DC-DC PCB MOUNTED CONVERTERS & POWER MODULES PBBA Series 1 5 - 2 5 W AT T S - D C / D C S I N G L E & M U LT I P L E O U T P U T FEATURES • • • • • • • High power density Low profile PCB mounting 2:1 input ratio Regulated output Overcurrent protection On/off remote control SPECIFICATIONS INPUT ENVIRONMENTAL Nominal voltage 12VDC, 24VDC, 48VDC Operating temperature -20°C to 55°C at FL Voltage range 9-18V, 18-36V, 36-72V Humidity 20%-90% RH, non condensing Input filter Yes Vibration Input protection Use external fuse 10Hz-55Hz 10G 3 min period for 60 minutes each along x, y, and z axis Shock/impact 50G 11mS once each along x, y and z axis OUTPUT Output voltage See table Voltage adjustment ±5% by external resistors Output current See table Output voltage setting Within ±5% of nominal Ripple & noise Line regulation All output 150mV pk-pk max. Single Out: 5V rail - 20mV, 12V rail - 48mV • Dual Out: ±12V rail - 60mV, ±15V rail - 75mV Single Out: 5V rail - 40mV, 12V rail - 100mV • Dual Out: ±12V rail - 600mV, ±15V rail 750mV Load regulation Dimensions Weight Mounting option PBBA-F: 45x50x8.5mm PBBA-G: 65x50x8.5mm PBBA-F: 55g PBBA-G: 65g Enclosed chassis mount with input/output screw terminals. Refer to PBBA-CM SELECTION TABLE - SINGLE OUTPUT MODEL NUMBER INPUT VOLTAGE VDC OUTPUT VOLTAGE VDC OUTPUT CURRENT A OUTPUT POWER WATT Temperature drift Over 0°C to 55°C - 1% Rise time 100mS with full load PBBA-053R3F 4.5-9 3.3 2 15W Overcurrent protection Set at approx. 105% of rating and recovers automatically Set at 115-140% of V out (sum of ± output voltage) PBBA-0505F 4.5-9 5 2 15W PBBA-0512F 4.5-9 12 1 15W PBBA-1205F 9-18 5 2.4 15W PBBA-1212F 9-18 12 1.3 15W PBBA-2405F 18-36 5 2.4 15W PBBA-2412F 18-36 12 1.3 15W PBBA-483R3F 36-76 3.3 2.4 15W PBBA-4805F 36-76 5 2.4 15W PBBA-4812F 36-76 12 1.3 15W PBBA-053R3G 4.5-9 3.3 4 25W PBBA-0505G 4.5-9 5 3.2 25W PBBA-0512G 4.5-9 12 1.7 25W PBBA-1205G 9-18 5 4 25W PBBA-1212G 9-18 12 2.1 25W PBBA-2405G 18-36 5 4 25W PBBA-2412G 18-36 12 2.1 25W PBBA-483R3G 36-76 3.3 4 25W PBBA-4805G 36-76 5 2.1 25W PBBA-4812G 36-76 12 2.1 25W Overvoltage protection OPERATING Efficiency Typically 83% Isolation Input - Output: 500Vdc Input - Case: 500Vdc Output - Case: 500Vdc Insulation resistance Remote control 50MΩ ON: Short circuit (RC & -Vin pins) or less than 1.2V. OFF: Open circuit (RC & -Vin pins) or 2.4 to 5.5V. Compatible with TTL. STANDARDS AND APPROVALS Safety 208 MECHANICAL UL60950-1, EN60950-1, CSA C22.2 No. 609501, IEC 60950-1 Doc. No. PBC9 Rev.C 28-4-11 PBBA Series SELECTION TABLE - MULTIPLE OUTPUT MODEL NUMBER PBBA-05D12F INPUT VOLTAGE VDC OUTPUT VOLTAGE VDC OUTPUT CURRENT A OUTPUT POWER WATT 4.5-9 ±12 or +24 0.6 15W MODEL NUMBER INPUT VOLTAGE VDC OUTPUT VOLTAGE VDC OUTPUT CURRENT A OUTPUT POWER WATT PBBA-05D12G 4.5-9 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 0.84 4.5-9 25W 25W 25W 25W 25W 25W 25W 25W PBBA-05D15F 4.5-9 ±15 or +30 0.5 15W PBBA-05D15G PBBA-12D12F 9-18 ±12 or +24 0.65 15W PBBA-12D12G 9-18 9-18 PBBA-12D15F 9-18 ±15 or +30 0.5 15W PBBA-12D15G PBBA-24D12F 18-36 ±12 or +24 0.65 15W PBBA-24D12G 18-36 15W PBBA-24D15G 18-36 15W PBBA-48D12G 36-76 PBBA-48D15G 36-76 PBBA-24D15F PBBA-48D12F PBBA-48D15F 18-36 36-76 36-76 ±15 or +30 ±12 or +24 ±15 or +30 0.5 0.65 0.5 15W TECHNICAL ILLUSTRATIONS PBBA-F PBBA-D-F PBBA-G PBBA-D-G Doc. No. PBC9 Rev.C 28-4-11 Powering Progress – www.powerbox.com.au 0.67 1.05 0.85 1.05 0.85 1.05 0.85 DC-DC PCB MOUNTED CONVERTERS & POWER MODULES 1 5 - 2 5 W AT T S - D C / D C S I N G L E & M U LT I P L E O U T P U T 209