X

April 2004
HCCM484X / HCCM485X
Day-Night Camera
The new high resolution 1/3"
colour/monochrome camera is ideal for
applications where optimum 24 hour
surveillance is required. The camera provides
colour images during daylight hours and as light
levels reduce, the camera switches to
monochrome mode. Whilst in monochrome
mode, the IR-cut filter is removed from the light
path to the CCD, giving the camera greater
sensitivity in low light, with the added benefit
of being responsive to infra red illumination.
This range of high sensitivity cameras offer
features such as Digital Signal Processing
(DSP), Back Light Compensation (BLC), Peak
White Inversion (PWI) to eliminate the effect of
point sources of light that would normally cause
the lens iris to close such as car headlamps and
a new concept Auto Tracing White balance
(ATW) for accurate colour correction.
Available in both low and mains voltage, the
colour/mono camera provides the perfect choice
for professional installers.
Features
• 1/3" interline transfer CCD
• 470tvl
• 0.5lux Colour 0.01lux Monochrome
• >50dB Signal to noise / ratio
• On screen display (OSD)
with easy to use menus
• Auto tracing white balance (ATW)
• Digital Signal Processing (DSP)
• Internal and line lock synchronisation
• C and CS lens mount
• Supports Video iris and DD iris
and Manual Iris lenses
• Auto iris (AI) / Auto
electronic shutter (AES)
• 6 adjustable BLC windows
• 8 adjustable shutter steps
• RS485 control
• 230Vac or 24Vac @ 4.5W options
Datasheet
HCCM484X / HCCM485X
Day-Night Camera
Datasheet
Technical Specifications
HCCM484X / HCCM485X
Image sensor
1/3" Interline Transfer CCD
Resolution
752(H) x 562(V)
Colour: 0.5 lux
Signal to noise ratio
Digital signal processing
On screen display
Video output
Adjustable gamma
Gain control
Backlight compensation
Scanning system
Internal, line-locked, external (VS/VBS0 or
multiplexed verticaldrive (VD2) selectable
Lens mount
C/CS mount with adjustable back focus
70TVL
Effective pixels
Sensitivity
Sync system
Mono: 0.01 lux
Operating temperature
Operating humidity
>50dB
DSP
Weight
OSD
Dimensions
-10ºC to +50ºC (14ºF to 122ºF)
Less that 90% RH (non-condensing)
0.41kg
67 x 55 x 123 (WxHxD) mm
Power consumption
1Vp-p 75 Ohms
Power
requirements
0.45 - 1.0
Selectable on/off
4.5W maximum
HCCM484X:
12VDC - 24VAC
HCCM485X:
90-250V AC
6 adjustable windows
PAL: 625 lines 2:1 interlace
Auto iris lens type
Selectable Direct Drive or Video Drive
Iris control range
Selectable 1/50 - 1/10000 second
The manufacturer reserves the right to alter the specification of products without prior notice.
p
VIDEO OUT
AI
VIDEO
BLC
LOW AGC
LL
AES
D.D.
ON
HIGH AGC
INT
POWER
ALC
L
H
V-PHASE
-
+
GND
Front View
~
2.27"
(57.9mm)
+ DC 12V
~ AC 24V
Rear View
Top View
2.57"
(65.2mm)
5.56" (141.2mm)
Side View
Honeywell Security (UK Head Office)
Aston Fields Road, Whitehouse Industrial Estate,
Runcorn, Cheshire. WA7 3DL
Honeywell Security (UK Southern Office)
Unit 4, Barnes Wallis Court, Cressex Business Park,
High Wycombe,Buckinghamshire HP12 3PS
t: +44 (0) 1928 754040 f: +44 (0) 01928 754041
t: +44 (0) 1494 493600 f: +44 (0) 01494 493636
SPCMDNCM040413UK
www.honeywell.com/security