8 7 6 5 4 3 ALUMINUM COMPATIBLE LASER WELDABLE NANO DUAL LOBE CONNECTOR • CONFIGURATION WITH THE FLANGE LOCATED AT THE TOP OF THE CONNECTOR • DESIGNED TO LASER WELD INTO A LOW-PROFILE ELECTRONIC CHASSIS WALL D 2 SRIND501 DOCUMENT REVISIONS REV DCN REVISION DATE RELEASE APPROVAL - INIT RLSE 07-03-12 J. PETRI A DCN001523 3/18/2015 J.PETRI B DCN001621 10/12/2015 Jim Petri 2015.10.23 08:50:44 -04'00' D • CONFORMS TO MIL-DTL-32139 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37 AND 51 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-32139/4. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100 / .000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. FLEXTAIL OPTION ONLY, PRE-TIN SOLDER PIN ENDS USING SN63PB37 PER J-STD-006. C SHELL: CHEMICAL CONVERSION COAT IN ACCORDANCE WITH MIL-C-5541, CLASS 1A. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRIND501 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION (321) 254-4067 www.srihermetics.com a division of WINCHESTER TITLE CONNECTOR, 250DL, TOP FLANGE, AL LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 SCALE 6:1 2 CAGE CODE SRIND501 3PJY7 SHEET 1 REV B 1 OF 3 8 7 6 5 3 4 2 SRIND501 DOCUMENT W .002 O .010 A .010 D D .185±.002 B .010 .003 MAX BRK ALL AROUND .020±.002 C PIN EXTENSIONS (SEE SH 3) C WELD FLANGE .225 Y±.001 A .030 MIN PLATING REMOVAL B CONTACT VIEW A B PIN END STYLE: A-STRAIGHT CUT B-WIREBOND FLAT C-FLEX TAIL .188±.001 .003 MAX BREAK .008±.002 2X R O .015±.002 A SUGESSED HOLE DETAIL A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION (321) 254-4067 www.srihermetics.com a division of WINCHESTER TITLE CONNECTOR, 250DL, TOP FLANGE, AL LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 SCALE 6:1 2 CAGE CODE SRIND501 3PJY7 SHEET 1 REV B 2 OF 3 8 6 7 STRAIGHT PIN END STYLE, A 5 4 3 WIREBOND FLAT PIN END STYLE, B D 2 SRIND501 DOCUMENT FLEX TAIL PIN END STYLE, C A PIN EXTENSION A, B D PIN EXTENSION A, B .015 .000/.010 .005 MIN THICK .012 MIN WIDE C C PART NUMBER SRIND501 - X - A 1 A .110 B .110 PART NUMBER SRIND501 - X - B 1 SRIND501 - X - B2 A .060 .040 B .040 .060 SRIND501 - X - B3 .050 .050 PART NUMBER SRIND501 - X - C 1 A .037 B B A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION (321) 254-4067 www.srihermetics.com a division of WINCHESTER TITLE CONNECTOR, 250DL, TOP FLANGE, AL LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 SCALE 6:1 2 CAGE CODE SRIND501 3PJY7 SHEET 1 REV B 3 OF 3