8 This document, including the design, configuration and mechanical features revealed herein are the sole, confidential and proprietary property of TRU Corporation. Reproduction or use thereof, in whole or part, is prohibited without the prior written consent of TRU Corporation. 5 6 7 8X .343±.000 HOLE EQUALLY SPACED ON 5.100 BOLT CIRCLE 4 .472 MAX PANEL [12mm] .375 MATING SURFACE 8X ON D 3.52 MIN 3.56 MAX 2.94 2 3 1 REV. DESCRIPTION DATE APPROVED - ORIGINAL ISSUE 10/31/14 AM 6.00 .343 HOLE 5.100 B.C. D 3.50 TYP 4X .343 HOLE ON 2.812 B.C. TYP BOTH ENDS C C O-RING MOUNTING HOLE DIMENSIONS 5.80 ENGINEERING DATA B ELECTRICAL: IMPEDANCE: 50 OHMS NOMINAL FREQUENCY RANGE: DC to 3GHz NOTES: 1. UNLESS OTHERWISE SPECIFIED; ALL DIMENSIONS ARE REFERENCE ONLY. MECHANICAL: INTERFACE: 1-5/8EIA(f) PER EIA STD RS-225 AND MIL-DTL-24044 WITH SWIVEL FLANGE 2. B HARDWARE NOT PROVIDED FOR PANEL MOUNT FLANGE. ENVIRONMENTAL: SEALED INNER & OUTER CONDUCTORS, 10-6 mbar A MATERIAL: INSULATORS: PTFE (TEFLON) O-RINGS: SILICONE RUBBER BODIES: BRASS CONTACTS: BRASS MATERIAL DO NOT SCALE DRAWING UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES FINISH: BODIES: NICKEL PLATED CONTACTS: SILVER PLATED COMMENTS: AM 7 6 5 DATE TRU Corporation 245 Lynnfield St, Peabody, MA 01960 10/30/14 ENG APPR. AM DATE 10/30/14 MFG APPR. DATE OTHER APPR. DATE THIRD ANGLE PROJECTION 63 surface area: sq inch 8 TOLERANCES: FRACTIONS: 1/64 .XX : .01 .XXX: .005 ANGLES: 1/2` MACHINED SURFACES: DRAWN A TITLE: CONNECTOR, COAXIAL, RF 1-5/8EIA(f) to 1-5/8EIA(f) BLKD ADAPTER SIZE B DWG. NO. CAGE CODE: 92180 weight: 8.73 lbs 4 3 2 REV TRU-12800 - SHEET 1 OF 1 SCALE: 1:2 1