OmniAssure™ Contactless Smart Card Readers Smart card technology is ideally suited for access control, Reader versions include smart card reader only, smart card logical (PC) access, storage of biometric templates, secure reader plus keypad, fingerprint smart card reader, and a IDs with embedded tamper-proof digital photos, parking, multi-technology smart card/prox reader. All wall-mount ePurse and many other applications requiring secure and readers are sold as mullion with an optional U.S. gangbox reliable read/write cards. (4S electrical box) mounting kit. Compatible cards include: Honeywell’s OmniAssure™ readers eloquently combine compliance with convenience. Their U.S. patent-pending flash-on-card design make OmniAssure readers the easiest • HSPD-12/FIPS 201 PIV II cards (endpoint and transition), low-medium assurance to use in today’s market. With flash-on-card, the reader’s • TWIC (Transportation Worker Identification Credential) cards flash firmware can be easily updated to support changing • FRAC (First Responder Authentication Cards) government standards without removing the readers from • DoD CAC (Department of Defense Common Access Credentials) the wall. With other smart card readers, the configuration cards only change parameter settings for the currently • Open standard ISO14443 technologies (Mifare® Classic, DESFire®, and SmartMX®) installed firmware. • 125 kHz HID® Prox OmniAssure readers can retrofit most standard Honeywell or Wiegand-output proximity systems. The readers also feature built-in-hardware to support future RS485 protocols and both the reading/writing of smart card credentials. This protects the OmniAssure solution for changing needs in the future. Configurable output formats and protocols include: • Wiegand • Clock & Data • ISO7811 Clock & Data ABA Track 2 emulation • Serial (RS232/RS422/RS485) F E AT U R E S • Flash-on-card to update reader firmware to evolving smart card standards • Mullion and switch plate mounting • ADA compliant built-in audible buzzer • Two LEDs (red and green) • Configuration cards can be used to manage security keys and change the operating characteristics of the reader • Hidden mounting screws deter vandalism • Potted for superior weather resistance • Wiegand output and terminal connection OmniAssure™ Contactless Smart Card Readers BENEFITS Multi-Market Applicability Suitable for both government and commercial use. Non-government users can take advantage of ISO14443 technologies without the burden of U.S. data structures and infrastructures. ISO14443 technologies support symmetric encryption for any data format required, including 26-bit and 34-bit Wiegand. Multi-Technology = Transition Friendly Multi-technology OmniAssure readers transition easily from 125 kHz proximity to smart card technologies by interchangeably reading 125 kHz proximity and contactless smart cards. In facilities with a large ratio of cardholders to readers, this approach is often more cost-effective than applying smart tags/stickers to 125 kHz proximity cards. Standard Open ISO14443 is open because Philips Semiconductor has sold Mifare® Classic chips to multiple reader manufacturers and has licensed DESFire and SmartMX technologies to multiple reader manufacturers. This ensures longevity of an ISO14443 solution with multiple sourcing options. M I G R AT I O N O P T I O N S Control Panel 125 kHz HID Prox Card Proximity Reader Future Door Proximity Reader OPTION 1: Conversion using Dual-Tech Cards Dual-Tech Card (125 kHz + Smart = Mifare, DESFire, etc.) Prox/Keypad Reader OPTION 2: Conversion using Dual-Tech Readers 125 kHz HID Prox Card OT30 OT35 OT75 OT70 OT31 OT36 OmniAssure Dual-Tech Readers OmniAssure Smart Only Readers • Readers can be replaced slowly. • Cards can be replaced slowly. • 0T70 & OT75 fingerprint readers can be added. • Cards are less expensive than dual-tech cards. • OT30 & OT35 readers are less expensive than dual-tech readers • Cardholder database is not required to be updated initially. – OR – Control Panel Dual-Tech Card (125 kHz + Smart = Mifare, DESFire, etc.) OT30 Control Panel Smart Card = Mifare, DESFire, etc OT70 OT30 OT35 125 kHz HID Prox Card OT31 Smart Card = Mifare, DESFire, etc OT36 OT31 OT36 OmniAssure™ Contactless Smart Card Readers S P E C I F I C AT I O N S OT30, OT35 Smart Card Dimensions OT31, OT36 Smart Card + 125 kHz Prox Mullion: 5.59 x 1.81 x 0.98 inch 14.2 x 4.62 x 2.5 cm U.S. gangbox: 5.59 x 2.87 x 1.1 inch 14.2 x 7.32 x 2.8 cm OT70, OT75 Smart Fingerprint Mullion: 7.58 x 1.99 x 1.69 inch 19.25 x 5.05 x 4.3 cm U.S. gangbox: 8.58 x 2.99 x 2.05" 21.8 x 7.6 x 5.2 cm Mifare®, DESFire®, SmartMX®, PIV II, FRAC, DoD CAC, TWIC Mifare, DESFire, SmartMX, PIV II, FRAC, DoD CAC, TWIC, HID® Prox Mifare, DESFire, SmartMX Up to 1.18 inch (3 cm) Up to 0.43 inch (1.1 cm) Up to 1.18 inch (3 cm) Up to 1.18 inch (3 cm) Up to 0.43 inch (1.1 cm) Up to 1.18 inch (3 cm) 1326 ProxCard II Clam Shell N/A Up to 1.5 inch (4 cm) N/A 1386 ISOProx® II PVC Card N/A Up to 1 inch (2.5 cm) N/A Compatible Cards Max. Read Range1 ISO 14443A Card (Mifare) ISO 14443B Card (DESFire, SmartMX) ISO Standard Support 14443A, 14443B Available between card and reader and between reader and host Data Encryption PIN 4-bit burst, 8-bit burst N/A Up to 2 templates stored on smart card depending upon card type and fingerprint technology; 752 bytes for minutia; 350 bytes for user templates and records Enrollment Time N/A < 3 seconds Equal Error Rate (ERR) N/A 0.1%; Adjustable False Acceptance/ Rejection Rates N/A Adjustable Verification Time N/A < 1 second Biometrics Number of Fingerprint Templates & Size Regulatory Approvals2 UL/cUL, FCC, CE, Canada Radio* Operating Temperature Operating Humidity 32 to 140ºF (0 to 60ºC) 5 – 95% relative humidity, non-condensing 30-80%, non-condensing IP67 if connector is sealed IP42, Indoor use only 4.5 – 16 VDC 8 – 24 VDC 400 mA @ 5 VDC, 167 mA @ 12 VDC 417 mA @ 12 VDC, 208 mA @ 24 VDC Operating Voltage Range Optional Tamper Switch Accessory Tamper Output Output Interfaces (all built-in) Warranty 3 UL/cUL, FCC, CE, Canada Radio* -4 to 140ºF (-20 to 60ºC) IP Rating Maximum Power Consumption UL/cUL*, FCC, CE, Canada Radio* Wiegand, Clock & Data, RS485/RS232/RS422 Limited Lifetime 1 Actual operating distance will vary depending upon installation environment and proximity to metal. 2 * = submitted/pending 3 See Honeywell Access Systems’ Sales Policy for complete warranty details. 4 Fingerprints supported on Mifare and DESFire. Limited Lifetime 2 years OmniAssure™ Contactless Smart Card Readers ORDERING OMNIASSURE SERIES READERS OMNIASSURE SERIES CREDENTIALS Smart Card Only Readers: DESFire Credentials: OT30HONA Supports PIV II, DESFire® SNR, Mifare® SNR ODP4N00 Unprogrammed DESFire 4K PVC Card OT30HONAM Supports Mifare Secure Sector, Mifare SNR ODP4M00 OT30SPEC Custom configured Unprogrammed DESFire 4K PVC Card with Unencoded Magnetic Stripe ODP4N0026 Unprogrammed DESFire 4K, Programmed 26-bit HID Prox PVC Card ODP4M0026 Unprogrammed DESFire 4K, Programmed 26-bit HID Prox PVC Card with Unencoded Magnetic Stripe Smart Card plus 125 kHz HID Prox Readers: OT31HONA Supports PIV II, 125 kHz HID Prox OT31HONAS Supports DESFire SNR, Mifare SNR, 125 kHz HID® Prox ODP4M0034 Unprogrammed DESFire 4K, Programmed 34-bit HID Prox PVC Card OT31HONAM Supports Mifare Secure Sector, 125 kHz HID Prox ODP4M0034 Unprogrammed DESFire 4K, Programmed 34-bit HID Prox PVC Card with Unencoded Magnetic Stripe OT31SPEC Custom configured Mifare Credentials: Smart Card plus Keypad Readers: OFP1N00 Unprogrammed Mifare 1K PVC Card OT35HONA Supports PIV II, DESFire SNR, Mifare SNR OFP1M00 OT35HONAM Supports Mifare Secure Sector, Mifare SNR Unprogrammed Mifare 1K PVC Card with Unencoded Magnetic Stripe OT35SPEC Custom configured OFP4N00 Unprogrammed Mifare 4K PVC Card OFP4M00 Unprogrammed Mifare 4K PVC Card with Unencoded Magnetic Stripe Smart Card plus Keypad plus 125 kHz HID Prox Readers: OT36HONA Supports PIV II, 125 kHz HID Prox OFP1N0026 Unprogrammed Mifare 1K, Programmed 26-bit HID Prox PVC Card OT36HONAS Supports DESFire SNR, Mifare SNR, 125 kHz HID Prox OFP1M0026 Unprogrammed Mifare 1K, Programmed 26-bit HID Prox PVC Card with Unencoded Magnetic Stripe OT36HONAM Supports Mifare Secure Sector, 125 kHz HID Prox OFP4N0026 Unprogrammed Mifare 4K, Programmed 26-bit HID Prox PVC Card OT36SPEC Custom configured OFP4M0026 Unprogrammed Mifare 4K, Programmed 26-bit HID Prox PVC Card with Unencoded Magnetic Stripe OFP1N0034 Unprogrammed Mifare 1K, Programmed 34-bit HID Prox PVC Card OFP1M0034 Unprogrammed Mifare 1K, Programmed 34-bit HID Prox PVC Card with Unencoded Magnetic Stripe OFP4N0034 Unprogrammed Mifare 4K, Programmed 34-bit HID Prox PVC Card OFP4M0034 Unprogrammed Mifare 4K, Programmed 34-bit HID Prox PVC Card with Unencoded Magnetic Stripe Smart Card plus Fingerprint Readers: OT70HONA Supports DESFire SNR OT70HONAS Supports Mifare SNR OT70HONAM Supports Mifare Secure Sector OT70SPEC Custom configured Smart Card plus Keypad plus Fingerprint Readers: OT75HONA Supports DESFire SNR OT75HONAS Supports Mifare SNR OMNIASSURE MISCELLANEOUS PARTS OT75HONAM Supports Mifare Secure Sector IEMOUNT OT75SPEC Custom configured U.S. gangbox mounting kit for OT30, OT31, OT35, OT36 models IEMOUNT2 U.S. gangbox mounting kit for OT70, OT75 models IETAMPER Tamper switch accessory for all readers SNR = Serial Number. OmniAssure™ is a trademark of Honeywell International Inc. Mifare®, DESFire®, and SmartMX® are trademarks of Philips. HID®, HID® Prox and ISOProx® are trademarks of HID Global. For more information: www.honeywellaccess.com Honeywell Security Honeywell Access Systems 2700 Blankenbaker Pkwy, Suite 150 Louisville, KY 40299 1.800.675.3364 www.honeywell.com L/OMNIBEND/D October 2007 © 2007 Honeywell International Inc.