Mechanical Drawings Technical Specification 0.300 [7.62] 0.140 [3.56] 1.15 [29.21] 0.250 [6.35] TYP 1 2 3 4 5 6 +VIN IN RTN SHARE CASE ENA 1 MQFL-270-06S-Y-HB +SNS DC-DC CONVERTER 270Vin 6.0 Vout @ 20 A -SNS SYNC OUT SYNC IN 12 2.00 11 [50.80] 10 1.50 9 [38.10] 8 1.750 7 [44.45] ENA 2 MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN +VOUT 1.750 [44.45] 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 0.040 [1.02] PIN 0.050 [1.27] 0.220 [5.59] 0.375 [9.52] 2.50 [63.50] 2.96 [75.2] 0.228 [5.79] 0.390 [9.91] Case Z (variant of Y) 0.250 [6.35] Case Y Case W (variant of Y) 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 0.200 [5.08] TYP. NON-CUM. 0.420 [10.7] 0.040 [1.02] PIN 0.040 [1.02] PIN 0.220 [5.59] 0.050 [1.27] 0.420 [10.7] 0.050 [1.27] 0.220 [5.59] 0.050 [1.27] 2.80 [71.1] 0.525 [13.33] 0.390 [9.91] 0.390 [9.91] 0.525 [13.33] 2.80 [71.1] PIN DESIGNATIONS NOTES 1) Pins 0.040” (1.02mm) diameter 2) Pins Material: Copper Finish: Gold over Nickel plate 3) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm) 4) Weight: 2.8 oz (78.5 g) typical 5) Workmanship: Meets or exceeds IPC-A-610C Class II 6) Print Labeling on Top Surface per Product Label Format Drawing Phone 1-888-567-9596 Pin Function www.synqor.com 1 2 3 4 5 6 Pin Function Positive input Input return CASE Enable 1 Sync output Sync input 7 8 9 10 11 12 Positive output Output return - Sense + Sense Share Enable 2 01/22/09 Mechanical Drawings Technical Specification 0.093 [2.36] 1 2 3 4 5 6 +VIN ENA 2 IN RTN CASE SHARE +SNS MQFL-270-06S-X-HB DC-DC CONVERTER 270Vin 6.0 Vout @ 20 A ENA 1 SYNC OUT SYNC IN -SNS MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN +VOUT 12 11 10 9 8 7 0.250 [6.35] 1.50 [32.10] 1.260 [32.00] 0.200 [5.08] TYP. NON-CUM. 0.220 [5.59] PIN 2.50 [63.50] 2.76 [70.10] 3.00 [76.20] 0.050 [1.27] 0.28 [3.25] 0.220 [5.59] 2.96 [75.2] 0.228 [5.79] 0.390 [9.91] Case X 0.093 [2.36] 1 2 3 4 5 6 +VIN ENA 2 IN RTN SHARE MQFL-270-06S-U-HB CASE +SNS DC-DC CONVERTER 270Vin 6.0 Vout @ 20 A ENA 1 SYNC OUT SYNC IN -SNS MADE IN USA S/N 0000000 D/C 3205-301 CAGE 1WX10 OUT RTN +VOUT 12 11 10 9 8 7 0.250 [6.35] 0.200 [5.08] TYP. NON-CUM. 1.50 [32.10] 1.260 [32.00] 2.50 [63.50] 2.76 [70.10] 3.00 [76.20] 0.040 [1.02] PIN 0.42 [10.7] 0.28 [3.25] 0.050 [1.27] 0.220 [5.59] 2.80 [71.1] Case U 0.390 [9.91] PIN DESIGNATIONS NOTES 1) Pins 0.040” (1.02mm) diameter 2) Pins Material: Copper Finish: Gold over Nickel plate 3) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm) 4) Weight: 2.8 oz (78.5 g) typical 5) Workmanship: Meets or exceeds IPC-A-610C Class II 6) Print Labeling on Top Surface per Product Label Format Drawing Phone 1-888-567-9596 Pin Function www.synqor.com 1 2 3 4 5 6 Pin Function Positive input Input return CASE Enable 1 Sync output Sync input 7 8 9 10 11 12 Positive output Output return - Sense + Sense Share Enable 2 01/22/09