Telecommunication Connectors 716 Series

Winchester Electronics Presents...
7/16 Series Telecom Connectors
Winchester Electronics’ KINGS® Brand 7/16 connector series is a high quality, 50
Ohm product designed to achieve excellent RF performance and withstand the vibration,
shock, moisture, and temperatures of adverse outdoor environments. They are a rugged,
solid brass bodied connector with an M29 x 1.5 mating thread. The typical use is in high
power, single and multi-channel base stations, antennas, and broadcast communication
systems operating at 100 watts per channel. These connectors have few components to
handle and are easily assembled to cable.
This product line consists of cable connectors, receptacles, adapters within series,
adapters to “N” series, and accessories.
July 2011
www.winchesterelectronics.com
Material
Electrical
Nominal Impedance:
Frequency Range:
Voltage Rating:
Dielectric w/standing Voltage:
Peak Power:
Average Power (at 800 MHz):
VSWR (on 1/2 in. Corrugated Cable):
Insulation Resistance:
Insertion Loss:
50 Ohms
DC to 6 GHz
2,700V RMS
4,000V RMS (Test - 1 min.)
40 KW
3 KW
DC - 2 GHz - 1.06 max.
2 - 3 GHz - 1.09 max.
3 - 4 GHz - 1.12 max.
10,000 Megohms min.
0.05/Freq. GHz dB max
Insulators:
Female Center Contacts: PTFE ASTM-D-4894
Beryllium Copper,
ASTM-B-196 (heat treated)
Male Center Contacts:
Brass, ASTM-B-16
Outer Contacts:
Brass, ASTM-B-16
Bodies:
Brass, ASTM-B-16
Crimp Sleeves: Commercial Bronze,
Alloy 220
Gaskets & Seals:
Silicone Rubber,
ZZ-R-765
Mechnical
Finishes*
Center Contact Attachment:
Outer Conductor Attachment:
Center Contacts & Outer
Conductor Parts: Coupling Nuts & Cable
Clamp Nuts:
Direct Solder
Collet Clamp/
Compression for Helical
Crimp for Braided Cables
Direct Solder for Tubular
Interface Dimension:
Per IEC 169-4
Mating:
M29 x 1.5 Thread
Connector Durability:
500 Cycles min.
Coupling Nut Torque:
15-20 ft. lbs.
Coupling Nut Retention:
200 lbs. min.
Cable Retention (on 1/2 in. Corrugated Cable):150 lbs. min.
Silver or Gold
Nickel
*White bronze plating on all body, coupling, and clamp nut parts is available. For
white bronze plating add “MJ3” suffic to part numbers shown, e.g., 3155-2-5 MJ3.
Environmental
Temperature Range:
Vibration:
Shock:
KINGS®
Part No.
Corrosion (Salt Spray):
-65° to +165°C
MIL-Std-202, Method 204, Compression Seals (where
Test Cond. B
Moisture Resistance:
MIL-Std-202, Method 213, Test Cond. 1
DESCRIPTION
3155-2-5
Straight Plug
3156-2-5
Right-angle Plug
3152-2-5
Panel Jack (4-hole Mtg)
3152-4-5
Right-angle Panel Jack
3153-3-5
Straight Jack
CABLE TYPE
MIL-Std-202, Method 204, Test Cond. B
appl.): 50 PSI
MIL-Std-202, Method 106
CABLING
METHOD
CABLE
PROCEDURE
3-654-1
3-654-2
Andrew 1/2” Heliax
FSJ4-50B
FSJ4RN-50B
Collet Clamp
w/direct solder to
center contact
3-654-1
3-654-2
3-654-1
3152-5-5
Bulkhead Jack (D Hole Mtg)
3155-3-5
Straight Plug
Times LMR 400
3-654-1
3155-4-5
Straight Plug
Times LMR 600
3153-1-5
Straight Jack
Times LMR 400
3153-2-5
Straight Jack
Times LMR 600
3155-5-101
Straight Plug
CommScope 3/8” CR50396PE
3155-6-101
Straight Plug
CommScope 1/2” CR50540PE
3-696
K-Grip Crimp
w/direct solder to
center contact
3-696
3-696
3-696
Direct Solder
3-692
3-692
Connecting Innovation to Application®
62 Barnes Industrial Road North
Wallingford, CT 06492
Phone: (203) 741-5400 • Fax: (203) 741-5500