DT900 Series DUAL TEC® MOTION SENSORS X-BAND TECHNOLOGY DT900 DT906 (with anti-mask) (with anti-mask) DT901 DT907 The use of two technologies—microwave and PIR—and features like anti-masking, vandal-resistant housing, large coverage patterns and three microcontroller-based sensitivity modes, make the powerful DT900 DUAL TEC sensors ideal for the harshest commercial and industrial environments. FEATURES • Microcontroller-Based Dual Technology Microwave and passive infrared (PIR) technologies, combined with microcontroller-based advanced signal processing, provide excellent detection while virtually eliminating false alarms and costly service calls. • Sensor Sabotage Prevention The DT900 Series uses Active Infrared for anti-masking to detect attempts to mask the sensor. The patented look-down lens catches saboteurs who try to disable the unit from below, while three different tamper switches deter would-be criminals from physically damaging the sensor. The patented INFORMER® function, designed primarily as a diagnostic tool, monitors for sensor blockage and can help identify a sabotage situation. • Queue Logic Event Processing The microcontroller in the DT900 converts all incoming microwave and PIR signals from analog-to-digital format. If the signal is determined to be valid it enters the Queue Logic Event Process. This process stores the valid signals within a moving window of time, keeping up to eight events for each signal type. Based on the First In First Out (FIFO) concept, Queue Logic requires a sophisticated on-board microcontroller to make advanced calculations for qualifying a sequence of events as an actual alarm. • Self-Test and Continuous Supervision for High Reliability This industrial-grade sensor performs multiple levels of supervision. The INFORMER function checks each technology continuously. The microcontroller conducts a self-test of the sensor’s functions at regular intervals, and reports any trouble using the on-board trouble relay. • Designed for Harsh Environments Vandal resistant housing combined with a zero clearance bug guard make the DT-900 series ideal for commercial and industrial applications such as warehouses, large retail facilities, manufacturing sites and schools. • Self-Adjusting Thresholds The on-board microcontroller automatically adjusts the microwave and PIR thresholds to compensate for environmental disturbances not related to actual intrusion events. True temperature compensation continually optimizes the performance of the PIR to account for changes in room temperature. Environmental noise compensation keeps common environmental disturbances such as fluorescent lights from causing the microwave to false alarm. • Technology – PIR for intrusion detection – Microwave for intrusion detection – Active infrared for anti-masking (DT900 and DT906) • Digital Fluorescent Light Filter Digital filter virtually eliminates interference caused by fluorescent lighting. • Three Microcontroller-based Sensitivity Modes Sensor sensitivity can be set to high for fastest capture, to normal, or to low for maximum false alarm immunity in harsh environments. DT900 Series DUAL TEC® MOTION SENSORS X-BAND TECHNOLOGY FEATURES • Sensitivity Two to four steps within field-of-view, depending on sensitivity setting selected. • Zero Clearance Bug Guard The bug guard provides zero clearance, protecting the pyro chamber from insects that can cause false alarms. • Small Animal Immunity Immune to small animals commonly found in commercial conditions (birds, rodents, snakes). • Installer-Friendly Design Designed with the installer in mind, the DT900 contains a large wiring space, protective clear plastic covers over the circuit boards to prevent damage, two end-of-line terminals, flashed over LEDs visible at great distance, a fast-install wall mounting plate for the included swivel mounting bracket, and easy vertical and horizontal adjustment. • Mirror Optics For Long Range The DT900 series utilizes custom designed mirror optics to provide effective capture at long range. Each model is easily selectable between two ranges. • LED Diagnostics The LEDs will display codes to indicate an anti-masking condition, INFORMER condition, trouble condition, and recallable codes to indicate INFORMER results and whether or not there was a self-test failure. • Advanced Commercial/Industrial Features In addition to anti-masking (DT900/DT906), the DT900 Series has command input for initiating a self-test remotely, has CENELEC two wire input options, and has a remote LED enable input. • PIR Fields-of-View (Edges) DT900/DT901 27m (90') Range Long: 18 Intermediate long: 18 Intermediate: 16 Intermediate lower: 12 Lower: 8 Look-down: 2 DT906/DT907 61m (200') Range Long: 2 Intermediate long: 6 Intermediate: 4 Intermediate lower: 4 Lower: 8 Look-down: 2 15m (50') Range Long: 18 Intermediate long: 16 Intermediate: 12 Lower: 8 Look-down: 2 37m (120') Range Long: 6 Intermediate long: 4 Intermediate: 4 Lower: 8 Look-down: 2 • DT900 Series Products; Model/Range DT900 (anti-mask) 15m x 12m (50' x 40') 27m x 21m (90' x 70') DT906 (anti-mask) 37m x 3m (120' x 10') 61m x 5m (200' x 15') DT901 15m x 12m (50' x 40') 27m x 21m (90' x 70') DT907 37m x 3m (120' x 10') 61m x 5m (200' x 15') DETECTION PATTERNS Side View Top View DT906 and DT907 set for 61m (200ft) range BARRIER LENS Top View Side View WIDE ANGLE LENS DT900 and DT901 set for 27m (90ft) range DT900 Series DUAL TEC® MOTION SENSORS X-BAND TECHNOLOGY SPECIFICATIONS • Power Requirement – 10–15VDC; 50 mA (max) at 12VDC – AC ripple: 3 V peak-to-peak at nominal 12VDC • Physical Dimensions – 20 cm x 17 cm x 15 cm (8" x 6-1/2" x 6") • Weight – Product: 1.36 kg (3 lbs) – Pkgd Product: 1.6 kg (3.5 lbs) • Alarm Relay – Energized Form C; 25VDC, 125 mA – 22 ohm series protection resistor • Tampers – Wall and bottom cover (DT900 and DT906) – Top cover (all models) – 30VDC, 25 mA (N.C.) • PIR White Light Immunity – 6500 LUX • RFI Immunity – 30 V/m, 10 MHz to 1000 MHz • Anti-mask (DT900/DT906) and Trouble Relays – De-energized Form B (Normally Closed) relays, 30VDC, 25 mA PRODUCT FEATURES • Operating Temperature – 0° to 49° C (32° to 120° F); 5% to 95% relative humidity, non-condensing • Input 1 & 2 – Self-test initiate – Active low 0 to 1.5 V, Inactive high 5 to V+ • Optimal Mounting Height Range – 2m (6') minimum to 3.7m (12') maximum • Microwave Frequency – X-Band • ESD Immunity – +10 kV • Approvals/Listings – UL – ULC – CE – C-Tick – EN50131-I Grade 3, Class II (DT900/DT906) DT900 DT901 DT906 DT907 15 x 12m (50' x 40') or 27 x 21m (90' x 70') 15 x 12m (50' x 40') or 27 x 21m (90' x 70') 37 x 3m (120' x 10') or 61 x 5m (200' x 15') 37 x 3m (120' x 10') or 61 x 5m (200' x 15') Sensor Look-Down Yes Yes Yes Yes Microcontroller Processing Yes Yes Yes Yes Anti-masking Yes No Yes No Sensitivity Adjustments Yes Yes Yes Yes Separate Outputs for Trouble and Anti-mask Yes No Yes No Range Alarm Relay Form C Form C Form C Form C Swivel Mount Bracket Included Included Included Included Yes Yes Yes Yes Yes (2) No Yes (2) No 3.6m (12') 3.6m (12') 3.6m (12') 3.6m (12') Calibrated Mounting Adjustments Yes Yes Yes Yes Self-Diagnostics Yes Yes Yes Yes Remote LED Enable Yes No Yes No Zero-Clearance Bug Guard Yes Yes Yes Yes EOL Terminals Yes Yes Yes Yes Temperature Compensation Yes Yes Yes Yes Cenelec Conformity Yes No Yes No Remote Self-Test Yes No Yes No Tamper Switch on Housing Tamper Switch(es) on Swivel Mount Maximum Recommended Mounting Height DT900 Series DUAL TEC® MOTION SENSORS X-BAND TECHNOLOGY MECHANICAL MOUNTING SPECIFICATIONS 1.99 [ 5.1 ] 4 MOUNTING SCREW HOLES. MOUNTING HOLES ARE FOR #10 SCREWS 0.49 [ 1.2 ] 2.44 [ 6.2 ] 0.33 [ 0.8 ] LOCATION FOR INSTALLATION OF #10 SCREW FOR TAMPER SWITCH ACTUATION 1.57 [4] MOUNTING PLATE ROTATED 180° ON VERTICAL AXIS TO FACE WALL 7.08 [ 18 ] 5.20 [ 13.2 ] 8.50 [ 21.6 ] ORDERING DT900 DUAL TEC, 90' x 80', wide area with anti-mask DT901 DUAL TEC, 90' x 80', wide area DT906 DUAL TEC, 200' x 15', long range with anti-mask DT907 DUAL TEC, 200' x 15', long range Honeywell Security & Custom Electronics Honeywell International Inc. P.O. Box 9035 Syosset, NY 11791 www.honeywell.com PL06013 L/DT900DS/D July 2006 ©2006 Honeywell International Inc. Dimensions: Inches [Centimeters]