1 3 2 4 REVISIONS REV A CABLE TIE SPC PN# VUVT-05M-M OR EQUIVALENT COLOR: BLACK MIN TENSILE STRENGTH: 18 lbs. QTY. 4 CABLE TIES SPACED 4.5" 1-1/2 ±1/8 2 3 A B C DESCRIPTION ADD NOTES 5&6/LABEL FORMAT ECO#07-7661 ADD PN FOR CUSTOMER ORDER ECO#07-7714 PIN 12 CHANGE ECO#08-8746 PIN 9 COLOR CHANGE PER ECO#10-12326 ADDED WEIGHT NOTE PER ECO 13-17172 B SEE NOTE 1 PIN# C WIRE COLOR TEXT HAS TO BE LEGIBLE WITH A MINIMUM OF .1" CHARACTER HEIGHT LABEL FORMAT: SynQor Cable PN#/REV Date code (YYWW) DESCRIPTION 1 VIOLET FAN_GOOD 2 YELLOW AC_POWER_GOOD 3 LIGHT BLUE DC_POWER_GOOD 4 ORANGE 5V_STANDBY 5 RED Vout+ 6 RED Vout+ 7 RED Vout+ 8 RED Vout+ 9 BROWN RS485_A 10 GREEN RS485_B 11 WHITE REMOTE_ENABLE 12 BLACK W/ WHITE STRIPE Vout- OR 12V STANDBY 13 BLACK Vout- 14 BLACK Vout- 15 BLACK Vout- 16 BLACK Vout- 1 APPROVED 09/24/07 11/21/07 05/15/08 07/19/10 9/26/13 IS IS IS IS JAK A 1-1/2±1/8 18±1/8 1-3/4±1/4 DATE SEE NOTE 1 NOTES: 1- USE MOLEX OR EQUIVALENT: 43025-1600 - 3.00mm (.118") Pitch Micro-Fit 3.0 Receptacle Housing WITH MOLEX OR EQUIVALENT: 43030-0008 - Micro-Fit 3.0 Crimp Terminal, (32 PIECES) 2- USE 20AWG WIRES (10x30 STRANDING) 18"LONG WIRE INSULATION: UL AWM Style 1569 - 300V, 105°C / CSA Type TRSR-64, 105°C 3- OVERALL NOMINAL WIRE DIAMETER: .067 4- ALL PARTS MUST BE UL RECOGNIZED AND CSA APPROVED 5- CABLE MANUFACTURER MUST FOLLOW CONNECTOR MANUFACTURER'S CRIMP GUIDELINES. 6- ALL PARTS/COMPONENTS MUST BE FREE OF DAMAGES, CUTS. 7- WEIGHT: 0.15 LBS (68.04g) 155 Swanson Road MA 01719 TOLERANCES: Unless otherwise specified: Boxborough, All dimensions in inches .X +/- .025 THIRD ANGLE PROJECTION .XX +/- .010 .XXX +/- .005 Angles +/- 1° SOURCE: PRO/E OUTPUTCABLE2 ACuQor Eval Cable PN AQ-CBL-OUT2C THIS DRAWING IS THE PROPERTY OF SYNQOR INC. It is not to be reproduced or copied, in whole or in part, or used for furnishing information to others, or for any purpose detrimental to the interests of SynQor. The information shown herein may be protected by patents owned or controlled by SynQor, 2 B SIZE A DATE 09/26/13 SCALE: 0.850 3 DWG. NO. DRAWN: 705-1000005 SHEET 1 of 1 CHECK: 4 C REV C