MP www.vishay.com Vishay Dale Thin Film Molded, SC70 Thin Film Resistor, Surface Mount Network FEATURES • • • • MP 3 LEAD MP 4 LEAD Actual Size Vishay Dale Thin Film MP Series Dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as ± 0.05 %, ultra small size, 3 or 4 lead package and exceptional stability for all surface mount applications. The standard SC70 package format with common standard resistance values provide easy selection for most applications requiring matched pair resistor elements. If you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. Small physical size EIAJ SC70 format Tight resistance ratio tolerances ± 0.05 % Low TCR tracking ± 2 ppm Excellent long term ratio stability (R ± 0.015 % at 70 °C for 2000 h) • Center-tapped or isolated matched pair resistors • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition Note * Pb containing terminations are not RoHS compliant, exemptions may apply TYPICAL PERFORMANCE ABSOLUTE TRACKING 25 2 ABSOLUTE RATIO 0.1 0.05 TCR TOL. SCHEMATIC STANDARD RESISTANCE VALUES 3 R1 4 3 TYPE R2 R1 R2 MP3 1 2 3 LEAD VERSION 1 2 4 LEAD VERSION MP4 STANDARD VALUES R1 () R2 () 500 500 1K 1K 10K 10K 1K 1K 10K 10K 50K 50K STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 20-Oct-11 SPECIFICATIONS Passivated nichrome 3, 4 100 to 50 k per resistor ± 25 ppm/°C ± 2 ppm/°C (typical) ± 0.10 % to ± 1.0 % ± 0.05 % (standard), ± 1.0 % 0.075 W 0.150 W R ± 0.05 % R ± 0.015 % 0.1 ppm/V 100 V max. not to exceed P x R - 55 °C to + 125 °C - 55 °C to + 150 °C < - 30 dB 0.1 μV/°C R ± 0.01 % R ± 0.002 % CONDITIONS - 55 °C to + 125 °C - 55 °C to + 125 °C + 25 °C Maximum at + 70 °C Maximum at + 70 °C 2000 h at + 70 °C 2000 h at + 70 °C 1 year at + 25 °C 1 year at + 25 °C Document Number: 60092 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MP www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in millimeters D SC70 3L A2 A DIMENSION MIN. MAX. A 0.800 1.100 A1 0.000 0.100 A2 0.800 1.000 B 0.100 0.018 b1 0.400 0.500 b2 0.200 0.250 D 1.800 2.200 E 1.800 2.400 E1 1.150 1.350 e 1.300 - e2 A1 b2 E1 E B L e L1 D SC70 4L A2 A e A1 b2 b1 E1 E B L e2 0.650 - L1 L 0.100 0.030 MECHANICAL SPECIFICATIONS DERATING CURVE Passivated nichrome Substrate Material Silicon Body 100 Percent of Rated Power Resistive Element Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn85 Tin Lead and Lead (Pb)-free Finish Plated 100 % = 0.15 W 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MP32001AWS M M P 3 2 0 0 1 A W S P T 4 2 0 0 1 B T 1 GLOBAL MODEL (2 or 3 digits) LEADS RESISTANCE MP (Tin Lead) 3 4 The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. MPT (Lead (Pb)-free) (e3) TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % Example: 2001 = 2K (1K/1K) 2002 = 20K (10K/10K) PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) Note (1) Preferred packaging code Historical Part Number example: MP32002BW (for reference purposes only) MP 3 2002 B W SERIES LEADS RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING Revision: 20-Oct-11 Document Number: 60092 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000