Photoelectric sensors OZDM 16 (Laser, switching output) Diffuse contrast sensors sample drawing 50 4 Pot LED 50 4,3 8,5 4,3 12 30 * 19 4 15,4 25 M12 x 1 36 3 * emitter axis general data sample picture type diffuse contrast sensor light source pulsed red laser diode sensing distance Tw 0 ... 250 mm optimum operating distance 40 ... 80 mm detectable remission difference (on grey) > 8 % repeat accuracy < 0,1 mm at laser focus output indicator LED yellow sensitivity adjustment potentiometer, 14 turn laser class 1 distance to focus 80 mm wave length 650 nm electrical data response time / release time < 0,05 ms voltage supply range +Vs 12 ... 30 VDC current consumption max. (no load) 65 mA current consumption typ. 60 mA voltage drop Vd < 2 VDC output current < 200 mA short circuit protection yes reverse polarity protection yes laser warning CLASS 1 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 mechanical data width / diameter 15,4 mm height / length 50 mm depth 50 mm type rectangular housing material die-cast zinc front (optics) glass ambient conditions operating temperature -10 ... +50 °C protection class IP 67 1 www.baumer.com 17/6/2015 Photoelectric sensors OZDM 16 (Laser, switching output) Diffuse contrast sensors order reference connection types output circuit output function OZDM 16N1001 cable 3 pin, 2 m NPN light operate OZDM 16N1001/S14 connector M12 4 pin NPN light operate OZDM 16P1001 cable 3 pin, 2 m PNP light operate OZDM 16P1001/S14 connector M12 4 pin PNP light operate OZDM 16P3001 cable 3 pin, 2 m PNP dark operate OZDM 16P3001/S14 connector M12 4 pin PNP dark operate 2 www.baumer.com 17/6/2015