Powerful Sensing Solutions for a Better Life AHRS510 ATTITUDE & HEADING REFERENCE SYSTEM MEMSIC’s AHRS510CA is a field proven highreliability MEMS Attitude & Heading Reference System that supports all of the standard ARINC 429 message labels The AHRS510CA is designed for use in OEM and retrofit avionics systems upgrades, and for airborne antenna pointing systems. ARINC 429 INTERFACE Features • Primary Flight Attitude and Heading • Standard ARINC 429 AHRS Messages (Label 320, 324, 325 etc.) EFIS and Flight Management Systems Airborne Antenna Control • Optional Airdata External Input Aiding • Low Power < 10W The AHRS510CA meets all standard avionics performance requirements as a stand-alone system. For applications with more demanding performance requirements, the AHRS510CA provides the interfaces necessary to accept external velocity-aiding. • Comprehensive BIT (Built-in-Test) Applications Certifications • EFIS and Flight Management Systems • TSO C4c and TSO C6d Performance • Airborne Antenna Control • DO-160E Environments • High Reliability MEMS Sensors • Supports MEMSIC CRM-series Remote Magnetometers 28VDC @ 350mA Remote Magnetometer RS 422 ARINC 429 Roll, Pitch, Heading Rate, Acceleration and BIT ARINC 429 (B) Roll, Pitch, Heading Rate, Acceleration and BIT AHRS510CA Velocity Aiding (Optional) Phone: 408.964.9700 ARINC 429 (A) Fax: 408.854.7702 E-mail: [email protected] w w w. m e m s i c . c o m AHRS510 ATTITUDE & HEADING REFERENCE SYSTEM Performance AHRS510 Heading Range (°) Accuracy1 (2σ) Resolution (°) ± 180 ± 2.0 < 0.05 Attitude Range: Roll, Pitch (°) Accuracy1 (2σ) Resolution (°) ± 180, ± 90 ± 1.0 < 0.05 Angular Rate Range2: Roll, Pitch, Yaw (°/sec) Bias: Roll, Pitch, Yaw (°/sec) Resolution (°/sec) Bandwidth (Hz) ± 200 < ± 0.1 < 0.02 25 Acceleration Range2: X/Y/Z (g) Bias: X/Y/Z (mg) Resolution (mg) Bandwidth (Hz) ± 10 < ± 15 < 1.0 25 GYRO-VIEW 2.6 Configuration & Display Software GYRO-VIEW 2.6 provides an easy to use graphical interface to display, record and analyze all of the AHRS510 measurement parameters. Specifications Environment Operating Temperature (°C) Non-Operating Temperature (°C) Enclosure Electrical Input Voltage (VDC) Power Consumption (W) Digital Interfaces Physical Size Weight (in) (cm) (lbs) (kg) Other Components -40 to +70 -55 to +85 Sealed Housing 18-32 < 10 2x ARINC 429 output (high speed) 1x ARINC 429 input (low speed) 1x RS-422 input (remote mag) 4.66 x 4.53 x 4.86 11.84 x 11.51 x 12.35 3.0 1.36 MIL-C-38999, Series III Connector Each AHRS510CA is shipped with a 510 Series Installation Manual, and MEMSIC’s GYRO-VIEW 2.6 configuration and display software. An optional ARINC 429 to RS-232 interface cable is available (additional cost) for use with MEMSIC’s GYRO-VIEW and MAG-ALIGN application software running on a PC. The AHRS510CA system utilizes MEMSIC’s CRM-series remote magnetometer to ensure optimum heading alignment. Support Ordering Information Model Description AHRS510CA-400 AHRS with ARINC 429 Interface This product has been developed exclusively for commercial applications. It has not been tested for, and makes no representation or warranty as to conformance with, any military specifications or its suitability for any military application or end-use. Additionally, any use of this product for nuclear, chemical or biological weapons, or weapons research, or for any use in missiles, rockets, and/or UAV’s of 300km or greater range, or any other activity prohibited by the Export Administration Regulations, is expressly prohibited without the written consent and without obtaining appropriate US export license(s) when required by US law. Diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. Notes: 1 Requires connection to CRM Series Remote Magnetometer and correct MagAlign.2 The ARINC Label definition limits the output data ranges to +/-128 deg/sec and +/-4g. MEMSIC Inc. San Jose, California For more detailed technical information please refer to the AHRS510CA Installation and Operator’s Manual available online at: www.memsic.com/Support w w w. m e m s i c . c o m Preliminary Datasheet