1201161 Si114x A11 transition std

Process Change Notice #1201161
____________________________________________________________________________________________________
User Registration
Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document
updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content
available only to registered users. http://www.silabs.com/profile
PCN Date: 16Jan12
Effective Date: 20Apr12
Title: Si114x transition from A10 to A11
Originator: Ahsan Javed
Phone: 512-532-5841
Dept: Broadcast
Customer Contact: Kathy Haggar
Phone: 512-532-5261
Dept: Sales / Customer Service
PCN Type:
Assembly
Discontinuance
Package
Datasheet
Fabrication
Product Revision
Packing
Labeling
Location
Test
Other
Last Order Date: 20Apr12
PCN Details
Description of Change:
Silicon Labs is pleased to announce the availability of the Si114x-A11-GMR product which
extends the dynamic range of the internal ADC.
The Si114x-A10-GMR devices are being replaced by the Si114x-A11-GMR products. Silicon Labs
recommends new designs use the A11 devices. The silicon, package, footprint, and pin out
remain unchanged for the A11 devices.
Reason for Change:
The Si114x-A11-GMR extends the usable range of the internal ADC of the device through
extended operation of the internal ADC over-range flag.
Impact on Form, Fit, Function, Quality, Reliability:
The Si114x-A11-GMR products is a pin compatible replacement for the Si114x-A10-GMR devices.
There are no form, fit, quality, and reliability impact; however, customers utilizing threshold
register settings may be impacted. Threshold registers ALS_LOW_TH, ALS_HI_TH, PS1_TH,
PS2_TH and PS3_TH were changed from compressed 8-bit format to uncompressed 16-bit
format for improved resolution. Refer to product data sheet revision 1.2 or later for details.
Product Identification:
This PCN applies to devices ordered using the following ordering part numbers:
-
Old: Si1141-A10-GMR
New: Si1141-A11-GMR
-
Old: Si1142-A10-GMR
New: Si1142-A11-GMR
-
Old: Si1143-A10-GMR
New: Si1143-A11-GMR
Last Date of Unchanged Product: 20Apr12
Subsequent to the Effective Date of this PCN, Silicon Labs will begin using only the new ordering
part numbers. Customers using the current ordering part number should transition to the new
ordering part number prior to the Effective Date.
W7206F1 Process Change Notice Form rev AA
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 1
Process Change Notice #1201171
____________________________________________________________________________________________________
Qualification Samples:
Available upon request. Please contact your local Silicon Laboratories sales representative to
order samples. A list of Silicon Laboratories sales representatives may be found at
www.silabs.com
Customer Early Acceptance Sign Off:
Customers may approve early PCN acceptance by completing the information below:
Early Acceptance Date:
Name:
Company:
Email your early Acceptance approval to: [email protected]
Qualification Data: Not applicable.
W7206F1 Process Change Notice Form rev AA
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 2