
VCCAUX
GND
GND
VCCAUX
GND
VCCAUX
GND
VCCAUX
GND
VCCAUX
GND
VCCAUX
GND
VCCPLL_L
GND
GND
VCCPLL_L
GND
VCCPLL_R
GND
VCCPLL_R
GND
XRES
GND
GND
GND RESERVE-AB2
GND RESERVE-AA3
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
2
1
2
100NF-0402SMT
G
2
1
2
5
17
C45
330pF-0402SMT
1NF-0402SMT
5
G
3
2
G
3
2
1
2
G
3
2
C46
10pF-0402SMT
C60
10pF-0402SMT
2
1
C59
330pF-0402SMT
1%
22UF-16V-TANTBSMT
GND1
GND2
GND3
GND4
R11
34K-0402SMT
R18
63_4K-0402SMT
21
SHDN
3
4
5
6
21
SHDN
9
VIN1
GND5
25
GND1
GND2
GND3
GND4
3
4
5
6
R10
51K-0402SMT
R19
30_1K-0402SMT
100NF-0402SMT
10
VIN2
GND6
GND7
GND8
GND9
13
14
15
16
10
VIN2
2
1
22UF-16V-TANTBSMT
1UF-16V-0805SMT
Date:
Size
C
Title
R20
20K-0402SMT
1%
R13
11_5K-0402SMT
1%
R8
35_7K-0402SMT
D4
DFLS220L
3.3V
C39
220NF-0402SMT
16V
L2
4.7uH-SPD62R-472M
1
3_3V
C50
22uF,6.3V-0805SMT
RLP-133
C42
22uF,6.3V-0805SMT
RLP-133
1.2v/ms
+3.3 v
1.35 A
3_3V
1_5V
1.1 A
C64
22uF,6.3V-0805SMT
RLP-133
C58
22uF,6.3V-0805SMT
RLP-133
1.2v/ms
1
Wednesday, February 09, 2011
Sheet
ECP3- VERSA Eval Board
Project
Power
2
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
Vout = 0.8*(R16/R17+1) = 1.51 v
100pF-0402SMT
R17
16_9K-0402SMT
1%
C246
15K-0402SMT
R16 1%
D8
DFLS220L
C53
220NF-0402SMT
16V
L4
4.7uH-SPD62R-472M
DDR3
1.5V Power +1.5v
Vout = 0.8*(R8/R13+1) = 3.28 v
C57 1000pF-0402SMT
D6
1N4448W
R12
51K-0402SMT
1UF-16V-0805SMT
U1A
G
C62
330pF-0402SMT
9
VIN1
GND5
25
G
2
1
C47
10pF-0402SMT
C61
10pF-0402SMT
1
2
10NF-0402SMT
GND6
GND7
GND8
GND9
C48
330pF-0402SMT
SERDES Power
1
2
17
13
14
15
16
N11
K13
B9
G12
V2
K8
M16
Y4
N12
AA7
U13
AA10
AA15
D3
M13
AB1
AA13
T10
U9
L12
AA18
K12
R10
K2
Y7
F2
U10
E14
N10
H8
AB22
W16
R5
M12
H18
AA16
V14
Y16
AA12
C11
E21
P2
T12
AA9
V15
M7
W20
M11
H10
L7
AB7
B5
B13
AA8
W7
V16
J5
A22
L16
H13
L20
K15
J21
U21
N8
U6
P16
V8
AA14
R15
A1
B17
R8
T11
F17
L13
F6
H15
V9
L10
M3
V7
AA11
P18
K11
T13
C19
K10
G11
N21
AB16
N13
U14
U17
E8
M10
L11
R13
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 12. Power
A
B
C
8
8
7
9
9
100NF-0402SMT
J2
C82
5
C83
3_3V
SW2
FPGA_CSSPI0N_DI
SPI0_Q
PROGRAMN
SW1
3_3V
C77
100NF-0402SMT
FLASH_DIS
PROGRAMN
& GSRN
Pushbuttons
FPGA GSRN
L5
1UH-1206SMT
4_7K-0402SMT
R51
7
6
R66
10K-0402SMT
R34
4_7K-0402SMT
CS
CLK
DI
DO
93LC56-SO8
VCC
NU
ORG
VSS
3
1
3_3V
OUT1
OUT2
MAX6817
IN2
IN1
U7
1
2
3
4
5
6
7
8
U8
M25P64-FLASH
HOLD# CK
VCC
D
DU1
DU8
DU2
DU7
DU3
DU6
DU4
DU5
S#
VSS
Q
W#
R39 27R-0603SMT
USB1_CS
USB1_SK
USB1_D
USB1_Q
1
12 MHz
2
C80
12PF-0603SMT
DI
Y1
ATS120SM-1 HC-49/US-SM
DI
1
2
3
4
16
15
14
13
12
11
10
9
6
GSRN
PROGRAMN
NW
FPGA_MCLK
FPGA_SISPI
4
3_3V
4
+
R48
C76
DI
LFE3-35E-FN484CES
VCCIO8
VCCIO8
H16
G16
13
3
2
63
62
61
6
14
7
8
49
50
FPGA_CSSPI0N_DI
FPGA_CS1N
FPGA_CSN
GSRN
FPGA_MCLK
PROGRAMN
TXD_UART
RXD_UART
SPI0_Q
FPGA_SISPI
DONE
INITN
FPGA_WRITEN
SPIFASTN
FTVCC1_8V
FT2232H
CLK_RESETn
156MHz_EN
SCL
[9]
SDA
[9]
PCIE_PERSTN
BCBUS0
BCBUS1
BCBUS2
BCBUS3
BCBUS4
BCBUS5
BCBUS6
BCBUS7
BDBUS0
BDBUS1
BDBUS2
BDBUS3
BDBUS4
BDBUS5
BDBUS6
BDBUS7
ACBUS0
ACBUS1
ACBUS2
ACBUS3
ACBUS4
ACBUS5
ACBUS6
ACBUS7
ADBUS0
ADBUS1
ADBUS2
ADBUS3
ADBUS4
ADBUS5
ADBUS6
ADBUS7
3_3V
C85
[9]
[9]
[4]
16
17
18
19
21
22
23
24
TP5
36
60
48
52
53
54
55
57
58
59
38
39
40
41
43
44
45
46
26
27
28
29
30
32
33
34
C69
100NF-0402SMT
3_3V
C70
R67
R62
OPEN-0402SMT
R68
R71
R69
10K-0402SMT
10K-0402SMT
10K-0402SMT
3_3V
FPGA_TMS
R54
10K-0402SMT
FPGA_TCK
10K-0402SMT
FPGA_CCLK
TXD_UART
RXD_UART
UART_ACT
R36 0R-0603SMT
R32 0R-0603SMT
R33 0R-0603SMT
R38 0R-0603SMT
JTAG_ACT
C68
100NF-0402SMT
FPGA_TDI
C67
PWREN#
C84
R52
0R-0402SMT
3
3_3V
3_3V
3_3V
VCCJ
TCK
TDI
TDO
TMS
U1I
R57
R58
R59
4_7K-0603SMT
3_3V
2
TCK
TMS
NC
VCC
7
1
3_3V
D16
3_3V
INITN
R65
10K-0603SMT
DONE
1
Date:
Size
C
Title
DONE
TMS
GND
TCK
DONE
INITn
680R-0603SMT
R55
1
3_3V
GSRN
D18
LED_RED_0603
+3.3V
TDO
TDI
PROGRAMn
Local JTAG
header (ispVM)
Friday, March 18, 2011
1
Sheet
ECP3 VERSA Eval Board
Project
Programming
3_3V
PROGRAMN
D19
LED_RED_0603
680R-0603SMT
R56
3
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
CONFIG
Status LEDs
DONE indicator will light when
configuration is successfully
completed
INITN
LED_RED_0603
R60
D17
680R-0603SMT
R
INITN indicator will light
if an error occurs during
configuration programming
HEADER 10
INITN
GND
ispEN_N
TDI
TDO
R30
LED_GREEN_0603
DONE
J3
2
3
4
5
6
8
9
10
D15
3_3V
Q4
2N2222/SOT23
D20
R49
1K-0603SMT
R45
R46
R47
4_7K-0603SMT
4_7K-0603SMT
4_7K-0603SMT
LFE3-35E-FN484CES
3_3V
H7
G7
G6
C3
C4
100NF-0402SMT
C73
3_3V
220R-0603SMT
G
100NF-0402SMT
SUSPEND#
FTDI High-Speed USB
TEST
OSCO
OSCI
EECS
EECLK
EEDATA
REF
RESET#
DM
DP
VREGOUT
VREGIN
U5
FT2232HL
FPGA_CCLK
R44
12K-0603SMT
R40
4_7K-0402SMT
F20
E20
E19
B21
F21
D20
J16
H17
C22
D22
G17
G18
G19
G20
H19
H20
C21
D21
F19
F18
A21
B22
C20
C18
B19
E18
E17
A20
B20
D18
D19
2_2K-0603SMT
CCLK
CFG0
CFG1
CFG2
DONE
INITN
PR11A/WRITEN
PR11B/D0/SPIFASTN
PR12A/D1
PR12B/D2
PR14A/D3/SI
PR14B/D4/SO
PR15A/D5
PR15B/D6/SPID1
PR17A/D7/SPID0
PR17B/BUSY/SISPI
PR6A
PR6B/DI/CSSPI0N/CSSPIN
PR8A/CS1N/HOLDN/CONT2N
PR8B/CSN/SN/CONT1N
PR9A/DOUT/CSON/CSSPI1N
PR9B/MCLK
PROGRAMN
PT68A
PT68B
PT70A
PT70B
PT71A
PT71B
PT73A
PT73B
U1H
R50
1M-0603SMT
DI
C75
USB_N_i
USB_P_i
C74
3_3UF-10V-SMT
3_3V
C72
100NF-0402SMT
C71
4_7UF-10V-SMT
2
FB6
MPZ1608Y600B +
DI
1
33pF-0402SMT-DNI
FTVCC1_8V
C66
100NF-0402SMT
C65
4_7UF-10V-SMT
2
FB5
MPZ1608Y600B +
DI
1
R31
LED_GREEN_0603
3_3V
R35 27R-0603SMT
18pF = 12pF + Ground Plane ( 6pF )
DI
USB_N
USB_P
R42
R41
R43
10K-0402SMT 10K-0402SMT 10K-0402SMT
C79
12PF-0603SMT
8
7
6
5
U6
SPI FLASH
R53
6
1
2
3
4
5
4_7K-0402SMT
1
2
3
4
5
C81
USB Download
10NF-0402SMT
5
VCC
2
GND
100NF-0402SMT
R37
10K-0603SMT
R64
10K-0402SMT
10
33pF-0402SMT-DNI
12
37
64
VCORE
VCORE
VCORE
20
31
42
56
D
R63
10K-0402SMT
100NF-0603SMT
220R-0603SMT
G
UART_ACT
100NF-0402SMT
VCCIO
VCCIO
VCCIO
VCCIO
4
9
VPHY
VPLL
AGND
USB_MINI_AB
R70
10K-0402SMT
SPIFASTN
2
FPGA_CSN
3
FPGA_WRITEN
4
FPGA_CS1N
C78
JTAG_ACT
R61
LED_GREEN_0603
GND
GND
GND
GND
GND
GND
GND
GND
100NF-0603SMT
Y
1
5
11
15
25
35
47
51
10NF-0402SMT
220R-0603SMT
G
3
2
Y
GSRN
18
PROGRAMN
5
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 13. Programming
PROGRAMN
DONE
INITN
FPGA_TDO
A
B
2
3
4
5
J6
SMA
PCSA_HDOUTP3
2
3
4
5
SMA
1
J8
1
SMA
1
J7
PCSA_HDINP3
SMA
1
J5
PCSA_HDOUTN3
PCSA_HDINN3
C93
C92
C91
C90
C89
C88
PCSA_VCCIB
PCSA_VCCOB
100NF-0402SMT
4
[9]
[9]
PRSNT1#
PRSNT3#
5
4
All Nets to SMAs are 100-ohm differential pairs.
The P and N traces shall be <20mil matched in length
2
3
4
5
2
3
4
5
PCSA_REFCLKP
PCSA_REFCLKN
PCSA_VCCIB
PCSA_HDOUTP3
PCSA_HDOUTN3
PCSA_REFCLKP
PCSA_REFCLKN
PCSA_HDINP3
PCSA_HDINN3
PCSA_HDOUTP0
PCSA_HDOUTN0
x1_PETp0
x1_PETn0
10NF-0402SMT
PCSA_VCCOB
LFE3-35E-FN484CES
Y15
Y14
Y12
Y13
Y11
Y10
Y8
Y9
AB15
AB14
AB12
AB13
AB11
AB10
AB8
AB9
V12
V11
W15
W12
W11
W8
W14
W13
W10
W9
1NF-0402SMT
C
PCSA_HDINP0
PCSA_HDINN0
PCSA_HDINP1
PCSA_HDINN1
PCSA_HDINP2
PCSA_HDINN2
PCSA_HDINP3
PCSA_HDINN3
PCSA_HDOUTP0
PCSA_HDOUTN0
PCSA_HDOUTP1
PCSA_HDOUTN1
PCSA_HDOUTP2
PCSA_HDOUTN2
PCSA_HDOUTP3
PCSA_HDOUTN3
PCSA_REFCLKP
PCSA_REFCLKN
PCSA_VCCIB0
PCSA_VCCIB1
PCSA_VCCIB2
PCSA_VCCIB3
PCSA_VCCOB0
PCSA_VCCOB1
PCSA_VCCOB2
PCSA_VCCOB3
100NF-0402SMT
D
U1J
10NF-0402SMT
19
1NF-0402SMT
J4
1
3
5
[3]
HEADER 3X2
2
4
6
PCIE_PERSTN
3
3
3_3V
PRSNT
[9]
[9]
R72
4_7K-0603SMT
5
R178
[9]
PCIE_CLKP
PCIE_CLKN
OPEN-0603SMT
x1_PERp0
x1_PERn0
PCIE_CLKP
PCIE_CLKN
PCIE_3V3
12_0VIN
C86
PRSNT1#
+12V
+12V
GND
JTAG2
JTAG3
JTAG4
JTAG5
+3.3V
+3.3V
PERST#
GND
REFCLK+
REFCLKGND
PERp0
PERn0
GND
CN1
+12V
+12V
RSVD_B3
GND
SMCLK
SMDAT
GND
+3.3V
JTAG1
3.3Vaux
WAKE#
RSVD_B12
GND
PETp0
PETn0
GND
PRSNT3#
GND
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
x1_PERn0
x1_PERp0
PCI Express x1 Edge Finger Conn.
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
C87
PRSNT3#
x1_PETp0
x1_PETn0
PCIE_3V3 1
X1 PCIe Board Fingers
PRSNT1#
100NFX5R-0402SMT
100NFX5R-0402SMT
1
TP6
Testpoint
2
Date:
Size
B
Title
Wednesday, February 09, 2011
1
Sheet
ECP3 VERSA Eval Board
Project
SERDES
4
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
All Nets are 85-ohm differential pairs.
The P and N traces shall be <20mil matched in length
B side = Primary Component Side(TOP)
A side = Secondary Component Side(BOTTOM)
PCSA_HDOUTP0
PCSA_HDOUTN0
2
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 14. SERDES
A
B
C
5
C109
C108
3_3V
C107
LFE3-35E-FN484CES
VTT6
VCCIO6
VCCIO6
10NF-0402SMT
100NF-0603SMT
D
100NF-0603SMT
M6
P8
N7
V6
U7
Y6
AA6
U8
T8
R9
T9
AB3
AB4
W4
Y5
AA4
AA5
W5
W6
AB5
AB6
L3
L2
L4
M4
M2
M1
M5
N6
N2
N1
N4
P4
N3
P3
N5
P6
P1
R1
P5
R6
R3
R2
U1
U2
T2
T1
T3
U3
P7
V1
W1
R7
T7
V3
W3
R4
T5
W2
Y1
T4
U4
AA1
Y2
T6
U5
Y3
AA2
V4
V5
TP7
3_3V
PHY1_MDC
PHY1_COMAn
0
R97
PHY1_TXD1
0
R82
1_TX_EN
PHY1_TXD2
0
R81
[8]
C116
C125
C124
2
1
FB13
Z-600 ohm / 74279265
C101
C94
C103
C106
10uF/6V3/X7R-0805SMT
C105
C104
C102
PHY1_VDDO
1
2
PHY1_AVDDR
PHY1_DVDD
C123
10uF/6V3/X7R-0805SMT
C117
10uF/6V3/X7R-0805SMT
TXD[3]
TXD[4]
TXD[5]
TXD[6]
TXD[7]
GTX_CLK
DVDD
COMA_n
CLK125
LED[0]
LED[1]
VDDO
LED[2]
RESET_n
DIS_REG12
DVDD
AVDDR
AVDDR
Q5
1
R106
4_75K-0603SMT
3
C126
100NF-0603SMT
BCP69-16
3_3V
88E1119R_72QFN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
C118
100NF-0603SMT
GPHY
1.8V Power
PHY1_COMAn
C110
R101
4_7K-0402SMT TP8
PHY1_TXD3
PHY1_TXD4
PHY1_TXD5
PHY1_TXD6
PHY1_TXD7
PHY1_GTXCLK
PHY1_DVDD
PHY1_COMAn
PHY1_CLK125
PHY1_LED0
PHY1_LED1
PHY1_VDDO
PHY1_LED2
PHY1_RSTN
U9
TX and RX traces
are all matched length < 2"
1_RSTN R104
R180
1_8K-0402SMT
PHY1_AVDDR
4
PHY1_AVDDX
PHY1_AVDDC
PHY1_VDDO
Place termination
resistors TX_D0-7,
TX_ER, TX_EN,
GTX_CLK as close to
FPGA as possible
using 50 ohm
impedence traces.
1
2
FB10
Z-600 ohm / 74279265
2
1
FB12
Z-600 ohm / 74279265
2
1
FB11
Z-600 ohm / 74279265
2
1
2
FB9
Z-600 ohm / 74279265
HEADER 2
J10
1
FB8
Z-600 ohm / 74279265
PHY1_VCC_CT
PHY1_AVDD
C114
C115
C113
PHY1_TX_EN
PHY1_TXD0
PHY1_CLK125
PHY1_TXD3
0
PHY1_TXD4
0
0
PHY1_TXD5
0
R96
PHY1_TXD6
0
0
1_TXD0
PHY1_TXD7
0
1_125MHz R95
1_RXD4
1_TXD2
1_RXD5
1_TXD1
PHY1_GTXCLK
SEG[0:14]
0
1_RSTN
PHY1_MDIO
1_RXC
1_RX_ER
1_GTXCLK R75
1_RX_DV
1_RXD0
1_RXD2
1_TXD7
R76
1_RXD1
1_TXD6
R77
1_CRS
1_TXD5
R78
1_RXD7
1_TXD4
R79
1_RXD3
1_TXD3
R80
1_COL
1_RXD6
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
SEG13
SEG14
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
100NF-0603SMT
3
PHY1_AVDDX
C95
C127
ETH1_MD3_N
ETH1_MD3_P
PHY1_AVDD
4_7UF-16V-0805SMT
2 PHY1_VDDOR
FB7
Z-600 ohm / 74279265
C128
C119
100NF-0603SMT
1
CRS
COL
MDC
DVDD
VDDO
MDIO
TDO
TDI
TCK
TMS
TRST_n
DVDD
XTAL_OUT
XTAL_IN
AVDDC
HSDACP
HSDACN
AVDDC
PHY1_DVDD
C129
C130
C131
C122
R105
4_99K-0402SMT
RLP-100
PHY1_AVDD
C120
C121
ETH1_MD2_N
ETH1_MD2_P
ETH1_MD1_N
ETH1_MD1_P
PHY1_AVDD
100NF-0603SMT
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
PHY1_AVDDC
PHY1_DVDD
PHY1_XTAL_OUT
PHY1_XTAL_IN
PHY1_AVDDC
2
C241
ETH1_MD0_P
ETH1_MD3_N
ETH1_MD3_P
ETH1_MD2_N
ETH1_MD2_P
ETH1_MD1_N
ETH1_MD1_P
ETH1_MD0_N
C242
PHY1_VDDO
1_CRS
1_COL
R102
1K-0402SMT
R103
4_7K-0402SMT
0R-0402SMT
PHY1_CRS R98
PHY1_COL R99
PHY1_MDC
PHY1_DVDD
PHY1_VDDO
R100
PHY1_MDIO
4_7K-0402SMT
Place termination
resistors RX_D0-7,
RX_ER, RX_DV, RX_CLK,
TX_CLK, CRS, COL, RSTN
as close to the
G-PHY as possible
using 50 ohm impedence
traces.
2
PHY1_VCC_CT
1
10NF-0402SMT
C97
C100
10NF-0402SMT
C99
10NF-0402SMT
C98
10NF-0402SMT
Place caps close to RJ45 jack
28
27
29
23
21
22
24
26
25
31
32
30
2_SHLD1
2_SHLD2
7
8
4
5
3
6
1
2
Date:
Size
C
Title
Y2
R73
100R-0402SMT
PHY1_LED0
PHY1_LED1
27pF-0603SMT
1
Thursday, February 24, 2011
Sheet
5
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
C112
27pF-0603SMT
ECP3-VERSA Eval Board
Project
R74
100R-0402SMT
PHY1_XTAL_OUT
C111
25MHZ CRYSTAL
36
35
34
33
37
38
MH1 and MH2
are 0.100"
diameter plated
through holes
10/100/1000-T PHY#1/RJ45
PHY1_XTAL_IN
0826-1X1T-43-F
Gr/Yel 2_LED2+
2_LED22_LED1+
Yel
2_LED1-
2_MDID+
2_MDDCT
2_MDID-
2_MDIC+
2_MDCCT
2_MDIC-
2_MDIB+
2_MDIBCT
2_MDIB-
2_MDIA+
2_MDACT
2_MDIA-
J9B
Ethernet RJ45 Connector
C96
10NF-0402SMT
2
1
3_3V
100NF-0603SMT
PB10A
PB10B
PB11A
PB11B
PB13A
PB13B
PB16A
PB16B
PB2A
PB2B
PB4A
PB4B
PB5A
PB5B
PB7A
PB7B
PB8A
PB8B
PL36A/LDQ41
PL36B/LDQ41
PL38A/PCLKT6_0/LDQ41
PL38B/PCLKC6_0/LDQ41
PL39A/LDQ41
PL39B/LDQ41
PL41A/LDQS41_P
PL41B/LDQS41_N
PL42A/LDQ41
PL42B/LDQ41
PL44A/VREF1_6/LDQ41
PL44B/VREF2_6/LDQ41
PL45A/LDQ50
PL45B/LDQ50
PL47A/LDQ50
PL47B/LDQ50
PL48A/LDQ50
PL48B/LDQ50
PL50A/LDQS50_P
PL50B/LDQS50_N
PL51A/LDQ50
PL51B/LDQ50
PL53A/LDQ50
PL53B/LDQ50
PL53E_A/LLM1_GPLLT_FB_A
PL53E_B/LLM1_GPLLT_FB_B
PL53E_C/LLM1_GPLLT_IN_A
PL53E_D/LLM1_GPLLT_IN_B
PL56B/LDQ59
PL57A/LDQ59
PL57B/LDQ59
PL59A/LDQS59_P
PL59B/LDQS59_N
PL60A/LDQ59
PL60B/LDQ59
PL62A/LDQ59
PL62B/LDQ59
PL63A/LDQ68
PL63B/LDQ68
PL65A/LDQ68
PL65B/LDQ68
PL66A/LDQ68
PL66B/LDQ68
PL68A/LDQS68_P
PL68B/LDQS68_N
PL69A/LDQ68
PL69B/LDQ68
PL71A/LDQ68
PL71B/LDQ68
100NF-0603SMT
100NF-0603SMT
ETH1_MD0_N
ETH1_MD0_P
100NF-0603SMT
4
100NF-0402SMT
1
2
1
2
RJ45
U1F
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
3
4
2
1_TXC
[10]
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
TXD[2]
TXD[1]
TXD[0]
TX_EN
VDDOR
TX_CLK
RXD[7]
RXD[6]
RXD[5]
RXD[4]
RXD[3]
RXD[2]
RXD[1]
RXD[0]
VDDOR
RX_CLK
RX_DV
RX_ER
AVDDX
CTRL18
NC
MDIN[3]
MDIP[3]
AVDD
AVDD
MDIN[2]
MDIP[2]
MDIN[1]
MDIP[1]
AVDD
AVDD
AVDD
MDIN[0]
MDIP[0]
TSTPT
RSET
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
20
EPAD
20R-0402SMT
PHY1_RX_ER
PHY1_RX_DV
PHY1_RXC
PHY1_VDDOR
PHY1_RXD0
PHY1_RXD1
PHY1_RXD2
PHY1_RXD3
PHY1_RXD4
PHY1_RXD5
PHY1_RXD6
PHY1_RXD7
PHY1_TXC
PHY1_VDDOR
PHY1_TX_EN
PHY1_TXD0
PHY1_TXD1
PHY1_TXD2
73
0
0
100NF-0603SMT
20R-0402SMT
0
0
0
0
0
0
0
0
100NF-0603SMT
R91
R90
R89
R88
R87
R86
R85
R84
R83
100NF-0603SMT
1_RXD0
1_RXD1
1_RXD2
1_RXD3
1_RXD4
1_RXD5
1_RXD6
1_RXD7
1_TXC
100NF-0603SMT
1_RX_ER R94
1_RX_DV R93
1_RXC R92
100NF-0402SMT
PHY1_LED2
5
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 15. 10/100/1000-T PHY #1/RJ45
A
B
5
C147
3_3V
C146
C145
LFE3-35E-FN484CES
10NF-0402SMT
100NF-0603SMT
VTT3
VCCIO3
VCCIO3
100NF-0603SMT
C
PB61A
PB61B
PB62A
PB62B
PB64A
PB64B
PB65A
PB65B
PB67A
PB67B
PB68A
PB68B
PB70A
PB70B
PB71A
PB71B
PB73A
PB73B
PR36A/RDQ41
PR36B/RDQ41
PR38A/PCLKT3_0/RDQ41
PR38B/PCLKC3_0/RDQ41
PR39A/RDQ41
PR39B/RDQ41
PR41A/RDQS41_P
PR41B/RDQS41_N
PR42A/RDQ41
PR42B/RDQ41
PR44A/VREF1_3/RDQ41
PR44B/VREF2_3/RDQ41
PR45A/RDQ50
PR45B/RDQ50
PR47A/RDQ50
PR47B/RDQ50
PR48A/RDQ50
PR48B/RDQ50
PR50A/RDQS50_P
PR50B/RDQS50_N
PR51A/RDQ50
PR51B/RDQ50
PR53A/RDQ50
PR53B/RDQ50
PR53E_A/RLM1_GPLLT_FB_A/RDQ50
PR53E_B/RLM1_GPLLT_FB_B/RDQ50
PR53E_C/RLM1_GPLLT_IN_A/RDQ50
PR53E_D/RLM1_GPLLT_IN_B/RDQ50
PR63A/RDQ68
PR63B/RDQ68
PR65A/RDQ68
PR65B/RDQ68
PR66A/RDQ68
PR66B/RDQ68
PR68A/RDQS68_P
PR68B/RDQS68_N
PR69A/RDQ68
PR69B/RDQ68
PR71A/RDQ68
PR71B/RDQ68
U1E
M17
P15
N16
U16
U15
AB17
AA17
T14
R14
AB18
AB19
W18
W17
Y17
Y18
V18
V17
AA19
Y19
T15
T16
P22
R21
N19
M19
R22
T22
N18
P19
T20
R20
P20
N20
U22
V22
R16
P17
Y22
W22
T21
U20
Y21
W21
R19
R18
V21
V20
R17
T17
AA22
AB21
T19
T18
U19
U18
AA21
Y20
W19
V19
AA20
AB20
R110
0
0
TP9
3_3V
LED0
LED1
LED2
LED3
LED4
LED5
LED6
LED7
2_TXD5
R111 0
2_TX_EN R112 0
2_TXD1
R113 0
2_TXD2
R114 0
2_TXD3
R115 0
2_TXD0
R116 0
2_TXD4
R117 0
2_TXD7
R118 0
2_RXD7
2_RXD6
2_RXD2
2_RXD5
2_RXD3
2_RX_ER
2_125MHz R131 0
2_RXD4
2_TXD6
2_COL
2_CRS
2_RSTN
2_RXC
2_GTXCLK R109
PHY2_COMAn
PHY2_MDC
PHY2_MDIO
2_RX_DV
2_RXD0
2_RXD1
100NF-0603SMT
C157
C151
C162
C152
C163
C158
4
PHY2_AVDDR
1
1
FB20
Z-600 ohm / 74279265
2
FB19
Z-600 ohm / 74279265
2
2
1
FB18
Z-600 ohm / 74279265
PHY2_AVDD
PHY2_AVDDX
PHY2_AVDDC
PHY2_VDDO
C140
C142
C144
C141
C143
C133
C139
10uF/6V3/X7R-0805SMT
1
2
PHY2_COMAn
C148
C161
10uF/6V3/X7R-0805SMT
TXD[3]
TXD[4]
TXD[5]
TXD[6]
TXD[7]
GTX_CLK
DVDD
COMA_n
CLK125
LED[0]
LED[1]
VDDO
LED[2]
RESET_n
DIS_REG12
DVDD
AVDDR
AVDDR
U10
3_3V
Q6
3
C164
100NF-0603SMT
BCP69-16
1
R140
4_75K-0603SMT
88E1119R_72QFN
C160
100NF-0603SMT
C159
10uF/6V3/X7R-0805SMT
GPHY
1.8V Power
HEADER 2
J12
R135
4_7K-0402SMT TP10
R181
2_RSTN R138
1_8K-0402SMT
PHY2_VDDO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PHY2_DVDD 16
17
18
PHY2_AVDDR
PHY2_TXD3
PHY2_TXD4
PHY2_TXD5
PHY2_TXD6
PHY2_TXD7
PHY2_GTXCLK
PHY2_DVDD
PHY2_COMAn
PHY2_CLK125
PHY2_LED0
PHY2_LED1
PHY2_VDDO
PHY2_LED2
PHY2_RSTN
TX and RX traces are
all matched length and < 2"
Place termination
resistors TX_D0-7,
TX_ER, TX_EN,
GTX_CLK as close to
FPGA as possible
using 50 ohm
impedence traces.
1
2
FB17
Z-600 ohm / 74279265
[8]
PHY2_VCC_CT
2
FB16
Z-600 ohm / 74279265
1
2
1
FB15
Z-600 ohm / 74279265
LED[0:7]
PHY2_CLK125
PHY2_TXD5
PHY2_TX_EN
PHY2_TXD1
PHY2_TXD2
PHY2_TXD3
PHY2_TXD0
PHY2_TXD4
PHY2_TXD7
PHY2_TXD6
PHY2_GTXCLK
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
10uF/6V3/X7R-0805SMT
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
C165
C153
CRS
COL
MDC
DVDD
VDDO
MDIO
TDO
TDI
TCK
TMS
TRST_n
DVDD
XTAL_OUT
XTAL_IN
AVDDC
HSDACP
HSDACN
AVDDC
C166
PHY2_AVDD
C154
C155
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
PHY2_DVDD
C167
C168
C156
R139
4_99K-0402SMT
RLP-100
ETH2_MD3_N
ETH2_MD3_P
ETH2_MD2_N
ETH2_MD2_P
ETH2_MD1_N
ETH2_MD1_P
ETH2_MD0_N
ETH2_MD0_P
C169
2
PHY2_AVDDC
PHY2_DVDD
PHY2_XTAL_OUT
PHY2_XTAL_IN
PHY2_AVDDC
C243
C244
PHY2_VDDO
2_CRS
2_COL
R136
1K-0402SMT
R137
4_7K-0402SMT
33R-0402SMT
PHY2_CRS R132
PHY2_COL R133
PHY2_MDC
PHY2_DVDD
PHY2_VDDO
R134
PHY2_MDIO
4_7K-0402SMT
Place termination
resistors RX_D0-7,
RX_ER, RX_DV, RX_CLK,
TX_CLK, CRS, COL
as close to the
G-PHY as possible
using 50 ohm impedence
traces.
2
PHY2_VCC_CT
10NF-0402SMT
C135
C138
10NF-0402SMT
C137
10NF-0402SMT
C136
10NF-0402SMT
8
7
9
3
1
2
4
6
5
11
12
10
1_SHLD1
1_SHLD2
7
8
4
5
3
6
1
2
Date:
Size
C
Title
Y3
R107
100R-0402SMT
PHY2_LED0
PHY2_LED1
27pF-0603SMT
1
Thursday, February 24, 2011
Sheet
6
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
C150
27pF-0603SMT
ECP3-VERSA Eval Board
Project
R108
100R-0402SMT
PHY2_XTAL_OUT
C149
25MHZ CRYSTAL
16
15
14
13
19
20
MH1 and MH2
are 0.100"
diameter plated
through holes
10/100/1000-T PHY#2/RJ45
PHY2_XTAL_IN
0826-1X1T-43-F
Gr/Yel 1_LED2+
1_LED21_LED1+
Yel
1_LED1-
1_MDID+
1_MDDCT
1_MDID-
1_MDIC+
1_MDCCT
1_MDIC-
1_MDIB+
1_MDIBCT
1_MDIB-
1_MDIA+
1_MDACT
1_MDIA-
J9A
Ethernet RJ45 Connector
C134
10NF-0402SMT
2
1
1
Place caps close to RJ45 jack
RJ45
C132
100NF-0603SMT
1
2
1
2
1
2 PHY2_VDDOR
FB14
Z-600 ohm / 74279265
PHY2_AVDDX
PHY2_LED2
3_3V
ETH2_MD3_N
ETH2_MD3_P
PHY2_AVDD
3
100NF-0603SMT
D
100NF-0603SMT 100NF-0603SMT
ETH2_MD2_N
ETH2_MD2_P
ETH2_MD1_N
ETH2_MD1_P
PHY2_AVDD
4_7UF-16V-0805SMT
ETH2_MD0_N
ETH2_MD0_P
100NF-0603SMT
4
3
4
2
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
TXD[2]
TXD[1]
TXD[0]
TX_EN
VDDOR
TX_CLK
RXD[7]
RXD[6]
RXD[5]
RXD[4]
RXD[3]
RXD[2]
RXD[1]
RXD[0]
VDDOR
RX_CLK
RX_DV
RX_ER
AVDDX
CTRL18
NC
MDIN[3]
MDIP[3]
AVDD
AVDD
MDIN[2]
MDIP[2]
MDIN[1]
MDIP[1]
AVDD
AVDD
AVDD
MDIN[0]
MDIP[0]
TSTPT
RSET
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
100NF-0603SMT
EPAD
73
100NF-0603SMT
21
100NF-0603SMT
PHY2_RX_ER
PHY2_RX_DV
PHY2_RXC
PHY2_VDDOR
PHY2_RXD0
PHY2_RXD1
PHY2_RXD2
PHY2_RXD3
PHY2_RXD4
PHY2_RXD5
PHY2_RXD6
PHY2_RXD7
PHY2_TXC
PHY2_VDDOR
PHY2_TX_EN
PHY2_TXD0
PHY2_TXD1
PHY2_TXD2
100NF-0603SMT
[10]
100NF-0603SMT
R130
0
R129
0
R128
20R-0402SMT
R127
0
R126
0
R125
0
R124
0
R123
0
R122
0
R121
0
R120
0
R119
20R-0402SMT
100NF-0603SMT
2_TXC
2_RXD0
2_RXD1
2_RXD2
2_RXD3
2_RXD4
2_RXD5
2_RXD6
2_RXD7
2_TXC
100NF-0402SMT
2_RX_ER
2_RX_DV
2_RXC
100NF-0402SMT
5
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 16. 10/100/1000-T PHY #2/RJ45
A
B
C
R142
4_7K-0603SMT
C190
C196
10NF-0603SMT
C219
1_5V
5
1UF-16V-0805SMT
VDDQ
VREF
SD
C172
LFE3-35E-FN484CES
5
VTT7
VCCIO7
VCCIO7
C174
L6
J8
K7
E3
D4
E5
E4
B2
C2
F5
F4
D2
D1
G4
G5
E2
F3
H4
J4
B1
C1
H5
H6
G3
G2
E1
F1
G1
H1
J7
J6
H2
H3
J3
K3
J2
J1
K4
K5
K1
L1
L5
K6
8
3
LP2998-SO8
VTT
VSENSE
AVIN
PVIN
U12
DDR3_VS
TP11
1_5V
100MHz
100MHz_N
SWITCH1
SWITCH2
SWITCH3
SWITCH4
SWITCH5
SWITCH6
SWITCH7
SWITCH8
DDR3_K0
DDR3_K0#
DDR3_DM0
DDR3_RST#
DDR3_DQ0
DDR3_DQ1
DDR3_DQ5
DDR3_DQ4
DDR3_DQS0
DDR3_DQS0#
DDR3_DQ2
DDR3_DQ3
DDR3_DQ7
DDR3_DQ6
DDR3_DQ11
DDR3_DM1
DDR3_DQ10
DDR3_DQ12
DDR3_DQ13
DDR3_DQ14
DDR3_DQS1
DDR3_DQS1#
DDR3_DQ15
DDR3_DQ8
ECP3_VREF
DDR3_DQ9
C177 +
C179 +
100UF-D3POSCAP
C178
R141
0R-0603SMT
DDR3_VDD
1UF-16V-0805SMT
6
7
100NF-0603SMT
PL9A/LDQ14
PL9B/LDQ14
PL11A/LDQ14
PL11B/LDQ14
PL12A/LDQ14
PL12B/LDQ14
PL14A/LDQS14_P
PL14B/LDQS14_N
PL15A/LDQ14
PL15B/LDQ14
PL17A/LDQ14
PL17B/LDQ14
PL18A/LDQ23
PL18B/LDQ23
PL20A/LDQ23
PL20B/LDQ23
PL21A/LDQ23
PL21B/LDQ23
PL23A/LDQS23_P
PL23B/LDQS23_N
PL24A/LDQ23
PL24B/LDQ23
PL26A/VREF1_7/LDQ23
PL26B/VREF2_7/LDQ23
PL27A/LDQ32
PL27B/LDQ32
PL29A/LUM0_GDLLT_IN_A/LDQ32
PL29B/LUM0_GDLLT_IN_B/LDQ32
PL30A/LUM0_GDLLT_FB_A/LDQ32
PL30B/LUM0_GDLLT_FB_B/LDQ32
PL32A/LDQS32_P
PL32B/LDQS32_N
PL33A/LDQ32
PL33B/LDQ32
PL35A/PCLKT7_0/LDQ32
PL35B/PCLKC7_0/LDQ32
PL35E_A/LUM0_GPLLT_FB_A
PL35E_B/LUM0_GPLLT_FB_B
PL35E_C/LUM0_GPLLT_IN_A
PL35E_D/LUM0_GPLLT_IN_B
U1G
10NF-0603SMT
C191
C197
100NF-0603SMT
100NF-0603SMT
C192
C198
10NF-0603SMT
10NF-0603SMT
DDR3_VDDQ
1_5V
R143
R148
1
3_3V
DI
2
10NF-0603SMT
C225
DI
C226
DI
MPZ1608Y600B
FB23
R156
100R-0402SMT
100NF-0603SMT
100MHz
R146
0R-0603SMT
R145
0R-0603SMT
OPEN-0603SMT
R144
+ C180
BLM41PG600SN1
FB22
4
2
1
NC
DIS#
R157
10K-0402SMT
100MHz_N
OPEN-0603SMT
R149
ECP3_VREF
Place close to FPGA
OPEN-0603SMT
1_5V
1_5V
+ C176
BLM41PG600SN1
FB21
MEM_VREF
OPEN-0603SMT
1_5V
PP1
DDR3_VTT
1_5V
MEM_VREF
Q_N
Q
M8
H1
B1
B9
D1
D8
E2
E8
F9
G1
G9
A9
B3
E1
G8
J2
J8
M1
M9
P1
P9
T1
T9
A1
A8
C1
C9
D2
E9
F1
H2
H9
B2
D9
K2
K8
G7
N1
N9
R1
R9
VREFCA
VREFDQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSSQ
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDDQ
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
VDD
ddr3-96bga
100MHz
100MHz_N
5
VCCIO0
VCCIO0
H9
G10
3
NC_J1
NC_L1
NC_J9
NC_L9
NC_T3
NC_T7
NC_M7
1_5V
PCLKT0
PCLKC0
DDR3_BA1
DDR3_BA2
DDR3_CS0#
DDR3_BA0
DDR3_A2
DDR3_A8
DDR3_A3
DDR3_ODT0
DDR3_A9
DDR3_RAS#
DDR3_A0
DDR3_A1
DDR3_A4
DDR3_A5
DDR3_A10
DDR3_A11
3
ZQ
CAS#
CK
CK#
CKE
CS#
LDM
UDM
ODT
RAS#
RST#
WE#
BA0
BA1
BA2
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10/AP
A11
A12/BC#
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
LDQS
LDQS#
UDQS
UDQS#
DDR3_WE#
DDR3_A7
DDR3_A6
DDR3_CAS#
DDR3_A12
DDR3_CE0
ddr3-96bga
D6
D7
A3
A4
F7
G8
A5
A6
C8
C7
F9
E9
C9
C10
D9
D10
B7
A7
D8
E7
B8
A8
C5
B4
F10
E10
A9
B10
E11
D11
A10
A11
F11
F12
E6
D5
C6
B6
F8
G9
B3
A2
U11A
PT10A/TDQ7
PT10B/TDQ7
PT11A/TDQ16
PT11B/TDQ16
PT13A/TDQ16
PT13B/TDQ16
PT14A/TDQ16
PT14B/TDQ16
PT20A/TDQ25
PT20B/TDQ25
PT22A/TDQ25
PT22B/TDQ25
PT23A/TDQ25
PT23B/TDQ25
PT25A/TDQS25_P
PT25B/TDQS25_N
PT26A/TDQ25
PT26B/TDQ25
PT28A/TDQ25
PT28B/TDQ25
PT29A/TDQ34
PT29B/TDQ34
PT2A/TDQ7
PT2B/TDQ7
PT31A/TDQ34
PT31B/TDQ34
PT32A/TDQ34
PT32B/TDQ34
PT34A/TDQS34_P
PT34B/TDQS34_N
PT35A/TDQ34
PT35B/TDQ34
PT37A/PCLKT0_0/TDQ34
PT37B/PCLKC0_0/TDQ34
PT4A/VREF1_0/TDQ7
PT4B/VREF2_0/TDQ7
PT5A/TDQ7
PT5B/TDQ7
PT7A/TDQS7_P
PT7B/TDQS7_N
PT8A/TDQ7
PT8B/TDQ7
U1B
C205
LFE3-35E-FN484CES
10NF-0603SMT
4
X1
DSC-100_00MHz
C181
DDR3_VDDQ
C171
DDR3_VDD
U11B
DDR3_BA0
DDR3_BA1
DDR3_BA2
DDR3_CAS#
DDR3_K0
DDR3_K0#
DDR3_CE0
DDR3_CS0#
DDR3_DM0
DDR3_DM1
DDR3_ODT0
DDR3_RAS#
DDR3_RST#
DDR3_WE#
ZQ0
M2
N8
M3
K3
J7
K7
K9
L2
E7
D3
K1
J3
T2
L3
L8
PCLKT0
PCLKC0
SWITCH8
SWITCH7
SWITCH6
SWITCH5
SWITCH4
SWITCH3
SWITCH2
SWITCH1
[9]
[9]
DDR3_A0
DDR3_A1
DDR3_A2
DDR3_A3
DDR3_A4
DDR3_A5
DDR3_A6
DDR3_A7
DDR3_A8
DDR3_A9
DDR3_A10
DDR3_A11
DDR3_A12
N3
P7
P3
N2
P8
P2
R8
R2
T8
R3
L7
R7
N7
J1
L1
J9
L9
T3
T7
M7
DDR3_DQ0
DDR3_DQ1
DDR3_DQ2
DDR3_DQ3
DDR3_DQ4
DDR3_DQ5
DDR3_DQ6
DDR3_DQ7
DDR3_DQ8
DDR3_DQ9
DDR3_DQ10
DDR3_DQ11
DDR3_DQ12
DDR3_DQ13
DDR3_DQ14
DDR3_DQ15
DDR3_DQS0
DDR3_DQS0#
DDR3_DQS1
DDR3_DQS1#
E3
F7
F2
F8
H3
H8
G2
H7
D7
C3
C8
C2
A7
A2
B8
A3
F3
G3
C7
B7
DDR3_VTT
10NF-0603SMT
C185
A3
B3
C3
D3
E3
F3
G3
H3
J3
100NF-0603SMT
C183
CTS-RT1402B7
R1=50 Ohm
VTT
R1
R1
RP1
A1
B1
C1
D1
E1
F1
G1
H1
J1
A1
B1
C1
D1
E1
F1
G1
H1
J1
Memory
X1
U1 Pin
X1 needs to be matched length
for all traces
X2
Termination
at end of line
MEMORY DEVICE TERMINATION for ADDRESS/ CONTROL SIGNALS
1
DDR3_BA1
DDR3_A8
DDR3_A11
DDR3_A12
DDR3_RAS#
DDR3_BA2
DDR3_A2
DDR3_A5
DDR3_A3
SWITCH[1:8]
DDR3_VTT
R151
50R-0402SMT
RN1 741X083-100R
1
8
2
7
6
3
4
5
R152
50R-0402SMT
C207
10NF-0402SMT
DDR3_VTT
R153
50R-0402SMT
R154
50R-0402SMT
DDR3_VTT
[8]
Memory
RN2
741X083-100R
8
1
2
7
3
6
4
5
1
8
7
2
3
6
4
5
RN4
741X083-100R
DDR3_DQ6
DDR3_DQ10
DDR3_DQ0
DDR3_DQ7
DDR3_DQ12
DDR3_DQ15
DDR3_DQ1
DDR3_DQ2
2
Date:
Size
C
Title
R155
50R-0402SMT
1
Wednesday, February 09, 2011
Sheet
7
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
C206
10NF-0402SMT
ECP3 VERSA Eval Board
Project
DDR3 Memory
Termination as close as possible to U1
VTT
X2
U1 Pin
X1
FPGA DEVICE TERMINATION for DQ/DQS SIGNALS
DDR3_DQ5
DDR3_DQ13
DDR3_DQ4
DDR3_DQ14
DDR3_DQ3
DDR3_DQ11
DDR3_DQ9
DDR3_DQ8
RN3
741X083-100R
8
1
7
2
6
3
5
4
8
1
7
2
6
3
5
4
RN5
741X083-100R
Place DDR3_DQ/DQS Termination Resistors as close as possible to U1
DDR3_DQS0#
DDR3_DQS0
DDR3_DQS1
DDR3_DQS1#
DDR3_WE#
DDR3_ODT0
DDR3_CE0
DDR3_CS0#
R150
50R-0402SMT
C203
10NF-0402SMT
Place Address/Control Termination Resistors as close as possible to Memory Chip U7
DDR3_A6
DDR3_A4
DDR3_A1
DDR3_A10
DDR3_CAS#
DDR3_A0
DDR3_A9
DDR3_A7
DDR3_BA0
A3
B3
C3
D3
E3
F3
G3
H3
J3
ALL Memory controller
buses, clocks, and control
traces must be 50 Ohm
Transmission lines
2
100NF-0603SMT
4
C182
4
100NF-0603SMT
GND
C193
C199
C194
C200
100NF-0603SMT
100NF-0603SMT
1
2
1UF-16V-0805SMT
1UF-16V-0805SMT
47UF-16V-TANTBSMT
10NF-0603SMT
10NF-0603SMT
C195
C201
C217
10NF-0603SMT
C209
D
10NF-0603SMT
10NF-0603SMT
2
C220
C202
+
C218
100NF-0603SMT
C184
C210
DDR3_SD0
100NF-0603SMT
10NF-0402SMT
100NF-0603SMT
C211
DDR3_VREF
C221
10NF-0603SMT
C173
10NF-0603SMT
C212
1
C222
100NF-0603SMT
100NF-0603SMT
C170
C223
C208
C213
100NF-0603SMT
100NF-0603SMT
10NF-0603SMT
10NF-0603SMT
2_5V
10NF-0603SMT
10UF-16V-TANTBSMT
100NF-0603SMT
C186
1
2
10NF-0402SMT
100NF-0603SMT
C175
C224
C214
100NF-0603SMT
100NF-0603SMT
100NF-0603SMT
1_5V
C215
DDR3_VREF
C187
100NF-0603SMT
22UF-16V-TANTBSMT
22UF-16V-TANTBSMT
6
VCC
GND
PAD
100NF-0603SMT
DDR3_K0
5
C204
C188
100NF-0603SMT
100NF-0603SMT
J2
J2
H2
H2
F2
F2
E2
E2
G2
G2
B2
B2
A2
A2
C2
C2
D2
D2
1
2
DDR3_K0#
KOC
C216
22
3
7
R147
240R-0603SMT
C189
PLACE CLOSE TO MEMORY CHIP
100NF-0603SMT
2_5V
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 17. DDR3 Memory
SWITCH[1..8]
23
A
B
C
D
14
5
3_3V
DP
P
N
M
L
K
J
H
G
F
E
D
C
B
D23
SEG2
11
6
RN8F
RN8G
6
11
10
SEG3
12
8
RN8H
150R
EXB2HV151JV
7
9
10
SEG0
SEG1
SEG4
5
13
RN8E
4
7
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
RN8C
14
15
16
9
10
11
SEG12
RN8D
3
2
13
12
8
RN8B
9
1
8
7
6
5
4
SEG13
SEG14
16
RN6H
RN6G
12
RN8A
RN6F
4
15
RN6E
13
RN6D
2
3
1
5
RN6A
16
1
EXB2HV151JV
15
RN6B
2
150R
14
3
RN6C
4
14-SEGMENT DISPLAY
14-SEGMENT
A
4
TDA DIP-8
SW3
X1_POLL LED2
LED0
LED6
LED[0:7]
LED7
8 4_7K
9 RN9H
EXB2HV472JV
3
10 RN9G
7 4_7K
EXB2HV472JV
SWITCH8
6 4_7K
11 RN9F
EXB2HV472JV
SWITCH6
SWITCH7
4 4_7K
13 RN9D
EXB2HV472JV
5 4_7K
12 RN9E
EXB2HV472JV
SWITCH5
3 4_7K
14 RN9C
EXB2HV472JV
SWITCH3
SWITCH4
2 4_7K
15 RN9B
EXB2HV472JV
SWITCH2
1_5V
1 4_7K
16 RN9A
EXB2HV472JV
SWITCH1
X1_USR1
X1_USR2
X1_PLL_LK
LED3
LED5
X1_L0
LED1
DIP SWITCH/BANK=1.5V
X1_USR0
LED4
LEDs
LED USER 3
D26
LED_RED_0603
X1_USR3
D24
LED_YELLOW_0603
POLLING STATUS
D29
LED_BLUE_0603
LED USER 0
SWITCH1
SWITCH2
SWITCH3
SWITCH4
SWITCH5
SWITCH6
SWITCH7
SWITCH8
USR0_PU
USR3_PU
POLL_PU
DL_UP_PU
3
DL UP
D21
LED_GREEN_0603
X1_DL_UP
SWITCH[1..8]
5
Date:
Size
B
Title
USR1_PU
USR2_PU
D28
LED_BLUE_0603
LED USER 1
LED USER 2
D27
LED_RED_0603
2
L0_PU
Wednesday, February 09, 2011
1
Sheet
ECP3 VERSA Eval Board
Project
[5]
[6]
SWITCH[1:8]
SEG[0:14]
LED[0:7]
2 470R
15 RN7B
EXB2HV471JV
8 470R
9 RN7H
EXB2HV471JV
3 470R
14 RN7C
EXB2HV471JV
6 470R
11 RN7F
EXB2HV471JV
[7]
8
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
USR1_PU
PLL_LK_PU
USR2_PU
L0_PU
1 470R
16 RN7A
EXB2HV471JV
7 470R
10 RN7G
EXB2HV471JV
POLL_PU
USR0_PU
13 RN7D
4 470R
EXB2HV471JV
USR3_PU
3_3V
5 470R
12 RN7E
EXB2HV471JV
1
DL_UP_PU
LEDs & Switches
PLL_LK_PU
D25
LED_YELLOW_0603
PLL LOCK STATUS
D22
LED_GREEN_0603
L0
2
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 18. LEDs and Switches
SEG[0:14]
A
B
C
D
2
C228
DI
2
1
TANT
DI
C229
6.8UF-0805SMT
DI
FB25
MPZ1608Y600B
SDA
[3]
3_3V
SCL
[3]
10NF-0603SMT
C227
DI
100NF-0603SMT
6V
DI
MPZ1608Y600B
FB24
6
GND
VCC
J13
C231
DI
EN
OUTP
C233
DI
CLK_VCC
CLK_SDA
3_3V
C235
DI
4
C236
DI
[4]
[4]
PCIE_CLKP
PCIE_CLKN
D30
LED_GREEN_0603
R160
0R-0402SMT
R162
4_7K-0402SMT
10NF-0603SMT
VCCO
560PF-0603SMT
C234
DI
R163
3_3V 680R-0402SMT
156MHz_EN [3]
156MHz_VREF
R167
470R-0402SMT
DI
CLK_SCL
10NF-0603SMT
0R-0603SMT
100NF-0603SMT
C232
DI
100NF-0603SMT
CLK_RESETn
R170
0R-0603SMT
R169
[3]
[4]
PRSNT
1
R166
DI
220R-0402SMT
156MHz
156MHz_EN
4
R159
DI
220R-0402SMT
Place bypass caps close to output bank
supply pins.
100NF-0603SMT
5
1
2
3
HEADER 3(DNP)
3
X2
156.25MHz
NC1
2
PAD
7
NC2
5
1
3
R174
1K-0603SMT
R171
4_7K-0402SMT
DI
DI
19
18
17
156MHz
156MHz_VREF
U13
DI
ispCLOCK5406D
CLK_VCC
TDO
TMS
TCK
TDI
FBKP
FBKN
FBKVTT
REFBP
REFBN
REFBVTT
REFAP
REFAN
REFAVTT
RREF
RESETb
USER0
USER1
USER2
USER3
CLK_VCC
VCC
NC
TMS
TCK
GND
7
HEADER 10
INITN
DONE
1
VCCO_5
BANK_5P
BANK_5N
GNDO_5
VCCO_4
BANK_4P
BANK_4N
GNDO_4
VCCO_3
BANK_3P
BANK_3N
GNDO_3
VCCO_2
BANK_2P
BANK_2N
GNDO_2
VCCO_1
BANK_1P
BANK_1N
GNDO_1
VCCO_0
BANK_0P
BANK_0N
GNDO_0
ispEN_N
TDI
TDO
J14
2
3
4
5
6
8
9
10
DNI
R172
R173
4_7K-0402SMT 4_7K-0402SMT
DI
38
39
40
41
22
21
20
16
15
14
24
42
48
47
46
45
PCIE_CLKP
PCIE_CLKN
CLK_RESETn
CLK_LOCK1
CLK_SDA
CLK_SCL
49
VCCD
44
DIE_PAD
3
43
GNDD
4
VCCJ
23
VCCA
37
GNDA
13
24
3_3V
4
2
3
1
5
6
7
8
12
10
11
9
25
27
26
28
32
31
30
29
33
35
34
36
C230
3_3V
5
2
VCCO
2
Date:
Size
B
Title
EXPCON_OSC
10R-0402SMT
PCLKC0
10R-0402SMT
PCLKT0
10R-0402SMT
PCSA_REFCLKN
10R-0402SMT
PCSA_REFCLKP
10R-0402SMT
Tuesday, February 22, 2011
1
Sheet
ECP3 VERSA Eval Board
Project
[7]
[7]
EXPCON_OSC
PCLKC0
PCLKT0
PCSA_REFCLKN
PCSA_REFCLKP
[10]
[4]
[4]
9
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
REF CLOCK GEN
R168
DI
R165
DI
R161
DI
R164
DI
R158
DI
1
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 19. Reference Clock Generator
100NF-0603SMT
A
B
C
5
GND
TP12
R176
0R-0603SMT
3_3V
LFE3-35E-FN484CES
VTT2
VCCIO2
VCCIO2
4
L17
J15
K16
E22
F22
J17
J18
G21
G22
J19
J20
H21
H22
K17
K18
J22
K22
K20
K19
K21
L21
L18
L19
L22
M22
M21
M20
P21
N22
M18
N17
EXPCON_OSC
PR18A/RDQ23
PR18B/RDQ23
PR20A/RDQ23
PR20B/RDQ23
PR21A/RDQ23
PR21B/RDQ23
PR23A/RDQS23_P
PR23B/RDQS23_N
PR24A/RDQ23
PR24B/RDQ23
PR26A/VREF1_2/RDQ23
PR26B/VREF2_2/RDQ23
PR27A/RDQ32
PR27B/RDQ32
PR29A/RUM0_GDLLT_IN_A/RDQ32
PR29B/RUM0_GDLLT_IN_B/RDQ32
PR30A/RUM0_GDLLT_FB_A/RDQ32
PR30B/RUM0_GDLLT_FB_B/RDQ32
PR32A/RDQS32_P
PR32B/RDQS32_N
PR33A/RDQ32
PR33B/RDQ32
PR35A/PCLKT2_0/RDQ32
PR35B/PCLKC2_0/RDQ32
PR35E_A/RUM0_GPLLT_FB_A/RDQ32
PR35E_B/RUM0_GPLLT_FB_B/RDQ32
PR35E_C/RUM0_GPLLT_IN_A/RDQ32
PR35E_D/RUM0_GPLLT_IN_B/RDQ32
U1D
5VIN
TP13
R175
0R-0603SMT
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
TP14
C240
C239
C238
3_3V
2_TXC
C237
3_3V
EXPCON_IO32
EXPCON_IO33
EXPCON_IO34
EXPCON_IO35
2_TXC
EXPCON_IO45
EXPCON_IO44
EXPCON_IO43
EXPCON_IO42
EXPCON_IO41
EXPCON_IO40
CARDSEL#
HPE_RESOUT#
EXPCON_IO39
EXPCON_IO38
EXPCON_IO37
EXPCON_IO36
EXPCON_IO30
EXPCON_IO31
[9]
EXPCON_IO29
EXPCON_IO31
EXPCON_IO33
EXPCON_IO35
EXPCON_IO37
EXPCON_IO39
EXPCON_IO41
EXPCON_IO43
EXPCON_IO45
[6]
Pin 2 removed for coding
of expansion board
EXPCON_OSC
HDR40
X3
10NF-0402SMT
2_5V
1
3
EXPCON_2V5
5
EXPCON_IO30
7
EXPCON_IO32
9
EXPCON_IO34
11
EXPCON_IO36
13
EXPCON_IO38
15
EXPCON_IO40
17
EXPCON_IO42
19
EXPCON_IO44
21
23
EXPCON_2V5
25
27
29
EXPCON_OSC
EXPCON_CLKIN 31
EXPCON_CLKOUT 33
35
37
39
EXPCON_3V3
100NF-0603SMT
4
10NF-0402SMT
25
100NF-0603SMT
D
5
3
HDR40
X4
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
VCCIO1
VCCIO1
H14
G13
B11
B12
C12
D12
A12
A13
E12
E13
C13
C14
D13
D14
A14
B14
F13
F14
A15
B15
E16
E15
C15
D15
G15
G14
A16
B16
F15
F16
A17
B18
C17
C16
A18
A19
D16
D17
EXPCON_IO26
CARDSEL#
EXPCON_IO23
EXPCON_IO20
EXPCON_IO1
EXPCON_IO3
EXPCON_IO5
EXPCON_IO7
EXPCON_IO9
EXPCON_IO11
EXPCON_IO13
EXPCON_IO15
EXPCON_3V3
PT38A/TDQ43
PT38B/TDQ43
PT40A/PCLKT1_0/TDQ43
PT40B/PCLKC1_0/TDQ43
PT41A/TDQ43
PT41B/TDQ43
PT43A/TDQS43_P
PT43B/TDQS43_N
PT44A/TDQ43
PT44B/TDQ43
PT46A/TDQ43
PT46B/TDQ43
PT47A/TDQ52
PT47B/TDQ52
PT49A/TDQ52
PT49B/TDQ52
PT50A/TDQ52
PT50B/TDQ52
PT52A/TDQS52_P
PT52B/TDQS52_N
PT53A/TDQ52
PT53B/TDQ52
PT55A/TDQ52
PT55B/TDQ52
PT56A/TDQ61
PT56B/TDQ61
PT58A/TDQ61
PT58B/TDQ61
PT59A/TDQ61
PT59B/TDQ61
PT61A/TDQS61_P
PT61B/TDQS61_N
PT62A/TDQ61
PT62B/TDQ61
PT64A/VREF1_1/TDQ61
PT64B/VREF2_1/TDQ61
U1C
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
LFE3-35E-FN484CES
EXPCON_IO16
EXPCON_IO17
EXPCON_IO18
EXPCON_IO19
EXPCON_IO21
EXPCON_IO22
EXPCON_IO24
EXPCON_IO25
EXPCON_IO27
EXPCON_IO28
HPE_RESOUT#
EXPCON_IO0
EXPCON_IO2
EXPCON_IO4
EXPCON_IO6
EXPCON_IO8
EXPCON_IO10
EXPCON_IO12
EXPCON_IO14
3
3_3V
EXPCON_IO26
EXPCON_IO27
EXPCON_IO28
EXPCON_IO29
EXPCON_CLKIN
EXPCON_IO16
EXPCON_IO17
EXPCON_IO18
EXPCON_IO19
EXPCON_IO20
EXPCON_IO21
EXPCON_IO22
EXPCON_IO23
EXPCON_IO24
EXPCON_IO25
2
R177
0R-0603SMT- DNI
EXPCON_IO0
EXPCON_IO1
1_TXC
EXPCON_CLKOUT
EXPCON_IO2
EXPCON_IO3
EXPCON_IO4
EXPCON_IO5
EXPCON_IO6
EXPCON_IO7
EXPCON_IO8
EXPCON_IO9
EXPCON_IO10
EXPCON_IO11
EXPCON_IO12
EXPCON_IO13
EXPCON_IO14
EXPCON_IO15
3_3V
2
1_TXC
Date:
Size
B
Title
Friday, March 18, 2011
1
Sheet
ECP3 VERSA Eval Board
Project
10
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
Expansion Connector
[5]
1
A
B
C
D
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 20. Expansion Connector
26
A
B
TH2
TH1
5
ThruHole
ThruHole
TH3
ThruHole
TH4
ThruHole
4
3
Date:
Size
A
Title
2
Friday, March 18, 2011
Sheet
ECP3 VERSA Eval Board
Project
Mechanical
11
1
of
11
Rev
B
1605 Valley Center Parkway
Bethlehem, PA 18017
4.75" x 6.6in
Dimensions are approximations only.
Refer to the PCIe Card Electromechanical Spec Rev 1.1/2.0
1
A
B
C
2
C
3
D
4
D
5
LatticeECP3 Versa Evaluation Board
User’s Guide
Figure 21. Mechanical Drawing
LatticeECP3 Versa Evaluation Board
User’s Guide
Appendix B. Bill of Materials
Table 12. LatticeECP3 Versa Evaluation Board Bill of Materials
Item
Quantity
1
1
CN1
Reference
PCI Express x1 Edge Finger
Connectors
Part
Manufacturer
2
34
C1, C2, C3, C4, C5, C15,
C16, C20, C21, C29, C33,
C83, C85, C89, C92, C96,
C97, C98, C99, C100,
C108, C134, C135, C136,
C137, C138, C146, C202,
C203, C206, C207, C208,
C237, C239
10NF-0402SMT
Panasonic
ECJ0EB1E103K
CAP .01UF 25V
CERAMIC X7R 0402
3
25
C6, C7, C8, C9, C11, C22,
C23, C28, C34, C66, C67,
C68, C69, C70, C72, C73,
C77, C81, C82, C88, C91,
C241, C242, C243, C244
100NF-0402SMT
Panasonic
ECJ-0EB1A104K
CAP .1UF 10V CERAMIC
X5R 0402
4
9
C14, C19, C24, C27, C35,
C171, C173, C178, C181
1UF-16V-0805SMT
Panasonic
ECJ-2FB1C105K
CAP 1UF 16V CERAMIC
0805 X5R
5
7
C13, C18, C25, C26, C36,
C176, C180
22UF-16V-TANTBSMT
Kemet
T491B226M016AT
CAPACITOR TANT 22UF
16V 20% SMD
6
4
C17, C30, C37, C51
10uF, 25V-1206SMT
TDK Corporation
C3216Y5V1E106Z
CAP CER 10UF 25V Y5V
1206
7
4
C31, C32, C90, C93
1NF-0402SMT
TDK Corporation
C1005C0G1E102J
CAP CER 1000PF 25V
C0G 5% 0402
8
4
C38, C39, C52, C53
220NF-0402SMT
TDK Corporation
C1005X7R1C223K
CAP CER 22000PF 16V
X7R 10% 0402
9
10
C40, C41, C42, C49, C50,
C54, C55, C58, C63, C64
22uF, 6.3V-0805SMT
TDK Corporation
C2012X5R0J226M
CAP CER 22UF 6.3V X5R
20% 0805
10
4
C43, C44, C56, C57
1000pF-0402SMT
Panasonic
ECJ-0EB1E102K
CAP 1000PF 25V
CERAMIC X7R 0402
11
4
C45, C48, C59, C62
330pF-0402SMT
TDK Corporation
C1005C0G1H331J
CAP CER 330PF 50V
C0G 5% 0402
12
2
C46, C47
10pF-0402SMT
TDK Corporation
C1005C0G1H100D
CAP CER 10PF 50V C0G
0402
12A
0
C60, C61
10pF-0402SMT
DNI
13
2
C65, C71
4_7UF-10V-SMT
TDK Corporation
C1608X5R1A475K
CAP CER 4.7UF 10V X5R
0603
14
1
C74
3_3UF-10V-SMT
TDK Corporation
C1608X5R1A335K
CAP CER 3.3UF 10V X5R
0603
15
2
C75, C76
DNI
16
75
C78, C84, C95, C102,
C104, C105, C107, C109,
C110, C113, C115, C118,
C119, C120, C121, C122,
C124, C126, C128, C129,
C130, C131, C133, C140,
C142, C144, C145, C147,
C148, C151, C153, C154,
C155, C156, C157, C160,
C162, C164, C166, C167,
C168, C169, C172, C174,
C175, C183, C185, C186,
C188, C189, C191, C193,
C195, C197, C199, C201,
C205, C210, C212, C213,
C214, C215, C216, C218,
C220, C222, C224, C225,
C227, C230, C231, C232,
C233, C238, C240
100NF-0603SMT
Panasonic
ECJ-1VF1C104Z
CAP .1UF 16V CERAMIC
Y5V 0603
17
2
C79, C80
12PF-0603SMT
TDK Corporation
C1608C0G1H120J
CAP CER 12PF 50V C0G
5% 0603
18
2
C86, C87
100NFX5R-0402SMT
Kemet
C0402C104K8PACTU
CAP .10UF 10V
CERAMIC X5R 0402
19
18
C94, C101, C103, C106,
C114, C116, C117, C123,
C125, C132, C139, C141,
C143, C152, C158, C159,
C161, C163
10uF/6V3/X7R-0805SMT
AVX
08056C106KAT2A
CAP CER 10UF 6.3V X7R
10% 0805
20
4
C111, C112, C149, C150
27pF-0603SMT
Kemet
C0603C270J5GACTU
CAP CERAMIC 27PF 50V
NP0 0603
27
Part Number
Description
PCB fingers
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 12. LatticeECP3 Versa Evaluation Board Bill of Materials (Continued)
Item
Quantity
21
2
C127, C165
Reference
4_7UF-16V-0805SMT
Part
TDK Corporation
Manufacturer
C2012Y5V1C475Z/0.85
CAP CER 4.7UF 16V Y5V
0805
22
1
C170
47UF-16V-TANTBSMT
Kemet
B45196H2476K209
CAP TANTALUM 47UF
10V 10% SMD
23
1
C177
100UF-D3POSCAP
Sanyo
6TPE100MI
100UF, 6.3V , D2E.
POSCAP
24
1
C179
10UF-16V-TANTBSMT
AVX
TAJB106K016R
CAP TANTALUM 10UF
16V 10% SMD
25
20
C182, C184, C187, C190,
C192, C194, C196, C198,
C200, C204, C209, C211,
C217, C219, C221, C223,
C226, C228, C234, C236
10NF-0603SMT
Kemet
C0603C103K5RACTU
CAP .01UF 50V
CERAMIC X7R 0603
26
1
C229
6.8UF-TANT-0805SMT
Kemet
T494R685K006AS
CAP TANT 6.8UF 6.3V
10% SMD
27
1
C235
560PF-0603SMT
Kemet
C0603C561K5RACTU
CAP 560PF 50V
CERAMIC X7R 0603
28
4
D1, D2, D5, D6
1N4448W
Fairchild
1N4448W
DIODE 75V 200MA
SOD523F
29
4
D3, D4, D7, D8
DFLS220L
Diodes Inc
DFLS220L
DIODE SCHOTTKY 2A
20V PWRDI 123
30
12
D9, D10, D11, D12, D13,
D15, D16, D20, D21, D22,
D30, D31
LED_GREEN_0603
Kingbright
APT1608SGC
LED 1.6X0.8MM 568NM
GRN CLR SMD
31
1
D14
SCHOTTKY/VISHAY-V12P10 Vishay
V12P10-M3/86A
DIODE SCHOTTKY 12A
100V SMPC TO-277A
32
5
D17, D18, D19, D26, D27
LED_RED_0603
Kingbright
APT1608EC
LED 1.6X0.8MM 625NM
RED CLR SMD
33
1
D23
14-SEGMENT
Kingbright
ACPSA04-41SRWA
LED Display
34
2
D24, D25
LED_YELLOW_0603
Kingbright
APT1608YC
LED 1.6X0.8MM 588NM
YLW CLR SMD
35
2
D28, D29
LED_BLUE_0603
Kingbright
APT1608QBC/D
LED 1.6X0.8 470NM BL
WTR CLR SMD
36
6
FB1, FB2, FB3, FB4, FB21, BLM41PG600SN1
FB22
Murata
BLM41PG600SN1
FERRITE CHIP 60 OHM
6000MA 1806
37
5
FB5, FB6, FB23, FB24,
FB25
MPZ1608Y600B
TDK
MPZ1608Y600B
FERRITE CHIP 60 OHM
2.3A 0603
38
14
FB7, FB8, FB9, FB10,
FB11, FB12, FB13, FB14,
FB15, FB16, FB17, FB18,
FB19, FB20
Z-600 ohm / 74279265
Wurth
74279265
FERRITE BEAD 600 OHM
.2A 0603
39
1
F1
F1251CT-ND
Littlefuse
0154010.DR
FUSEBLOCK WITH 10A
FUSE SMD
40
1
J1
PJ-032A
CUI
PJ-032A
CON PWR JCK 2.0 X
6.5MM VERT
41
1
J2
USB_MINI_AB
MOLEX
56579-0576
CONN RECEPT USB
5POS RT ANG SMD
42
2
J3, J14
HEADER 10
Samtec
TSW-110-07-T-S
10x1-0.25 Header
43
1
J4
HEADER 3X2
Samtec
TSW-103-07-T-D
3x2-0.25 Header
44
4
J5, J6, J7, J8
SMA
Molex
73391-0060
CONN JACK SMA STR 50
OHM PCB
45
1
J9
0826-1X2T-23-F
Bellfuse
0826-1X2T-23-F
CONN MAGJACK 2PORT
GIGABIT GO/Y
46
2
J10, J12
HEADER 2
Samtec
TSW-102-07-T-S
2x1-0.25 Header
47
1
J13
HEADER 3(DNP)
DNI
TSW-103-07-T-S
3x1-0.25 Header
48
4
L1, L2, L3, L4
4.7uH-SPD62R-472M
API Delavan
SPD62R-472M
6.60mm x 6.20mm x
3.00mm, 4.7uH Power
inductor
49
1
L5
1UH-1206SMT
Murata
LQM31PN1R0M00L
INDUCTOR 1.0UH 1.2A
1206
50
1
PP1
PROBEPOINT
DNI
51
4
Q1, Q2, Q3, Q4
2N2222/SOT23
Diodes Inc
MMBT2222A-7
TRANS NPN 40V 350MW
SMD SOT-23
52
2
Q5, Q6
BCP69-16
NXP
Semiconductors
BCP69-16
TRANSISTOR PNP 20V
1A SOT223
28
Part Number
Description
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 12. LatticeECP3 Versa Evaluation Board Bill of Materials (Continued)
Item
Quantity
53
5
RN1, RN2, RN3, RN4, RN5 741X083-100R
Reference
Part
CTS
Manufacturer
741X083101JP
RES ARRAY 100 OHM
8TERM 4RES SMD
54
2
RN6, RN8
EXB2HV151JV
Panasonic
EXB2HV151JV
RES ARRAY 150 OHM 5%
8 RES SMD
55
1
RN7
EXB2HV471JV
Panasonic
EXB2HV471JV
RES ARRAY 470 OHM 5%
8 RES SMD
56
1
RN9
EXB2HV472JV
Panasonic
EXB2HV472JV
RES ARRAY 4.7K OHM
5% 8 RES SMD
57
1
RP1
CTS-RT1402B7
CTS Corporation
RT2402B7
Resistor/Electrocomponents
RES NET DDR SDRAM
50 OHM 3X9 BGA
58
14
R1, R2, R32, R33, R36,
R38, R141, R145, R146,
R169, R170, R175, R176,
R177
0R-0603SMT
Panasonic
ERJ-3GEY0R00V
RES 0.0 OHM 1/10W 0603
SMD
59
7
R3, R4, R143, R144, R148, OPEN-0603SMT
R149, R178
DNI
60
16
R5, R9, R21, R41, R42,
R43, R54, R63, R64, R66,
R67, R68, R69, R70, R71,
R157
10K-0402SMT
Panasonic
ERJ-2RKF1002X
RES 10.0K OHM 1/10W
1% 0402 SMD
61
4
R6, R10, R12, R14
51K-0402SMT
Panasonic
ERJ-2RKF5102X
RES 51.0K OHM 1/10W
1% 0402 SMD
62
1
R7
21_5K-0402SMT
Panasonic
ERJ-2RKF2152X
RES 21.5K OHM 1/10W
1% 0402 SMD
63
1
R8
35_7K-0402SMT
Panasonic
ERJ-2RKF3572X
RES 35.7K OHM 1/10W
1% 0402 SMD
64
1
R11
34K-0402SMT
Panasonic
ERJ-2RKF3402X
RES 34.0K OHM 1/10W
1% 0402 SMD
65
1
R13
11_5K-0402SMT
Panasonic
ERJ-2RKF1152X
RES 11.5K OHM 1/10W
1% 0402 SMD
66
1
R15
5_11K-0402SMT
Panasonic
ERJ-2RKF5111X
RES 5.11K OHM 1/10W
1% 0402 SMD
67
1
R16
15K-0402SMT
Panasonic
ERJ-2RKF1502X
RES 15.0K OHM 1/10W
1% 0402 SMD
68
1
R17
16_9K-0402SMT
Panasonic
ERJ-2RKF1692X
RES 16.9K OHM 1/10W
1% 0402 SMD
69
1
R18
63_4K-0402SMT
Panasonic
ERJ-2RKF6342X
RES 63.4K OHM 1/10W
1% 0402 SMD
70
4
R22, R23, R24, R25
1_8K-1206SMT
Panasonic
ERJ-8ENF1801V
RES 1.80K OHM 1/4W 1%
1206 SMD
71
4
R26, R30, R31, R61, R179
220R-0603SMT
Panasonic
ERJ-3EKF2200V
RES 220 OHM 1/10W 1%
0603 SMD
72
5
R27, R28, R29, R37, R65
10K-0603SMT
Panasonic
ERJ-3EKF1002V
RES 10.0K OHM 1/10W
1% 0603 SMD
73
14
R34, R40, R51, R53, R100, 4_7K-0402SMT
R101, R103, R134, R135,
R137, R162, R171, R172,
R173
Panasonic
ERJ-2RKF4701X
RES 4.70K OHM 1/10W
1% 0402 SMD
74
2
R35, R39
27R-0603SMT
Panasonic
ERJ-3EKF27R0V
RES 27.0 OHM 1/10W 1%
0603 SMD
75
1
R44
12K-0603SMT
Panasonic
ERJ-3EKF1202V
RES 12.0K OHM 1/10W
1% 0603 SMD
76
8
R45, R46, R47, R57, R58,
R59, R72, R142
4_7K-0603SMT
Panasonic
ERJ-3EKF4701V
RES 4.70K OHM 1/10W
1% 0603 SMD
77
1
R48
2_2K-0603SMT
Panasonic
ERJ-3EKF2201V
RES 2.20K OHM 1/10W
1% 0603 SMD
78
2
R49, R174
1K-0603SMT
Panasonic
ERJ-3EKF1001V
RES 1.00K OHM 1/10W
1% 0603 SMD
79
1
R50
1M-0603SMT
Panasonic
ERJ-3EKF1004V
RES 1.00M OHM 1/10W
1% 0603 SMD
80
3
R55, R56, R60
680R-0603SMT
Panasonic
ERJ-3EKF6800V
RES 680 OHM 1/10W 1%
0603 SMD
81
1
R62
OPEN-0402SMT
DNI
82
5
R73, R74, R107, R108,
R156
100R-0402SMT
Panasonic
ERJ-2RKF1000X
RES 100 OHM 1/10W 1%
0402 SMD
29
Part Number
Description
LatticeECP3 Versa Evaluation Board
User’s Guide
Table 12. LatticeECP3 Versa Evaluation Board Bill of Materials (Continued)
Item
Quantity
83
47
R52, R75, R76, R77, R78, 0R-0402SMT
R79, R80, R81, R82, R84,
R85, R86, R87, R88, R89,
R90, R91, R93, R94, R95,
R96, R97, R98, R99, R104,
R109, R110, R111, R112,
R113, R114, R115, R116,
R117, R118, R120, R121,
R122, R123, R124, R125,
R126, R127, R129, R130,
R131, R160
Reference
Part
Panasonic
Manufacturer
ERJ-2GE0R00X
Part Number
RES 0.0 OHM 1/10W 0402
SMD
Description
84
4
R83, R92, R119, R128
20R-0402SMT
Vishay
CRCW040220R0FKED
RES 20.0 OHM 1/16W 1%
0402 SMD
85
2
R102, R136
1K-0402SMT
Panasonic
ERJ-2RKF1001X
RES 1.00K OHM 1/10W
1% 0402 SMD
86
2
R105, R139
4_99K-0402SMT
Panasonic
ERJ-2RKF4991X
RES 4.99K OHM 1/10W
1% 0402 SMD
87
2
R106, R140
4_75K-0603SMT
Panasonic
ERJ-3EKF4751V
RES 4.75K OHM 1/10W
1% 0603 SMD
88
3
R132, R133, R138
33R-0402SMT
Panasonic
ERJ-2RKF33R0X
RES 33.0 OHM 1/10W 1%
0402 SMD
89
1
R147
240R-0603SMT
Panasonic
ERJ-3EKF2400V
RES 240 OHM 1/10W 1%
0603 SMD
90
6
R150, R151, R152, R153,
R154, R155
50R-0402SMT
Vishay
FC0402E50R0FST1
RES 50 OHM 50MW +/1% 0402 SMD
91
5
R158, R161, R164, R165,
R168
10R-0402SMT
Panasonic
ERJ-2RKF2200X
RES 200 OHM 1/10W 1%
0402 SMD
92
2
R159, R166
220R-0402SMT
Panasonic
ERJ-2RKF10R0X
RES 10.0 OHM 1/10W 1%
0402 SMD
93
1
R163
680R-0402SMT
Panasonic
ERJ-2RKF6800X
RES 680 OHM 1/10W 1%
0402 SMD
94
1
R167
470R-0402SMT
Panasonic
ERJ-2RKF4700X
RES 470 OHM 1/10W 1%
0402 SMD
95
2
SW1, SW2
PHP03T
Panasonic
EVQ-Q2K03W
SPST SMD
96
1
SW3
TDA DIP-8
C&K
TDA08H0SB1
8-DIP
97
14
TP1, TP2, TP3, TP4, TP5, TestPoint
TP6, TP7, TP8, TP9, TP10,
TP11, TP12, TP13, TP14
98
1
U1
LFE3-35E-FN484CES
Lattice Semiconductor
99
1
U2
LT3029EDE
Linear Tech
100
2
U3, U4
LT3508EUF
101
1
U5
FT2232HL
FTDI
FTD2232H
USB-UART/JTAG
102
1
U6
93LC56-SO8
MicroChip
93LC56/SN
IC EEPROM 2KBIT 2MHZ
8SOIC
103
1
U7
MAX6817
Maxim
MAX6817-EUT+T
debounce
104
1
U8
M25P64-FLASH
STMicro
M25P64-VMF6TP
Serial Flash
105
2
U9, U10
88E1119R_72QFN
Marvell-88E1119R
GPHY
106
1
U11
ddr3-96bga
Micron
MT41J64M16JT-15E:G
64Mb/x16, 1.5V, 96-ball
FBGA, 667 MHz, DDR31333
107
1
U12
LP2998-SO8
National 
Semiconductor
LP2998MAX/NOPB
Termination regulator
108
1
U13
ispClock5406D
109
1
X1
DSC-100_00MHz
Discera
DSC1123AE2-100.0000
Alternate:
Abracon-ASVMPLV100.000MHZ-R-T
100MHz Low-Jitter LVDS
Clock Oscillator, 7mm x
5mm, 50ppm
110
1
X2
156.25MHz
Discera
DSC1121Al1-156.2500
Alternate:
Abracon-ASVMPC156.250MHZ-T
156.25MHz Single ended
CMOS Clock Oscillator,
7mm x 5mm
111
2
EX3, EX4
HDR40
Samtec
TSW-120-07-T-D
HEADER 40POS .100" DL
TIN
112
1
Y1
ATS120SM-1 HC-49/US-SM
CTS
ATS120SM-T
CRYSTAL 12.0000MHZ
20PF SMD
DNI
Linear Tech
Lattice Semiconductor
30
Table 12. LatticeECP3 Versa Evaluation Board Bill of Materials (Continued)
Item
Quantity
113
2
Y2, Y3
Reference
25MHZ CRYSTAL
Part
Citizen
Manufacturer
HC49US-25.000MABJUB
Part Number
CRYSTAL 25.000 MHZ
18PF HC49/US
Description
114
1
R19
30_1K-0402SMT
Panasonic
ERJ-2RKF3012X
RES 30.1K OHM 1/10W
1% 0402 SMD
115
1
R20
20K-0402SMT
Panasonic
ERJ-2RKF2002X
RES 20.0K OHM 1/10W
1% 0402 SMD
115
2
C245, C246
100PF-0402SMT
Panasonic
ECJ-0EB1E102K
CAP 100PF 25V
CERAMIC X7R 0402
116
2
C10, C12
3_3UF-10V-0805SMT
Panasonic
ECJ-2FB1A335K
CAP 3.3UF 10V
CERAMIC X5R 0805