BL081 5-4000 MHz Wideband Low Noise Amplifier Device Features NF = 0.95 dB @ 900MHz at RF connectors of Demo board Gain = 20.5 dB @ 900 MHz OIP3 = 30.0 dBm @ 1900MHz Output P1 dB = 17.5 dBm @ 900MHz 5V/27mA, MTTF > 100 Years, MSL 1, Class 0 Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Product Description BeRex’s BL081 is a high performance LNA based on GaAs material with E-pHEMT process, packaged in a RoHS-compliant with SOT89 surface mount package. It is designed for use where low noise and high linearity are required and features low noise and high OIP3 with low current at wideband frequency. It requires a few external matching components. All devices are 100% RF/DC tested and classified as HBM ESDS Class 0. Applications Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Parameter Frequency Unit 900 1900 2140 2450 3500 MHz Gain 20.5 17.0 16.0 15.5 13.4 dB S11 -20.0 -20.0 -20.0 -21.0 -18.3 dB -22.0 -17.0 -17.0 -17.0 -12.1 dB OIP3 28.5 30.0 30.0 30.0 31.1 dBm P1dB Noise Figure 17.5 0.95 17.5 1.13 17.5 1.15 17.5 1.25 18.5 1.4 dBm dB S22 2 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 5 dBm per tone separated by 1 MHz. Bandwidth IC @ (Vc = 5V) VC RTH Min. 5 15 Typical 27 5.0 63 Max. 4000 35 Unit MHz mA V °C/W Absolute Maximum Ratings Applications Circuit Vcc Bypass RF Choke RF In RF Out BL081 DC Block DC Block Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +6.0 160 30 Unit °C °C °C V mA dBm Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 4 to 12. BeRex ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier V-I Characteristics BeRex SOT89 Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vd=5V, Id=25mA, T=25°C) BeRex ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier S-Parameter (Vdevice = 5.0V, Icc = 25mA, T = 25 °C, calibrated to device leads) BeRex Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 0.637 0.678 0.589 0.513 0.429 0.371 0.280 0.205 -10.630 -53.138 -82.755 -117.379 -139.689 -160.253 179.851 164.524 12.304 10.733 8.815 7.781 6.261 4.886 4.870 4.016 172.181 148.743 126.435 105.710 82.420 74.655 63.131 47.709 0.032 0.033 0.035 0.039 0.041 0.046 0.051 0.056 12.944 10.572 17.891 22.555 23.205 29.503 27.793 27.902 0.569 0.558 0.554 0.553 0.555 0.563 0.558 0.554 -8.574 -21.318 -41.116 -60.200 -78.933 -96.918 -114.110 -133.482 4000 0.107 144.464 3.553 41.113 0.061 27.767 0.567 -153.176 ●website: www.berex.com ●email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Application Circuit: 900 MHz Schematic Diagram BOM Vdd C3 C2 C1 L1 Input BL081 C4 Output L2 L3 C5 C6 Tolerance C1 10uF ± 20% C2 1nF ± 5% C3 100pF ±5% C4 100pF ±5% C5 100pF ±5% C6 0.5pF ± 5% L1 100nH ±5% L2 8.2nH ±5% L3 10nH ±5% Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Noise Figure Temperature Performance (Vds = 5.0V, Ids = 25.0mA) Freq Temp [°C] BeRex MHz 900 1900 2140 2450 -40 0.78 0.96 0.98 0.92 25 0.98 1.25 1.18 1.16 85 1.12 1.45 1.48 1.45 ●website: www.berex.com ●email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Application Circuit: 1900 MHz Schematic Diagram BOM Tolerance C1 10uF ± 20% C2 1nF ± 5% C3 100pF ±5% C4 100pF ± 5% C5 100pF ± 5% C6 0.75pF ± 5% L1 18nH ±5% L2 2.7nH ±5% L3 2.7nH ±5% Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Noise Figure Temperature Performance (Vds = 5.0V, Ids = 25.0mA) Freq Temp [°C] BeRex MHz 900 1900 2140 2450 -40 0.78 0.96 0.98 0.92 25 0.98 1.25 1.18 1.16 85 1.12 1.45 1.48 1.45 ●website: www.berex.com ●email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Application Circuit: 2140 MHz Schematic Diagram BOM Tolerance C1 10uF ± 20% C2 1000pF ± 5% C3 100pF ±5% C4 18pF ± 5% C5 18pF ± 5% C6 0.75pF ± 5% C7 0.5pF ±5% L1 33nH ±5% L2 1.5nH ±5% L3 4.7nH ±5% Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Noise Figure Temperature Performance (Vds = 5.0V, Ids = 25.0mA) Freq Temp [°C] BeRex MHz 900 1900 2140 2450 -40 0.78 0.96 0.98 0.92 25 0.98 1.25 1.18 1.16 85 1.12 1.45 1.48 1.45 ●website: www.berex.com ●email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Application Circuit: 2450 MHz Schematic Diagram BOM Tolerance C1 10uF ± 20% C2 1000pF ± 5% C3 100pF ±5% C4 22pF ± 5% C5 22pF ± 5% C6 0.5pF ± 5% C7 1pF ±5% L1 47nH ±5% L2 1.8nH ±5% L3 3.9nH ±5% Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Noise Figure Temperature Performance (Vds = 5.0V, Ids = 25.0mA) Freq Temp [°C] BeRex MHz 900 1900 2140 2450 -40 0.78 0.96 0.98 0.92 25 0.98 1.25 1.18 1.16 85 1.12 1.45 1.48 1.45 ●website: www.berex.com ●email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E BL081 5-4000 MHz Wideband Low Noise Amplifier Package Marking Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 YY = Year, WW = Working Week, XX = Wafer No. Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 0 Value: Passes <200V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2015 BeRex Rev. E