OLED-100H016D www.vishay.com Vishay 100 x 16 Graphic OLED FEATURES • Type: Graphic • Display format: 100 x 16 dots • Built-in controller: OLED-0010 • Duty cycle: 1/16 • +5 V power supply, +3 V optional • Interface: 6800, option 8080 and SPI • Sunlight readable and polarizer optional • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA ITEM ABSOLUTE MAXIMUM RATINGS STANDARD VALUE Module dimension UNIT 85.0 x 30.0 x 10.0 (max.) Viewing area 66.0 x 16.0 Active area 59.95 x 11.15 Dot size 0.55 x 0.65 Dot pitch 0.60 x 0.70 Mounting hole 81.0 x 24.0 mm ITEM SYMBOL Supply voltage for logic STANDARD VALUE MIN. MAX. VDD to VSS -0.3 5.3 VI -0.3 VDD Input voltage UNIT V Note • VSS = 0 V, VDD = 3.0 V/5.0 V ELECTRICAL CHARACTERISTICS ITEM SYMBOL CONDITION Supply voltage for logic VDD to VSS VIH Input high voltage STANDARD VALUE MAX. UNIT MIN. TYP. - 3.0 5.0 5.3 V - 0.9 VDD - VDD V Input low voltage VIL - GND - 0.1 VDD V Output high voltage VOH IOH = 0.5 mA 0.8 VDD - VDD V Output low voltage VOL IOL = 0.5 mA GND - 0.2 VDD V Supply current IDD VDD = 5 V - 30 - mA OPTIONS EMITTING COLOR MOQ YELLOW GREEN RED BLUE WHITE YELLOW GREEN RED BLUE WHITE Y Y Y Y Y N Y Y Y Y Document Number: 37710 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 13-Feb-14 OLED-100H016D www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1 VDD Supply voltage for logic 2 VSS Ground 3 NC No connection 4 RS H: Data; L: Instruction code 5 R/W H: Read (MPU ← Module); L: Write (MPU → Module) H → L enable signal 6 E 7 DB0 Data bit 0 8 DB1 Data bit 1 9 DB2 Data bit 2 10 DB3 Data bit 3 11 DB4 Data bit 4 12 DB5 Data bit 5 13 DB6 Data bit 6 14 DB7 Data bit 7 DIMENSIONS in millimeters 85.0 0.5 71.2 66.0(VA) 59.95(AA) 14 5.1 100x16 Dots 2 1 14 13 2 1 14-Ø 1.0 PTH 14-Ø 1.8 PAD K 43.25 81.0 4-Ø 2.5 PTH 4-Ø 5.0 PAD PIN DETAIL 1.6 0.6 0.55 0.7 0.65 2.0 2.54 2.0 7.38 10.0Max 13 24.0 16.0(VA) 11.15(AA) 30.0 0.5 7.0 9.08 3.0 15.0 10.25 13.275 (P2.54*6) 15.24 7.65 SCALE 10/1 Document Number: 37710 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 13-Feb-14 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000