SLCC (CNP) www.vishay.com Vishay Sfernice Hermetic, 50 Mil Pitch, Leadless Chip Thin Film Resistor Networks FEATURES • High stability ultrafilm (0.05 % at 1000 h at + 70 °C under Pn) • Custom available (CNP) • Low noise < - 35 dB • SMD • Hermetic package Actual Size Capable of meeting the characteristics of MIL-PRF-83401 these networks are available in a wide range of resistance values: several standard configurations are presented with the SLCC series. • Leadless chip carrier • 10 to 100 k • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 SCHEMATIC SLCC 20 A03 SLCC 20 A06 1 kΩ to 100 kΩ 1 kΩ to 100 kΩ 13 12 11 10 9 13 12 11 10 9 14 15 16 17 18 8 7 6 5 4 14 8 15 7 16 6 17 5 18 4 19 20 1 2 3 19 20 1 2 3 SLCC 20A SLCC 20B (10 Isolated Resistors) (19 Resistors + 1 Common Point) 10 Ω to 100 kΩ 10 Ω to 100 kΩ 13 12 11 10 9 13 12 11 10 9 14 15 8 7 14 8 15 7 16 6 16 6 17 18 5 4 17 5 18 4 19 20 1 2 3 19 20 1 2 3 Gold Terminals Option: Tin/silver plating: 076 Notes • For values outside ohmic range please consult Vishay Sfernice • For custom networks a specific part number is used CNPxxxx. Please consult Vishay Sfernice STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE SLCC (CNP) 3535 10 to 100K POWER POWER RATING PER RATING PER RESISTOR (1) PACKAGE (1) W W 0.050 0.500 ABSOLUTE TOLERANCE (2) ±% 0.1, 0.5, 1, 2, 5 RATIO TOLERANCE ±% (2) 0.1, 0.25, 0.5, 1 ABSOLUTE TCR (3) ± ppm/°C RATIO TCR (4) ± ppm/°C 25 2, 5 Notes (1) at + 70 °C (2) Tighter specs on request (3) at - 55 °C to 155 °C (4) ± 2 ppm/°C typical, 5 ppm/°C maximum at - 55 °C to 155 °C Revision: 29-Aug-12 Document Number: 60014 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SLCC (CNP) www.vishay.com Vishay Sfernice PERFORMANCES TEST SPECIFICATIONS CONDITIONS 0.05 % 1000 h at + 70 °C under Pn Stability (R ratio) Voltage coefficient < 0.1 ppm/V Working voltage 100 VDC on R Noise - 35 dB typical Thermal EMF 0.1 μV/°C Shelf life stability < 50 ppm 1 year at + 25 °C CLIMATIC SPECIFICATIONS Operating temperature range - 55 °C to + 155 °C Storage temperature range - 55 °C to + 155 °C DIMENSIONS in millimeters [inches] D max. B F SLCC-20A06 1K AO Terminal #1 Indicator 20 Pin G typ. R typ. Terminal #1 C Index Corner F A typ. E typ. H A 1.27 [0.050] B 8.89 [0.350] C 8.89 [0.350] D 1.96 [0.077] E 0.635 [0.025] F 1.27 [0.050] G 1.02 [0.040] H 0.508 [0.020] PACKAGING Tape and reel 250 pieces per tape. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SLCC20A03-10KF005 S L C C 2 0 A 0 3 GLOBAL MODEL SCHEMATIC VALUE SLCC20 A B A03 A06 Decimal R, K or M - 1 0 K TOL. B (0.1 % D (0.5 % F (1.0 % G (2.0 % J (5.0 % 0.1 %) 0.25 %) 0.5 %) 1.0 %) 1.0 %) F T 0 0 5 PACKAGING OPTION T: Tape and reel Blank: Tube Leave blank if no option For custom specification: CNP 1186 GLOBAL MODEL REFERENCE Revision: 29-Aug-12 Reference is assigned by Vishay Sfernice Document Number: 60014 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000