MCU Quick-Start Guide Featuring the USB Debug Adapter

C8051F XXX DK D EVELOPMENT K IT Q UICK -S TA R T G U I D E
F OR K ITS F E AT U RI NG T H E USB D E BU G A D A P T E R
Installation
1
Connect USB Debug Adapter to Target
Board with JTAG/DEBUG cable
4
2
Connect USB cable to USB
Debug Adapter
Connect power supply
to Target Board
Note: Some Target Boards include options for
alternate power sources. See Development Kit
User's Guide for details.
6
Select “Install Development Tools”
from the introduction window and
follow the on-screen instructions
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Email: [email protected]
Internet: www.silabs.com
5
3
Connect USB cable to PC
Insert Development Kit CD in
CD-ROM Drive
Note: If autorun does not launch the
introduction window, run "SETUP.EXE" directly
from the CD.
From the Programs list in the
Start menu, select Silicon Laboratories
and click on the Silicon Laboratories IDE logo
7
Copyright © 2007 by Silicon Laboratories
8
Silicon Laboratories IDE opens
Rev. 0.5 1/08
Example Program
9
Open project file “<Family>_Blinky_C.wsp”
located at “C:\SiLabs\MCU\Examples\
<Family>\Blinky”
10
11
Connect to Target Board
Download
the program
14
Execute example program
Green LED on target board
flashes as program runs
Select “Connection Options…” from
“Options” menu
Select USB
Debug Adapter
Select Correct
Debug Interface
C8051F0xx
C8051F1xx
C8051F2xx
C8051F3xx
C8051F4xx
C8051F5xx
C8051F9xx
12
Click on “<Family>_Blinky.c”
to open source file
13
Build and
→
→
→
→
→
→
→
JTAG
JTAG
JTAG
C2
C2
C2
C2
15
Stop execution of
example program
16
Set a breakpoint
17
Execute program
breakpoint encountered
18
Step through program
19
Open Debug windows
20
View/modify Peripherals ,
Registers , Memory
If you are having trouble installing and/or using the development kit, please use the following support resources:
C8051Fxxx Development Kit User's Guide (click "Browse Documentation" from the CD introduction window)
Application Note “AN104: Integrating Keil 8051 Tools Into the Silicon Labs IDE"
(contains instructions for obtaining the 4 k limited version of the Keil toolset)
„ Latest versions of Application Notes can be found at http://www.silabs.com/products/microcontroller/applications.asp
„ MCU Knowledgebase (available at www.silabs.com → SUPPORT)
„ Contact an Applications Engineer using the online information request form (available at www.silabs.com → SUPPORT).
„
„
2
Rev. 0.5