Vision sensors XC-200 VS XC200M03X00EP Article number: 11086175 features Integrated flash controller User management Password protection Backup & Restore function Coordinate transformation flexible result conjunction integrated flash controller resolution 640 × 480 px sensor type 1/4” CCD, monochrome current I = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) I = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C) external illumination as accessory high-resolution mode max. 50 inspections per second high-speed mode (limited resolution) max. 100 inspections per second number of jobs (products) ≤ 255 features per job 32 width 53 mm (without lens/tube) defect image memory 32 height 99,5 mm (without lens/tube) signal processing Baumer FEX 4.0 depth 49,8 mm (without lens/tube) illumination direct connection (integrated flash controller) material housing: aluminum cover glass: PMMA lens C-mount weight ≤ 300 g (without lens/tube) max max flash time max. 1 ms (Duty Cycle max. 1:10) mechanical data ® electrical data environmental conditions voltage supply range +Vs 18 ... 30 V DC operating temperature +5 … +50 °C power consumption typical 5 W (I = 1,5 A at 24 V) storage temperature -20 … +70 °C digital inputs 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz case temperature max. +50 °C humidity 0 … 90 % (non-condensing) protection class IP 67 (with tube) vibration load IEC 60068-2-6 IEC 60068-2-64 mechanical shock resistance EN 60068-2-27 max digital outputs 5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable initial setup Ethernet (10BASE-T / 100BASE-TX) process interface TCP|UDP (Ethernet) visualization web interface integrated flash controller www.baumer.com 12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed) Data sheet VS XC200M03X00EP EN / 100516 voltage The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. general data page 1 / 2 Vision sensors XC-200 VS XC200M03X00EP Article number: 11086175 Ethernet connection M12 / 4-pin (on device) code types font 3 4 2 1 1: TD+ 3: TD- 2: RD+ 4: RD- electrical connection illumination M8 / 4-pin (on device) 1 3 2 DataMatrix (ECC 200) GS1-DataMatrix QR-Code PDF417 4 1: +24 V or +48 V Flash 3: Ground 2: +12 V or +24 V Flash 4: Flash Sync voltage outputs configurable by software many font styles (recommended: sans serif, proportional) Dot Matrix characters: A-Z a-z 0-9 + - . : / ( ) dimension drawing 40 identification 49,8 112,9 99,5 40 4x M4 /4 20 C-mount support 37,2 2x M4 /4 17 count contour points contour comparison brightness contrast area size count areas pattern comparison 40 barcode matrix code text 20 feature comparison distance circle angle count edges point position edge characteristics 53 51 geometry part location on contours part location on edges part location on circle part location on text line 28,5 feature checks part location 36 44 electrical connection M12 / 12-pin (on device) 7 6 8 9 12 11 5 1 4 10 2 3 OUT3 8: IN3 3: IN1 (Trigger) 9: OUT4 4: OUT1 10: IN4 5: IN2 11: IN5 6: OUT2 12: OUT5 XC Tube, XC Tube Module Ø 38,2 Ø 49,5 36 44 Ø 49,5 12 EN / 100516 7: Ground M47 x 0,75 PWR (+18-30 V DC) 2: M47 x 0,75 1: The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. matrix code 2/5 Industrial 2/5 Interleaved Codabar Code 39 Code 93 Code 128 PharmaCode EAN 8 EAN 13 UPC-A UPC-E GS1 DataBar GS1 128 4x M4 /4 barcode www.baumer.com Data sheet VS XC200M03X00EP page 2 / 2