X

HD4DIPX
EQUIPTM SERIES TRUE DAY/NIGHT VANDAL DOME
NETWORK CAMERA
Honeywell’s EQUIPTM Series is an array of IP-based products that have an open
architecture platform and utilise a single Application Program Interface (API). The API
allows for a common user experience and integration with hybrid Digital Video
Recorders (DVRs) and Network Video Recorders (NVRs).
The Honeywell HD4DIPX true day/night vandal dome network camera is a high
performance, 1/3" CCD network camera offering the latest in digital video
surveillance in an ultra compact and vandal resistant camera. It combines worldclass video performance with the EQUIP Series IP networking technology providing
streaming MPEG-4 images in 4CIF, 2CIF, or CIF resolutions with rates up to 25 fps
for PAL systems.
The HD4DIPX camera adapts to varying lighting conditions to ensure the highest
picture quality even in extreme low light conditions. When the light level drops too
low for accurate video identification in colour, the camera automatically switches to
black and white video to capture more detail.
The HD4DIPX has built-in Power over Ethernet (IEEE 802.3af), which allows power
to be supplied to the camera using the network, eliminating the need for a separate
power supply and reducing the cost of installation. For additional installation flexibility
the unit can also be powered with 12 VDC or 24 VAC.
Market Opportunities
The HD4DIPX is a network surveillance solution designed for object recognition
that is required in locations where variable light conditions exist. Its discreet,
vandal-resistant and outdoor design provides maximum protection against dust,
dirt and water and is also impact resistant. This provides optimum performance for
both indoor and outdoor applications.
Features:
• 4CIF, 2CIF, or CIF resolutions
• Multiple levels of password protected
• 1/3" colour CCD, 540 TVL
remote access prevents unauthorised
• Excellent low light performance, down
users from altering system settings
to 0.1 lux
• Camera Sabotage Detection
• MPEG-4 compression
• Remote firmware updates
• Supports both Dynamic and Static IP
addresses
• Variable day/night threshold setting to
accommodate switching to black and
white images in low light
• Includes advanced IP locator software
to make system set-up easy
• Web server for remote set-up of
camera video and network parameters
• 12 VDC/24 VAC or PoE IEEE 802.3af
choice of power inputs
• IP66 rated, resistant against water
and dust
• Supports two-way audio
HD4DIPX
SPECIFICATIONS
Like all cameras in the EQUIP Series, the HD4DIPX uses Honeywell proprietary technology for camera sabotage detection,
remote firmware updating and for secure storage of all camera settings. Camera sabotage detection notifies the user when
a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a
live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to
remotely upload firmware to the camera. Set-up is quick and easy and can be customised through a Web client or from an
NVR or DVR. The built-in Web server provides password protected access to the camera’s video and network set-up.
System Diagram
Internet Explorer or Honeywell IT Utility
NETWORK
Workstation
EQUIP SERIES
CAMERAS
Hybrid DVR or NVR
Hybrid DVR
Monitor
NETWORK
NVR
Keyboard
EQUIP SERIES
CAMERAS
Monitors
Monitors
HD4DIPX
SPECIFICATIONS
Environmental
Operational
Temperature
Operating: 14°F to 122°F (-10°C to 50°C)
Storage: -4°F to 140°F (-20°C to 60°C)
Relative
Humidity
0% to 85%, non-condensing
Thermostat
Operation
Thermostatically controlled to activate
<113º F (<45º C)
Rating
IP66
Video Standard
PAL
Scanning
System
625/50 lines (PAL)
Image Sensor
1/3" CCD
Number of
Pixels
(H x V)
752 x 582 (PAL)
Minimum
Illumination
0.6 lux colour/0.4 lux BW @ 50 IRE, F1.3
0.25 lux colour/0.15 lux BW @ 30 IRE, F1.3
IP Specifications
Horizontal
Resolution
Greater than 540 TVL
Video
Compression
Video Output
1.0 Vp-p @ 75 Ohms
Resolutions
MPEG-4 Part 2 (ISO/IEC 14496-2) SP level 0-3
4CIF
2CIF
CIF
PAL
704 x 576
704 x 288
352 x 288
Sync System
Internal
S/N Ratio
50 dB or more (AGC off)
Auto Gain
Control
Off/On, selectable
Frame Rate
PAL
Up to 25 fps video in all resolutions
Automatic
Electronic
Shutter
1/50–1/100,000 sec (PAL)
Video
Streaming
MPEG-4 controllable frame rate and bandwidth.
Constant or variable bit rate
Automatic Lens
Control
DC Iris Level 1-25
Security
Multiple user access levels with password
protection
Direct Drive (DC) 2.8 mm to 10.0 mm
Vari-focal Auto Iris, F1.3
Users
1 Administrator, 4 Guests
Lens Type
Video Access
from Web
Browser
Camera live view for up to 5 clients. Full control
of all camera settings available to administrator
White Balance
ATW, User Fixed, AWC (Auto or Manual),
Fluorescent, MWB (Manual Mode), Indoor,
Outdoor
Minimum
Web
Browsing
Requirements
Pentium IV CPU 2.4 GHz or equivalent AMD, 512
MB RAM, AGP graphics card 32 MB RAM
Windows® XP 2000, Internet Explorer 6.0 or
later
Installation
and
Management
Maintenance
Honeywell IP Utility software identifies the IP
address, checks status of device
Supported
Protocols
IPv4, HTTP, TCP, RTSP, RTP, ICMP, UDP, IGMP,
RTCP, FTN, DNS, DHCP, Bonjour, ARP
Back Light
Compensation
Off/On (Low, Mid, High)
Flickerless
Off/On, switchable
Gamma
0.45
Audio/Two-Way Line in/out
Electrical
Input Voltage
12 VDC/24 VAC, PoE IEEE 802.3af
Input Range
11–16 VDC, 17–28 VAC
Surge
Suppression
1.5 kW transient
Power
Consumption
8 W (max)
Regulatory
Mechanical
Dimensions
(W x H x D)
See Diagram
Weight
3.0 lb (1.3 kg) camera only
Construction
Housing: Aluminium
Finish: Cool Grey Powder Coat
Dome: Polycarbonate
Connector
Aux Video Output: 2-pin connector for video
test cable
Power Input:
Removable screw block
Alarm I/O:
Removable screw block
Network:
RJ45 connector
Audio In:
3.5 mm mono phone jack
Audio Out:
3.5 mm mono phone jack
Emissions
FCC, CE (EN55013)
Immunity
CE (EN50130-4)
Safety
EU: 73/23/EEC LVD
HD4DIPX
SPECIFICATIONS
System Compatibility
Hybrid DVRs
Fusion III
Full Featured Hybrid Digital Video Recorder, version 3.6 or higher
NVRs
Enterprise
Enterprise Class Digital Network Video Recorder System, version 5.6 or higher
DVM
Digital Video Manager, version R200.2 or higher
50 1.9
.4 8”
m
m
1.81”
46.0 mm
2.64”
67.0 mm
4.61”
117.5 mm
6.1”
154.97 mm
Ordering
HD4DIPX
EQUIP Series True Day/Night Vandal Dome Network Camera with DNR, 540 TVL, 2.8 - 10 mm VFAI,
12 VDC/24 VAC or PoE IEEE 802.3af, PAL
HD4DIP-PK
Pendant Mount Bracket
HD4DIP-WK
Wall Mount Bracket
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
Honeywell Security
Honeywell House
Bekker Street, Truer Close
Waterfall Park
Midrand 1685
South Africa
Tel: +27 (11) 695 8016
Fax: +27 (11) 315 2198
www.honeywell.com/security/za
HVS-HD4DIPX-RSA-01(0508)DS-COE
May 2008
© 2008 Honeywell International Inc.