For more information, please visit the product page. SERIES: SJ-356XN date 04/05/2016 page 1 of 3 DESCRIPTION: 3.5 MM AUDIO JACKS FEATURES • low profile design • switch options include: – no switch – tip switch – ring switch – tip and ring switch RoHS PART NUMBER KEY SJ - 356 X N Base Number Switch Options 6A = no switch 6B = tip switch (no ring) 7A = tip switch 7B = ring switch 8 = tip and ring switch SPECIFICATIONS parameter conditions/description min rated input voltage typ 12 rated input current contact resistance between terminal and mating plug between terminal in a closed circuit1 insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 0.3 -40 life A 50 30 mΩ mΩ 500 Vac 3 kg 500 g 85 5,000 flammability rating UL94V-0 RoHS 2011/65/EU Note: Vdc MΩ any direction for 10 seconds operating temperature units 1 100 insertion/withdrawal force terminal strength max °C cycles 1. When measured at a current of less than 100 mA / 1 kHz SOLDERABILITY parameter conditions/description min typ max units wave soldering dipped in solder pot for 5±0.5 seconds at 255 260 265 °C cui.com For more information, please visit the product page. CUI Inc SERIES: SJ-356XN DESCRIPTION: 3.5 MM AUDIO JACKS date 04/05/2016 page 2 of 3 MECHANICAL DRAWING units: mm [inches] tolerance: X.X=±0.5 mm X.XX=±0.1 mm X.XXX=±0.05 mm 14.0 0.551 12.0 0.472 3.00 0.118 9.0 0.354 1.00 0.039 MATERIAL PLATING terminal 1 copper alloy tin terminal 2 stainless steel silver terminal 3 copper alloy tin terminal 4 brass silver terminal 5 brass silver terminal 6 brass silver terminal 10 brass tin terminal 11 brass tin bushing brass nickel plastic PA66 contact clip C5210 3.600 0.142 5.00 0.197 1.00 0.039 (TYP) 6.00 0.236 1.000 0.039 (TYP) 3.3 0.130 0.3 (TYP) 5.0 0.197 (5 PLCS) 0.8X1.5 (5 PLCS) 2.00 0.079 (2 PLCS) 18.5 0.728 0.3 1.0 0.039 (3 PLCS) 1 11 10 4 5 10.0 0.394 2 6 11 2 4.5 0.177 (3 PLCS) 10.0 0.394 (5 PLCS) PCB LAYOUT TOP VIEW 1.2 0.047 (7 PLCS) Model No. 2.00 0.079 (2 PLCS) SJ-3566AN Schematic Note: 4 5.0 0.197 (5 PLCS) SJ-3566BN 2 4 5 6 4 5 6 10.0 0.394 5.0 0.197 3 1 3 14 Ø 3.5 MATING PLUG 6 5 10 1 5.0 0.197 PCB MATING SURFACE 10.0 0.394 (5 PLCS) 4.5 0.177 (3 PLCS) 3 PCB EDGE silver 4 5 6 SJ-3567AN SJ-3567BN 1 1 3 10 2 10 2 4 5 6 4 5 6 SJ-3568N 1 3 11 1 3 11 10 2 2 4 5 6 4 5 6 4 5 6 4 5 6 4 5 6 Plug Plug Not Inserted Inserted Plug Plug Not Inserted Inserted Plug Plug Not Inserted Inserted Plug Plug Not Inserted Inserted Plug Plug Not Inserted Inserted 1 sleeve sleeve sleeve sleeve sleeve 2 tip tip tip tip tip PIN 3 ring NP ring ring ring 10 NP tip switch tip switch NP tip switch 11 NP NP NP ring switch ring switch 1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted. cui.com For more information, please visit the product page. CUI Inc SERIES: SJ-356XN DESCRIPTION: 3.5 MM AUDIO JACKS date 04/05/2016 page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 09/13/2006 1.01 new template applied 12/13/2011 1.02 widened operating temperature range 09/25/2013 1.03 updated drawing 02/20/2015 changed material of terminal 2 to be stainless steel 04/05/2016 1.04 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.