Revision Change Notice #1509222 ____________________________________________________________________________________________________ User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content available only to registered users. http://www.silabs.com/profile PCN Date: 9/11/2015 Effective Date: 9/11/2015 Title: EFM8BB2x Revision C Addendum to PCN 1508072 Originator: Kafai Leung Phone: 512-532-5232 Dept: Marketing Customer Contact: Kathy Haggar Phone: 512-532-5261 Dept: Sales PCN Type: ☒ Datasheet ☒ Product Revision PCN Details Description of Change: This PCN is issued as an Addendum to PCN 1508072: EFM8BB2x Revision C. In PCN 1508071 qualification data section, wrong MCU die part (C8051F870) was entered. This Addendum corrects the MCU die part to EFM8BB2x. Silicon Labs is pleased to announce revision C of the EFM8BB2x devices and revision 1.0 of the corresponding datasheet for these products. Revision C resolves the momentary current spike upon entering Shutdown mode. In addition, for customers using Revision B the change to Revision C eliminates a potential issue with the Timer 3/4 32-bit counter not switching to the low frequency oscillator (LFOSC0) after entering Suspend mode if the system clock divider is set to a value of divide-by-4 or greater. This revision allows system clock divider to be at any value when entering Suspend mode. Datasheet revision 1.0 updates the orderable part number to revision C along with other spec table edits in Port I/O spec in Figure 4.6 and Figure 4.7 together with Table 4.13. After the effective date of this PCN, Silicon Labs reserves the right to deliver (new product revision) for customers ordering (old product revision). Reason for Change: EFM8BB2x Revision C release EFM8BB2x Datasheet revision 1.0 release W7206F5 Product Revision Notice Form rev E The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 4 Revision Change Notice #1509222 ____________________________________________________________________________________________________ Impact on Form, Fit, Function, Quality, Reliability: There is no impact to form, fit, quality or reliability. The following functions are impacted: - The reset value of REVID SFR will read 0x03 for revision C instead of 0x02 for revision B or 0x01 for revision A. - Behavior with momentary current spike upon entering Shutdown mode has been addressed. - Behavior with Timer 3/4 at system when system clock divider value of divide-by-4 or greater has been addressed. Product Identification: Existing Part Number Replacement Part Number EFM8BB21F16G-B-QFN20 EFM8BB21F16G-B-QFN20R EFM8BB21F16G-B-QSOP24 EFM8BB21F16G-B-QSOP24R EFM8BB22F16G-B-QFN28 EFM8BB22F16G-B-QFN28R EFM8BB21F16G-C-QFN20 EFM8BB21F16G-C-QFN20R EFM8BB21F16G-C-QSOP24 EFM8BB21F16G-C-QSOP24R EFM8BB22F16G-C-QFN28 EFM8BB22F16G-C-QFN28R Drop in Compatible Indicator Yes Yes Yes Yes Yes Yes Note: The part numbers above include tape and reel variants which are denoted with an “R” at the end of the orderable part number. Last Date of Unchanged Product: 9/11/2015 Qualification Samples: Samples are available now. Please contact your Silicon Labs sales representative to order samples. A list of Silicon Labs sales representatives is available at www.silabs.com. Specific conditions of acceptance of this change will be considered on a case by case basis if written notice is submitted within 30 days of this notice. To request further data or inquire about this notification, please contact your local Silicon Labs sales representative. A list of Silicon Labs sales representatives is available at www.silabs.com. In some cases rejection of a change notice may impact Silicon Labs product pricing, delivery, quality, or reliability. Customer Early Acceptance Sign Off: Customers may approve early PCN acceptance by completing the information below: Early Acceptance: Date: Name: Company: Email your early Acceptance approval to: [email protected] Qualification Data: See below qualification report. W7206F5 Product Revision Notice Form rev E The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 5 Revision Change Notice #1509222 ____________________________________________________________________________________________________ W7206F5 Product Revision Notice Form rev E The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 6 Revision Change Notice #1509222 ____________________________________________________________________________________________________ W7206F5 Product Revision Notice Form rev E The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 7 Revision Change Notice #1509222 ____________________________________________________________________________________________________ W7206F5 Product Revision Notice Form rev E The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 8