S TEPPER M OTOR R EFERENCE D E S I G N Q U IC K - S TART G UIDE Connect Motor Wires. - Follow color wiring diagram. - Insert wires. - Tighten screw terminals. 1 Connect AC/DC adapter. 2 RS232 J1 Design Board Phase A+ Ac AB+ Bc B- P1 Color Red Yellow Blue Green Orange Brown Operate Motor. - Push function (FUNC) button. - Motor turns. - Push button again. - Motor turns reverse direction. 3 Stepper Motor Reference Design Board FUNC J3 Debug J1 Debug J3 Stepper Motor BBc B+ Stepper Motor AAc Reference A+ FUNC RS232 Stepper Motor P1 AC/DC Adapter 4 Browse Documentation. - Insert CD. - Click on Browse Documentation. RS232 Stepper Motor Stepper Motor Reference Design Board FUNC J1 Debug J3 P1 AC/DC Adapter Refer to the following documents included on the kit CD for further information: Stepper Motor Reference Design User's Guide AN155 – Stepper Motor Reference Design Silicon Laboratories Inc. 400 W Cesar Chavez Austin, TX 78701 Email: [email protected] Internet: www.silabs.com Copyright © 2006 by Silicon Laboratories Rev. 0.1 5/06