Winchester Electronics Presents... Type N Connectors for LMR® Cable RoHS Compliant TM Winchester Electronics’ Type N connector series for Times Microwave LMR® series of cable was designed specifically to terminate to the LMR® series of cable using standard LMR® trimming and crimp tooling. Designed around the standard termination tooling, our Type N connector series is an excellent choice for field installations and repairs. All straight Type N series utilize a solderless center contact which saves time when terminating to cable; just point the center conductor, insert the cable, and crimp the braid. The Type N connector series is designed specifically to terminate to the LMR® series of cable using standard LMR® tooling. Product Benefits: Solderless Center Contact for easy installation. Utilizes Times LMR® Trim and Crimp tools for termination of straight configurations. Hex nut for easy mating and torquing. Tri-metal plated versions for excellent PIM and wear resistance. Ribbed body for adhesive tubing retention. LMR® is a registered trademark of Times Microwave Systems, Inc. July 2011 www.winchesterelectronics.com Electrical Mechanical NOMINAL IMPEDANCE: OPERATING FREQUENCY: VOLTAGE STANDING WAVE RATIO: INSERTION LOSS (DB MAX): INSULATION RESISTANCE: R.F. LEAKAGE: DIELECTRIC WITHSTANDING VOLTAGE: AT SEA LEVEL RG142 Cable: R.F. HI-POTENTIAL: RG142 Cable: VOLTAGE RATING: RG142 Cable: 50 Ohms MATERIALS: DC to 11.0 GHz Body, Body Components: Brass Per ASTM B16 Center Contacts: Copper Alloy Per ASTM B196 1.25 to 11 GHz Insulation: PTFE (Teflon) Per ASTM D1710 0.3 dB MAX @ 10 GHz Crimp Ferrules: Annealed Copper Alloy 5,000 Megohms MIN Gasket: Silicone Rubber -90 dB Minimum @ 3 GHz 2,500 VRMS MAX AT 5 MHZ 670 VRMS AT SEA LEVEL 1,000 VRMS MAX CONTACT RESISTANCE (MILLIOHMS MAX): Center Contact: Outer Contact: Braid to Body: CORONA LEVEL (VRMS): RG142 Cable: FINISHES: AT 70,000 FT. 60 VRMS AT 70,000 FT. 85 VRMS 1.0 1.0 0.5 Center Contacts: .000030 MIN Gold Per ASTM B488 Type II, Grade C, over .000100 MIN. Copper Per ASTM B734 Other Metal Parts: Tri-metal Plated to meet the corrosion requirements of MIL-C-39012 MATING CHARACTERISTICS: Mating: 5/8” - 24 Threaded Coupling Coupling Nut Retention: 100 LBS. MIN DURABILITY: 500 Matings CABLE RETENTION (RG-142 CABLE): 40 LBS. MIN AT 70,000 FT. 250 Environmental TEMPERATURE RATING: -65°C to +165°C CORROSION RESISTANCE: MIL-STD-202, Method 101, Cond B VIBRATION: MIL-STD-202, Method 204, Cond B SHOCK: MIL-STD-202, Method 213, Cond B, 75 G’s @ 6 Millisec TEMPERATURE CYCLING: MIL-STD-202, Method 107, Cond B Times Part Number Winchester Part Number Times Trim Tooling EZ-200-NM EZ-240-NM EZ-400-NMH-D EZ-600-NMH-D 600-900-2000R 600-900-2400R 600-900-4004R 600-900-6000R ST-400-EZ ST-600-EZ (Use DBT-01 for all cables) Connecting Innovation to Application® 62 Barnes Industrial Road North Wallingford, CT 06492 Phone: (203) 741-5400 • Fax: (203) 741-5500