LITTELFUSE V300LA10P

Varistor Products
Radial Lead Varistors > LA Series
RoHS
LA Varistor Series
Description
The LA Series of transient voltage surge suppressors are
radial leaded varistors (MOVs) that are designed to be
operated continuously across AC power lines. These UL
recognized varistors require very little mounting space,
and are offered in various standard lead form options.
The LA Series varistors are available in four model
sizes: 7mm, 10mm, 14mm and 20mm; and have a
VM(AC)RMS voltage range from 130V to 1000V, and an
energy absorption capability up to 360J. Some LA Series
model numbers are available with clamping voltage
selections, designated by a model number suffix of
either A or B. The 'A' selection is the standard model;
the 'B' selection provides a lower clamping voltage.
See LA Series Device Ratings and Specifications
Table for part number and brand information.
Agency Approvals
Agency
Agency File Number
E320116, E56529, E135010
• Lead–free, HalogenFree and RoHS
compliant.
LR91788
42201-006
•
Energy absorption
capability (WTM)
up to 360J
•
Wide operating
voltage range
VM(AC)RMS 130V to 1000V
•
No derating up to
85ºC ambient
•
Available in tape and
reel or bulk pack
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
LA Series
Units
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS)
130 to 1000
V
DC Voltage Range (VM(DC))
175 to 1200
V
1200 to 6500
A
Transients:
Peak Pulse Current (ITM)
For 8/20μs Current Wave (See Figure 2)
Single Pulse Energy Range
For 10/1000μs Current Wave (WTM)
11 to 360
J
Operating Ambient Temperature Range (TA)
-55 to +85
O
Storage Temperature Range (TSTG)
-55 to +125
O
C
C
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
<0.01
%/OC
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301)
2500
V
COATING Insulation Resistance
1000
MΩ
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only
rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is
not implied.
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010
LA Series
Features
116895
Varistor Products
Radial Lead Varistors > LA Series
LA Series Ratings & Specifications
Maximum Rating (85°C)
Continuous
Transient
Part
Number
V130LA1P
V130LA2P
V130LA5P
V130LA10AP
V130LA20AP
V130LA20BP
V140LA2P
V140LA5P
V140LA10AP
V140LA20AP
V150LA1P
V150LA2P
V150LA5P
V150LA10AP
V150LA20AP
V150LA20BP
V175LA2P
V175LA5P
V175LA10AP
V175LA20AP
V230LA4P
V230LA10P
V230LA20AP
V230LA40AP
V250LA2P
V250LA4P
V250LA10P
V250LA20AP
V250LA40AP
V250LA40BP
V275LA2P
V275LA4P
V275LA10P
V275LA20AP
V275LA40AP
V275LA40BP
V300LA2P
V300LA4P
V300LA10P
V300LA20AP
V300LA40AP
V320LA7P
V320LA10P
V320LA20AP
V320LA40BP
V385LA7P
V385LA10P
V385LA20AP
Branding
P1301
P1302
P1305
P130L10
P130L20
P130L20B
P1402
P1405
P140L10
P140L20
P1501
P1502
P1505
P150L10
P150L20
P150L20B
P1752
P1755
P175L10
P175L20
P2304
P230L
P230L20
P230L40
P2502
P2504
P250L
P250L20
P250L40
P250L40B
P2752
P2754
P275L
P275L20
P275L40
P275L40B
P3002
P3004
P300L
P300L20
P300L40
P3207
P320L
P320L20
P320L40
P3857
P385L
P385L20
Model Size
Disc Dia.
(mm)
7
7
10
14
20
20
7
10
14
20
7
7
10
14
20
20
7
10
14
20
7
10
14
20
7
7
10
14
20
20
7
7
10
14
20
20
7
7
10
14
20
7
10
14
20
7
10
14
Peak
Energy 10
Current 8
x 1000μs
x 20μs
VRMS
VDC
VM(AC)
VM(DC)
WTM
ITM
(V)
130
130
130
130
130
130
140
140
140
140
150
150
150
150
150
150
175
175
175
175
230
230
230
230
250
250
250
250
250
250
275
275
275
275
275
275
300
300
300
300
300
320
320
320
320
385
385
385
(V)
175
175
175
175
175
175
180
180
180
180
200
200
200
200
200
200
225
225
225
225
300
300
300
300
330
330
330
330
330
330
369
369
369
369
369
369
405
405
405
405
405
420
420
420
420
505
505
505
(J)
11
11
20
38
70
70
12
22
42
75
13
13
25
45
80
80
15
30
55
90
20
35
70
122
21
21
40
72
130
130
23
23
45
75
140
140
25
25
46
77
165
25
48
80
150
27
51
85
(A)
1200
1200
2500
4500
6500
6500
1200
2500
4500
6500
1200
1200
2500
4500
6500
6500
1200
2500
4500
6500
1200
2500
4500
6500
1200
1200
2500
4500
6500
6500
1200
1200
2500
4500
6500
6500
1200
1200
2500
4500
6500
1200
2500
4500
6500
1200
2500
4500
Specifications (25°C)
Varistor
Maximum
Typical
Voltage at
Clamping
Capaci1mA
Voltage
tance f =
DC Test
8 x 20 μs
1MHz
Current
VNOM VNOM
VC
IPK
C
Min
Max
(V)
(V)
(V)
(A)
(pF)
184
255
390
10
180
184
228
340
10
180
184
228
340
25
450
184
228
340
50
1000
184
228
340
100
1900
184
220
325
100
1900
198
242
360
10
160
198
242
360
25
400
198
242
360
50
900
198
242
340
100
1750
212
284
430
10
150
212
268
395
10
150
212
268
395
25
360
212
268
395
50
800
212
268
395
100
1600
212
243
360
100
1600
247
303
455
10
130
247
303
455
25
350
247
303
455
50
700
247
303
455
100
1400
324
396
595
10
100
324
396
595
25
250
324
396
595
50
550
324
396
595
100
1100
354
473
730
10
90
354
429
650
10
90
354
429
650
25
220
354
429
650
50
500
354
429
650
100
1000
354
413
620
100
1000
389
515
775
10
80
389
473
710
10
80
389
473
710
25
200
389
473
710
50
450
389
473
710
100
900
389
453
680
100
900
420
565
870
10
70
420
517
775
10
70
420
517
775
25
180
420
517
775
50
400
420
517
775
100
800
462
565
850
10
65
462
565
850
25
170
462
565
850
50
380
462
540
810
100
750
558
682
1025
10
60
558
682
1025
25
160
558
682
1025
50
360
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Maximum Rating (85°C)
Continuous
Transient
Part
Number
Branding
Model Size
Disc Dia.
(mm)
Peak
Energy 10
Current 8
x 1000μs
x 20μs
VRMS
VDC
VM(AC)
VM(DC)
WTM
ITM
(A)
6500
1200
2500
4500
6500
1200
2500
4500
6500
1200
2500
4500
6500
2500
4500
6500
2500
4500
6500
2500
4500
6500
2500
4500
Specifications (25°C)
Varistor
Maximum
Typical
Voltage at
Clamping
Capaci1mA
Voltage
tance f =
DC Test
8 x 20 μs
1MHz
Current
VNOM VNOM
VC
IPK
C
Min
Max
(V)
(V)
(V)
(A)
(pF)
558
682
1025 100
700
610
748
1120
10
55
610
748
1120
25
140
610
748
1120
50
300
610
720
1060 100
600
640
790
1190
10
55
640
790
1190
25
120
640
790
1190
50
280
640
756
1110 100
560
670
825
1240
10
50
670
825
1240
25
120
670
825
1240
50
270
670
790
1160 100
550
735
910
1350
25
100
735
910
1350
50
250
735
860
1280 100
500
805
1000 1500
25
90
805
1000 1500
50
220
805
960
1410 100
450
900
1100 1650
25
80
900
1100 1650
50
210
900
1100 1650 100
425
990
1240 1875
25
65
990
1240 1875
50
190
V385LA40BP
V420LA7P
V420LA10P
V420LA20AP
V420LA40BP
V460LA7P
V460LA10P
V460LA20AP
V460LA40BP
V480LA7P
V480LA10P
V480LA40AP
V480LA80BP
V510LA10P
V510LA40AP
V510LA80BP
V575LA10P
V575LA40AP
V575LA80BP
V625LA10P
V625LA40AP
V625LA80BP
V680LA10P
V680LA80AP
P385L40
P4207
P420L
P420L20
P420L40
P4607
P460L
P460L20
P460L40
P4807
P480L
P480L40
P480L80
P510L
P510L40
P510L80
P575L
P575L40
P575L80
P625L
P625L40
P625L80
P680L
P680L80
20
7
10
14
20
7
10
14
20
7
10
14
20
10
14
20
10
14
20
10
14
20
10
14
(V)
385
420
420
420
420
460
460
460
460
480
480
480
480
510
510
510
575
575
575
625
625
625
680
680
(V)
505
560
560
560
560
615
615
615
615
640
640
640
640
675
675
675
730
730
730
825
825
825
875
875
(J)
160
30
55
90
160
37
56
100
170
35
60
105
180
63
110
190
65
120
220
67
125
230
75
145
V680LA100BP
P680L100
20
680
875
260
6500
990
1130
1700
100
380
V660LA10P
V660LA50AP
V660LA100BP
V1000LA80AP
V1000LA160BP
P660L
P660L50
P660L100
P1000L8
P1000L16
10
14
20
14
20
660
660
660
1000
1000
850
850
850
1200
1200
70
140
250
220
360
2500
4500
6500
4500
6500
940
940
940
1425
1425
1210
1210
1100
1800
1600
1820
1820
1650
2700
2420
25
50
100
50
100
70
200
400
130
250
NOTE: Average power dissipation of transients not to exceed 0.25W, 0.4W, 0.6W or 1W for model sizes 7mm, 10mm, 14mm and 20mm, respectively.
Phenolic Coating Option -- LA Series Varistors for Hi-Temperature Operating Conditions:
•
Phenolic–coated LA Series devices are available with improved maximum operating maximum temperature 125°C.
•
These devices also have improved temperature cycling performance capability.
•
Ratings and Specifications are as per standard LA Series except Hi–Pot Encapsulation (Isolation Voltage Capability) = 500V.
•
These devices are not UL, CSA, VDE or CECC certified.
•
To order: add X1347 to end of part number (e.g. V230LA20APX1347)
•
Product Marking:
LF 9
P175P10
Lead-Free,
YYWW
Halogen-Free
& RoHS Compliant
Indicator
Pholenic Coated
Option
Identifier
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010
LA Series
LA Series Ratings & Specifications (Continued...)
Varistor Products
Radial Lead Varistors > LA Series
Peak Pulse Current Test Waveform
Power Dissipation Ratings
PERCENT OF PEAK VALUE
Should transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown on the
Device Ratings and Specifications Table for the specific
device.The operating values of a MOV need to be derated
at high temperatures as shown in the diagram below.
Because varistors only dissipate a relatively small amount
of average power they are not suitable for repetitive
applications that involve substantial amounts of average
power dissipation.
100
90
50
10
O1
Current Energy and Power Derating Curve
TIME
T1
Figure 2
T2
01 = Virtual Origin of Wave
T = Time from 10% to 90% of Peak
T1 = Rise Time = 1.25 x T
T2 = Decay Time
Example - For an 8/20 μs Current Waveform:
8μs = T1 = Rise Time
20μs = T2 = Decay Time
100
PERCENT OF RATED VALUE
T
90
80
70
60
50
40
30
20
10
0
-55
50
60
70
80
90
100
110
120
AMBIENT TEMPERATURE ( oC)
130
140 150
Figure 1
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Transient V-I Characteristics Curves
Pulse Rating Curves
Maximum Clamping Voltage for 7mm Parts
Repetitive Surge Capability for 7mm Parts
V130LA1(P) - V480LA7(P)
V130LA1(P) - V300LA2(P)
6,000
5,000
V275LA2(P)
V250LA2(P)
V300LA2(P)
300
10 -2
10 2
100
50
20
10
INDEFINITE
2
V130LA1(P)
200
10 -3
10 3
10 4
10 5
10 6
10
200
5
V150LA1(P)
MODEL SIZE 7mm
V130LA1(P) - V480LA7(P)
2
500
2,000
1,000
900
800
700
600
500
400
1
1,000
SURGE CURRENT (A)
3,000
MAXIMUM PEAK VOLTS (V)
2,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300VM(AC) RATING
TA = -55o C TO 85o C
4,000
10 -1
Figure 3
10 0
10 1
10 2
PEAK AMPERES (A)
10 3
10 4
1
20
Figure 4
100
1,000
IMPULSE DURATION ( μs)
10,000
V130LA2(P) - V300LA4(P)
4,000
MAXIMUM PEAK VOLTS (V)
2,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
130 TO 300VM(AC) RATING
TA = -55o C TO 85o C
V300LA4(P)
V275LA4(P)
V250LA4(P)
V230LA4(P)
LA Series
3,000
1,000
900
800
700
600
500
400
300
V175LA2(P)
V150LA2(P)
V140LA2(P)
V130LA2(P)
200
100
10 -3
10 -2
10 -1
Figure 5
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
10 4
MAXIMUM PEAK VOLTS (V)
V320LA7(P) - V480LA7(P)
MAXIMUM CLAMPING VOLTAGE
5,000 MODEL SIZE 7mm
320 TO 480VM(AC) RATING
TA = -55o C TO 85o C
3,000
V460LA7(P)
V480LA7(P)
2,000
1,000
V420LA7(P)
V385LA7(P)
V320LA7(P)
500
Figure 6
10 -3
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
10 4
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010
Varistor Products
Radial Lead Varistors > LA Series
Transient V-I Characteristics Curves (Continued...)
Pulse Rating Curves (Continued...)
Maximum Clamping Voltage for 10mm Parts
Repetitive Surge Capability for 10mm Parts
V130LA5(P) - V420LA10(P)
6,000
5,000
2,000
1,000
V275LA10(P)
V250LA10(P)
V230LA10(P)
V420LA10(P)
V175LA5(P)
500
10 -2
Figure 7
10 0
10 1
10 2
PEAK AMPERES (A)
10 3
10 4
10 2 3
10
10 4
10 5
10 6
10
100
50
20
10
10 -1
2
200
V150LA5(P)
V140LA5(P)
V130LA5(P)
300
200
10 -3
MODEL SIZE 10mm
V130LA5(P) - V680LA10(P)
1
2,000
SURGE CURRENT (A)
3,000
1,000
900
800
700
600
500
400
5,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
130 TO 420VM(AC) RATING
TA = -55o C TO 85o C
4,000
MAXIMUM PEAK VOLTS (V)
V130LA5(P) - V680LA10(P)
INDEFINITE
5
2
20
Figure 8
100
1,000
IMPULSE DURATION ( μs)
10,000
MAXIMUM PEAK VOLTS (V)
V300LA10(P) - V680LA10(P)
MAXIMUM CLAMPING VOLTAGE
5,000 MODEL SIZE 10mm
300 TO 680VM(AC) RATING
TA = -55o C TO 85o C
3,000
2,000
V680LA10(P)
V625LA10(P)
V660LA10(P)
V300LA10(P)
V320LA10(P)
1,000
500
Figure 9
V575LA10(P)
V510LA10(P)
V480LA10(P)/
V460LA10(P)
V385LA10(P)
10 -3
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
10 4
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Transient V-I Characteristics Curves (Continued...)
Pulse Rating Curves (Continued...)
Maximum Clamping Voltage for 14mm Parts
Repetitive Surge Capability for 14mm Parts
V130LA10A(P) - V320LA20A
V130LA10A(P) - V320LA20A(P)
2,000
V300LA20A(P)
V320LA20A(P)
V275LA20A(P)
V250LA20A(P)
V230LA20A(P)
10
10 -2
10 -1
10 0
10 1
10 2
PEAK AMPERES (A)
10 3
100
50
20
Figure 12
10-3
2
20
100
1,000
IMPULSE DURATION ( μs)
5,000
1
V1000LA80A(P)
10-2 10-1 100
101
PEAK AMPERES (A)
102
103
2,000
2
1,000
10
SURGE CURRENT (A)
V680LA80A(P)
V575LA40A(P)
V510LA40A(P)
V480LA40A(P)/V460LA20A(P)
V420LA20A(P)
V385LA20A(P)
10-4
5
10,000
V385LA20A(P) - V1000LA80A(P)
1,000
500
INDEFINITE
Figure 11
V660LA50A(P)
2,000 V625LA40A(P)
700
10 2 3
10
10 4
10 5
10 6
200
10 4
V385LA20A(P) V1000LA80A(P)
5,000 MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 14mm
385 TO 1000VM(AC) RATING
TA = -55o C TO 85o C
3,000
MODEL SIZE 14mm
V130LA10A(P) - V320LA20A(P)
500
V150LA10A(P)
V140LA10A(P)
V130LA10A(P)
Figure 10
MAXIMUM PEAK VOLTS (V)
1,000
10
300
300
2
V175LA10A(P)
200
10 -3
1
2,000
10 2 3
10
10 4
10 5
10 6
500
200
100
50
20
10
INDEFINITE
5
2
20
104
Figure 13
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
MODEL SIZE 14mm
V385LA20A(P) - V1000LA80A(P)
LA Series
3,000
1,000
900
800
700
600
500
400
5,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 14mm
130 TO 320VM(AC) RATING
TA = -55o C TO 85o C
SURGE CURRENT (A)
MAXIMUM PEAK VOLTS (V)
6,000
5,000
4,000
100
1,000
IMPULSE DURATION ( μs)
10,000
LA Varistor Series
Revision: August 4, 2010
Varistor Products
Radial Lead Varistors > LA Series
Transient V-I Characteristics Curves (Continued...)
Pulse Rating Curves (Continued...)
Maximum Clamping Voltage for 20mm Parts
V130LA20A(P) - V275LA40A(P)
V300LA40A - V1000LA160B
5,000
3,000
MAXIMUM PEAK VOLTS (V)
2,000
1,000
900
800
700
600
500
V275LA40A(P)
V250LA40A(P)
400
300
MAXIMUM PEAK VOLTS (V)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
130 TO 275VM(AC) RATING
TA = -55o C TO 85o C
V175LA20A(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
300 TO 1000VM(AC) RATING
TA = -55o C TO 85o C
3,000
V1000LA160B(P)
V680LA100B(P)
V625LA80B(P)
V660LA100B(P)
2,000
V575LA80B(P)
V510LA80B(P)
V480LA80B(P)/
V460LA40B(P)
1,000
V420LA40B(P)
V385LA40B(P)
V320LA40B(P)
V300LA40A(P)
V150LA20A(P)
V130LA20A(P)
500
200
10-3
10-2
10-1
Figure 14
100
101
102
PEAK AMPERES (A)
103
10-3
104
10-2
10-1
100
101
102
PEAK AMPERES (A)
Figure 15
103
104
V130LA20B(P) - V275LA40(P)
Repetitive Surge Capability for 20mm Parts
3,000
V130LA20A(P) - V320LA40B(P)
10,000
1
5,000
1,000
900
800
700
600
500
400
300
2
10
2,000
SURGE CURRENT (A)
MAXIMUM PEAK VOLTS (V)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
2,000 130 TO 275VM(AC) RATING
TA = -55o C TO 85o C
V275LA40B(P)
V250LA40B(P)
V150LA20B(P)
V130LA20B(P)
200
10-3
10-2
10-1
100
101
102
PEAK AMPERES (A)
Figure 16
103
1,000
500
MODEL SIZE 20mm
V130LA20A(P) - V320LA40B(P)
10 2 3
10
10 4
10 5
10 6
200
100
50
20
INDEFINITE
10
5
104
2
1
V130LA20A(P) - V275LA40A(P)
20
100
Figure 18
1,000
IMPULSE DURATION (μs)
10,000
3,000
V385LA40B(P) - V1000LA160B(P)
10,000
1
5,000
2
10
2,000
1,000
V230LA40A(P)
500
V140LA20A(P)
300
200
Figure 17
10-3
10-2
10-1
100
101
102
PEAK AMPERES (A)
103
SURGE CURRENT (A)
MAXIMUM PEAKVOLTS (V)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
M(AC) RATING
2,000 140 TO 230V
TA = -55o C TO 85o C
1,000
500
MODEL SIZE 20mm
V385LA40B(P) - V1000LA160B(P)
10 2 3
10
10 4
10 5
10 6
200
100
50
20
INDEFINITE
10
5
104
2
1
20
Figure 19
100
1,000
IMPULSE DURATION ( μs)
10,000
NOTE: If pulse ratings are exceeded, a shift of VN(DC) (at specified current) of more than +/-10% could result. This type of shift, which normally results in a decrease of VN(DC), may result in the
device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection.
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Wave Solder Profile
Non Lead–free Profile
Lead–free Profile
300
300
250
TEMPERATURE (ºC)
250
200
150
100
50
200
150
100
50
0
0
0
0.5
1
Figure 20
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
Figure 21
TIME(MINUTES)
2
2.5
3
3.5
4
TIME(MINUTES)
Physical Specifications
Environmental Specifications
Lead Material
Tin–Coated Copper Wire
Operating Ambient
Temperature Range
-55°C to +85°C
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208E
Storage Temperature Range
-55°C to +125°C
Insulating Material
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Humidity Aging
+85°C, 85% RH, 1000 hours
+/-10% typical voltage change
Device Labeling
Marked with LF, voltage, UL/CSA logos,
and date code
Thermal Shock
+85°C to -40°C 5 times
+/-10% typical voltage change
Solvent Resistance
MIL–STD–202, Method 215F
Moisture Sensitivity
Level 1, J–STD–020C
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010
LA Series
TEMPERATURE (ºC)
Maximum Wave 260C
Maximum Wave 240C
Varistor Products
Radial Lead Varistors > LA Series
Product Dimensions (mm)
*SEATING
PLANE
ATRIM
LTRIM
CRIMPED AND TRIMMED LEAD
Crimped leads are standard on LA types supplied in tape and reel
and are denoted by the model letter "T." Model letter "S" denotes
straight leads and letter "U" denotes special under-crimped leads.
*Seating plane interpretation per IEC-717
Dimension
A
ØD
e
e1
E
7mm Size
10mm Size
14mm Size
20mm Size
VRMS
Voltage
Model
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
V130LA-
-
12
-
16
-
20
-
26.5
(1.043)
V320LA
-
(0.472)
-
(0.630)
-
(0.787)
-
V385LA-
-
13
-
17
-
20.5
-
28
V1000LA
-
(0.0512)
-
(0.689)
-
(0.807)
-
(1.102)
All
-
9 (0.354)
-
12.5 (0.492)
-
17 (0.669)
-
23 (0.906)
8.5 (0.335)
6.5 (0.256)
(Note 2)
8.5
(Note 2)
All
4 (0.157)
6 (0.236)
6.5 (0.256)
8.5 (0.335)
6.5 (0.256)
V130LA-
1.5
3.5
1.5
3.5
1.5
3.5
1.5
3.5
V320LA
(0.059)
(0.138)
(0.059)
(0.138)
(0.059)
(0.138)
(0.059)
(0.138)
V385LA-
2.5
5.5
2.5
5.5
2.5
5.5
2.5
5.5
V1000LA
(0.098)
(0.217)
(0.098)
(0.217)
(0.098)
(0.217)
(0.098)
(0.217)
V130LA-
-
5.6
-
5.6
-
5.6
-
5.6
V320LA
-
(0.220)
-
(0.220)
-
(0.220)
-
(0.220)
V385LA-
-
7.3
-
7.3
-
7.3
-
7.3
V510LA
-
(0.287)
-
(0.287)
-
(0.287)
-
(0.287)
V550LA-
-
8.3
-
8.3
-
8.3
-
8.3
V680LA
-
(0.327)
-
(0.327)
-
(0.327)
-
(0.327)
-
-
-
10.8 (0.425)
-
10.8 (0.425)
0.86 (0.034)
0.76 (0.030)
(Note 2)
0.86 (0.034)
(Note 2)
-
29.0 (1.142)
2.41 (0.095)
4.69 (0.185)
V1000LA
-
-
Øb
All
(Note 3)
0.585
(0.023)
0.685
(0.027)
0.76 (0.030)
0.86 (0.034)
0.76 (0.030)
ATRIM
All
-
15 (0.591)
-
19.5 (0.768)
-
LTRIM
All
2.41 (0.095)
4.69 (0.185)
2.41 (0.095)
4.69 (0.185)
2.41 (0.095)
22.5 (0.886)
(NOTE 4)
4.69 (0.185)
Notes :
1. Dimensions in millimeters, (inches) in parentheses.
2. 10mm (9mm Min. & 11mm Max.) ALSO AVAILABLE; see additional lead style options
3. 1000V parts supplied with lead wire of diameter 1.00 -/+ 0.05 (0.039 -/+ 0.002)
4. 'A' Max. for V1000LC80A (P) = 24.00 (0.945”)
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Tape and Reel Specifications
(Dimensions presented on following page.)
7mm Devices
10, 14 and 20mm Devices
CRIMPED LEADS "LT"
CRIMPED LEADS "LT"
P
P2
P2
E
DP
DH
DH
C
SEATING
PLANE
H1
W0
H0
DP
DH
C
SEATING
PLANE
E
DP
DH
W0 W2 W1
W2 W1
Db
H0
Db
W
W
DD0
DD0
P1
P1
t
F
P0
STRAIGHT LEADS "LS"
P
P2
t
F
P1
STRAIGHT LEADS "LS"
P
P2
E
DP
E
DP
DP
DP
DH
DH
DH
DH
LA Series
H1
P
DP
H1
H1
W0 W2 W1
H
W0 W2 W1
H
Db
Db
W
W
DD0
DD0
P1
P1
t
F
t
F
P0
P0
UNDER-CRIMPED LEADS "LU"
P
P2
UNDER-CRIMPED LEADS "LU"
E
DP
P2
E
DP
DP
DH
DH
DH
DH
U
H1
U
H1
W0 W2 W1
Ho
P
DP
W0 W2 W1
Ho
Db
Db
W
W
DD0
DD0
P1
F
t
P1
F
t
P0
P0
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010
Varistor Products
Radial Lead Varistors > LA Series
Tape and Reel Specifications (continued)
•
•
•
•
•
•
Conforms to ANSI and EIA specifications
Can be supplied to IEC Publication 286-2
Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
7mm parts are available on tape and reel up to 480 VAC only
10mm parts are available on tape and reel up to 510 VAC only
14mm and 20mm parts are available on tape and reel up to 550 VAC only
Symbol
Model Size
Description
P
Pitch of Component
7mm
10mm
14mm
20mm
12.7 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
P0
Feed Hole Pitch
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
P1
Feed Hole Center to Pitch
3.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
P2
Hole Center to Component Center
6.35 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
F
Lead to Lead Distance
5.0 +/- 0.8
7.5 +/-0.8
7.5 +/- 0.8
7.5 +/- 0.8
h
Component Alignment
W
Tape Width
W0
Hold Down Tape Width
W1
Hole Position
W2
Hold Down Tape Position
2.0 Max
2.0 Max
2.0 Max
2.0 Max
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
9.0 +0.75 / -0.50
0.5 Max
0.5 Max
0.5 Max
0.5 Max
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
H
Height from Tape Center to
Component Base
H0
Seating Plane Height
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
H1
Component Height
32.0 Max
36.0 Max
40.0 Max
46.5 Max
D0
Feed Hole Diameter
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
T
Total Tape Thickness
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
U
Under-crimp Width
P
Component Alignment
8.0 Max
8.0 Max
8.0 Max
8.0 Max
3° Max 1.00mm
3° Max 1.00mm
3° Max 1.00mm
3° Max
NOTE: Dimensions are in mm.
Standard Bulk Pack Quantity
Standard Bulk Pack Quantity
Varistor Voltage Model
130-275
Varistor Model Size
7mm
10mm
14mm
20mm
1500
1000
700
500
300-460
1500
1000
600
400
510-625
1500
1000
500
400
660
N/A
1000
500
400
680
N/A
1000
400
300
1000
N/A
N/A
300
200
©2010 Littelfuse, Inc.
LA Varistor Series
Revision: August 4, 2010
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Varistor Products
Radial Lead Varistors > LA Series
Part Numbering System
OPTION CODES
BASE PART CODES
(See notes below)
(See Ratings & Specifications tables and notes below)
V XXXX LA XX X P
XXXXX
See OPTIONS CODES notes below
For “VARISTOR”
V M(AC)
(Three or four digits -- 130V to 1,000V)
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
(See BASE PART CODES notes below)
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Tape and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
CLAMP VOLTAGE VARIANT
(One digit, where applicable)
LA Series
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
Ordering Notes:
BASE PART CODES:
OPTION CODES:
Series + Packaging / Lead Style Designators:
X10: 10mm lead spacing option --
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
Straight
Lead
Tape &
Reel
Crimped
Lead
Tape &
Reel
Crimped &
Trimmed
Lead
Bulk Pack
UnderCrimp
Lead
Tape &
Reel
V130LA2P
V130LS2P
V130LT2P
V130LC2P
V130LU2P
For 10 (-/+1) mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Standard Model
Order As
V130LA20AP
V130LA20APX10
X2855: Nickel Barrier coated wire option -Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT." For crimped leads without
trimming and any varitions other than that described above,
please contact Littelfuse.
Littelfuse LA Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet. Contact your Littelfuse
sales representative to discuss non-standard options.
All standard parts use Tin–coated Copper wire. Nickel
Barrier coated wire is available as an option, consisting
of Copper wire with a flashing of Nickel followed by
a top coating of Tin. To order append standard model
BASE PART number with "X2855." Example:
Standard Model
Order As
V130LA20AP
V130LA20APX2855
X1347: Hi-Temperature phenolic coating option -Phenolic Coated LA Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V230LA20APX1347).
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
LA Varistor Series
Revision: August 4, 2010