Low Capacitance Transient Voltage Suppressor TV05B5V0P-G Thru. TV05B500P-G Stand-Off Voltage: 5.0 to 50 Volts Peak Pulse Power: 500 Watts RoHS Device DO-214AA (SMB) Features -Glass passivated chip. -Low leakage. -500W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%. 0.155(3.94) 0.130(3.30) 0.087(2.20) 0.077(1.96) 0.191(4.85) 0.171(4.35) -Excellent clamping capability. -Very fast response time. 0.012(0.30) 0.006(0.15) Mechanical data 0.096(2.44) 0.083(2.13) -Case: DO-214AA / SMB, molded plastic. 0.008(0.20) 0.001(0.02) 0.060(1.52) 0.030(0.75) -Epoxy: UL 94V-0 rate flame retardant. 0.216(5.50) 0.201(5.10) -Lead: Solderable per MIL-STD-750, method 2026 guranteed. -Polarity: Color band denotes TVS cathode en. Dimensions in inches and (millimeter) -Mounting Position: Any -Approx. weight: 0.108 grams Maximum Ratings and Electrical Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Units Peak power dissipation on 10/1000μS waveform (Note 1) PPP 500 W Power dissipation on infinite heatsink at TL=75 °C (Fig.2) PD 3.0 W Peak Pulse current with a 10/1000µs waveform (Fig.2) (Note 1) IPP See Next Table A TJ,TSTG -55 to +150 °C Characteristics Operating junction and storage temperature range Notes: 1. Non-repetitive Current pulse per fig.3 and derated above TA=25°C Per Fig.2 Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 1 QW-BTV20 Comchip Technology CO., LTD. Low Capacitance Transient Voltage Suppressor RATING AND CHARACTERISTIC CURVES (TV05A5V0P-G thru TV05A500P-G) Fig.1 - Peak Pulse Power Rating Curve 140 Non-Repetitive Pulse Waveform shown in Fig.3 TA=25°C Percentage of Rated Power, (%) Peak Pulse Power,PPK, (kW) 100 Fig.2 - Power Derating Curve Surge Current 10 “0.5” PPK Impulse Exponential Decay td 1 PPK td=7tp td Half Sine Power Dissipation 120 100 80 Peak Power (Single Pulse) TJ=Initial Temperature 60 40 20 Square PPK td Current Waveorms 0.1 0.1 0 1 10 100 1000 10000 0 25 50 75 100 125 150 175 Lead Temperature, TL (°C) Pulse Width,Td (μS) Fig.3 - Pulse Waveform Fig.4 - AC Line Protection Application 125 Pulse width (td) is defined as the point where the peak current decay to 50% of IPP tr=10μS + Peak Pulse Current, (%) 100 Peak value IPP Low Capacitance TVS 75 Half value IPP/2 50 + 10/1000μS waveform as defined by R.E.A. 25 td 0 0 1 2 Time, (mS) 3 4 Application Note: Device must be used with two units in parallel, opposite in polarity as shown in circuit for AC signal line protection. Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 2 QW-BTV20 Comchip Technology CO., LTD. Low Capacitance Transient Voltage Suppressor Electrical Characteristics (TV05B5V0P-G Thru. TV05B500P-G) Part No. Stand-off Voltage VWM Minimum Breakdown Voltage Maximum Reverse Leakage IR @VWM Maximum Clamping Voltage VC @IPP Maximum Reverse Surge Curret IPP Maximum Junction Capacitance @0V Working Inverse Blocking Voltage VWIB Inverse Blocking Leakage Current IIB @VWIB Inverse Voltage VPIB Marking Code VBR IT (V) (V) (mA) (uA) (V) (A) (PF) (V) (mA) (V) TV05B5V0P-G 5.0 7.60 1 300 10.0 44.0 45.0 75 1 100 SAD TV05B6V0P-G 6.0 7.90 1 300 11.2 41.0 45.0 75 1 100 SAE TV05B7V0P-G 7.0 8.33 1 300 12.6 38.0 45.0 75 1 100 SAF TV05B8V0P-G 8.0 8.89 1 100 13.4 36.0 45.0 75 1 100 SAG TV05B8V5P-G 8.5 9.44 1 50 14.0 34.0 45.0 75 1 100 SAH TV05B100P-G 10.0 11.10 1 5 16.3 29.0 45.0 75 1 100 SAK TV05B120P-G 12.0 13.30 1 5 19.0 25.0 45.0 75 1 100 SAL TV05B150P-G 15.0 16.70 1 5 23.6 20.0 45.0 75 1 100 SAM TV05B180P-G 18.0 20.00 1 5 28.8 15.0 45.0 75 1 100 SAN TV05B220P-G 22.0 24.40 1 5 35.4 14.0 45.0 75 1 100 SAP TV05B260P-G 26.0 28.90 1 5 42.3 11.1 45.0 75 1 100 SAQ TV05B300P-G 30.0 33.30 1 5 48.6 10.0 45.0 75 1 100 SAR TV05B360P-G 36.0 40.00 1 5 60.0 8.60 45.0 75 1 100 SAS TV05B450P-G 45.0 50.00 1 5 77.0 6.80 45.0 150 1 200 SAT TV05B500P-G 50.0 55.50 1 5 88.0 5.80 45.0 150 1 200 SAU Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 3 QW-BTV20 Comchip Technology CO., LTD. Low Capacitance Transient Voltage Suppressor Reel Taping Specification d P0 P1 T E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DO-214AA (SMB) DO-214AA (SMB) SYMBOL A B C d D D1 D2 (mm) 3.67 ± 0.10 5.69 ± 0.10 4.50 (max) 1.55 ± 0.10 330.00 50.00 (min) 13.00 ± 0.20 (inch) 0.144 ± 0.004 0.224 ± 0.004 0.177 (max) 0.061 ± 0.004 13.000 1.969 (min) 0.512 ± 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.00 ± 0.30 18.40 (max) (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.012 0.724 (max) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 4 QW-BTV20 Comchip Technology CO., LTD. Low Capacitance Transient Voltage Suppressor Marking Code 1 1. C: COMCHIP 2 2. ○: Package C PKG A SMA B SMB C SMC 4 XXX 3 3. XXX: Marking code (see Page. 3) 4. : Cathod Band Suggested PAD Layout A DO-214AA(SMB) SIZE (mm) (inch) A 5.60 0.220 B 2.16 MAX 0.085 MAX C 1.52 MIN 0.060 MIN D 2.18 MIN 0.086 MIN B D C Standard Packaging REEL PACK Case Type DO-214AA (SMB) REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 5 QW-BTV20 Comchip Technology CO., LTD.