SMD Transient Voltage Suppressor ATV15C5V0-G Thru. ATV15C441-G Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device SMC/DO-214AB Features - Glass passivated chip. 0.280(7.02) 0.260(6.52) - 1500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% 0.245(6.15) 0.220(5.52) 0.126(3.16) 0.114(2.86) - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. 0.320(8.02) 0.305(7.64) - Comply with AEC-Q101 0.012(0.30) 0.006(0.15) 0.103(2.59) 0.079(1.98) - UL recognized file # E349157 - Range: ATV15C5V0J(B) thru. ATV15C101J(B) R 0.060(1.51) 0.030(0.75) 0.008(0.20) 0.000(0.00) Mechanical Data Dimensions in inches and (millimeter) - Case: DO-214AB/SMC molded plastic. - Epoxy: UL 94V-0 rate flame retardant Circuit Diagram - Terminals: Solderable per MIL-STD-750, method 2026. - Polarity: Color band denoted cathode end except bipolar. Bi-directional Uni-directional - Weight: 0.230 gram (approx.) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Units Peak power dissipation at 10/1000μS waveform (Notes.1) PPPM 1500 W Peak pulse current at 10/1000μS waveform (Notes.1) IPPM See table 1 A Steady state power dissipation at TL=75°C PD 6.5 W Peak forward surge current, 8.3mS single half sine-wave superimposed on rated load, uni-directional only (Notes.2) IFSM 200 A Maximum instantaneous forward voltage at 100A for uni-directional only (Note.3) VF 3.5/5.0 V Operation junction temperature range TJ -55 to +150 °C TSTG -55 to +150 °C Characteristics Storage temperature range Notes: O 1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 C, per Fig. 1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 1 AQW-BTV05 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Ratings and Characteristics Curve (ATV15C5V0-G Thru. ATV15C441-G) Fig.2 - Max. Non-Repetitive Surge Current 100 200 Peak Forward Surge Current , (A) Peak Pulse Derating in Percentage of Peak Power or Current, ( % ) Fig.1 - Pulse Derating Curve 75 50 25 0 160 120 80 40 0 0 25 50 75 100 150 125 175 1 10 100 Ambient Temperature, (°C ) Number of Cycles at 60Hz Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve 100 7 6 5 Peak Power, (kW) Steady Power Dissipation, (W) 8.3mS single half sine-wave (JEDEC method) TJ=TJ , max. 4 3 2 10 1.0 1 0.1 0 0 25 50 75 100 125 150 1 0.1 175 10 100 1000 10000 Lead Temperature, (°C ) Pulse Width, (μS) Fig.5 - Pulse Waveforem Fig.6 - Typical Junction Capacitance Peak Pulse Current, (%) 100 Peak value (Ipp) TJ = 25°C Pluse width(td) is defined as the point where the peak current decays to 50% of Ipp Ipp Half Value= 2 50 10 / 1000μsec. waveform as defined by R.E.A. Junction Capacitance, (pF) 100000 TR=10us Bi-directional @zero bias 10000 Uni-directional @zero bias 1000 Uni-directional @VRWM 100 10 td Bi-directional @ VRWM OC TJ=25 C f=1.0MHz 1 0 0 1.0 2.0 3.0 4.0 1 Time, (mS) 10 100 1000 Reverse Breakdown Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 2 AQW-BTV05 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (ATV15C5V0-G Thru. ATV15C441-G) Breakdown voltage VBR @ IT Part No. Min. (V) Max. (V) IT (mA) Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) UNI BI Device Marking Code ATV15C5V0J(B)-G ATV15C6V0J(B)-G ATV15C6V5J(B)-G ATV15C7V0J(B)-G 6.40 6.67 7.22 7.78 7.00 7.37 7.98 8.60 10 10 10 10 800 800 500 200 5.0 6.0 6.5 7.0 163.04 145.63 133.93 125.00 9.2 10.3 11.2 12.0 GDE GDG GDK GDM BDE BDG BDK BDM ATV15C7V5J(B)-G ATV15C8V0J(B)-G ATV15C8V5J(B)-G ATV15C9V0J(B)-G 8.33 8.89 9.44 10.00 9.21 9.83 10.40 11.10 1 1 1 1 100 50 20 10 7.5 8.0 8.5 9.0 116.28 110.29 104.17 97.40 12.9 13.6 14.4 15.4 GDP GDR GDT GDV BDP BDR BDT BDV ATV15C100J(B)-G ATV15C110J(B)-G ATV15C120J(B)-G ATV15C130J(B)-G 11.10 12.20 13.30 14.40 12.30 13.50 14.70 15.90 1 1 1 1 5.0 1.0 1.0 1.0 10.0 11.0 12.0 13.0 88.24 82.42 75.38 69.77 17.0 18.2 19.9 21.5 GDX GDZ GEE GEG BDX BDZ BEE BEG ATV15C140J(B)-G ATV15C150J(B)-G ATV15C160J(B)-G ATV15C170J(B)-G 15.60 16.70 17.80 18.90 17.20 18.50 19.70 20.90 1 1 1 1 1.0 1.0 1.0 1.0 14.0 15.0 16.0 17.0 64.66 61.48 57.69 54.35 23.2 24.4 26.0 27.6 GEK GEM GEP GER BEK BEM BEP BER ATV15C180J(B)-G ATV15C190J(B)-G ATV15C200J(B)-G ATV15C220J(B)-G 20.00 21.10 22.20 24.40 22.10 23.30 24.50 26.90 1 1 1 1 1.0 1.0 1.0 1.0 18.0 19.0 20.0 22.0 51.37 48.73 46.30 42.25 29.2 30.8 32.4 35.5 GET GEB GEV GEX BET BEB BEV BEX ATV15C240J(B)-G ATV15C260J(B)-G ATV15C280J(B)-G ATV15C300J(B)-G 26.70 28.90 31.10 33.30 29.50 31.90 34.40 36.80 1 1 1 1 1.0 1.0 1.0 1.0 24.0 26.0 28.0 30.0 38.56 35.63 33.04 30.99 38.9 42.1 45.4 48.4 GEZ GFE GFG GFK BEZ BFE BFG BFK ATV15C330J(B)-G ATV15C360J(B)-G ATV15C400J(B)-G ATV15C430J(B)-G 36.70 40.00 44.40 47.80 40.60 44.20 49.10 52.80 1 1 1 1 1.0 1.0 1.0 1.0 33.0 36.0 40.0 43.0 28.14 25.82 23.26 21.61 53.3 58.1 64.5 69.4 GFM GFP GFR GFT BFM BFP BFR BFT ATV15C450J(B)-G ATV15C480J(B)-G ATV15C510J(B)-G ATV15C540J(B)-G 50.00 53.30 56.70 60.00 55.30 58.90 62.70 66.30 1 1 1 1 1.0 1.0 1.0 1.0 45.0 48.0 51.0 54.0 20.63 19.38 18.20 17.22 72.7 77.4 82.4 87.1 GFV GFX GFZ GGE BFV BFX BFZ BGE ATV15C580J(B)-G ATV15C600J(B)-G ATV15C640J(B)-G ATV15C700J(B)-G 64.40 66.70 71.10 77.80 71.20 73.70 78.60 86.00 1 1 1 1 1.0 1.0 1.0 1.0 58.0 60.0 64.0 70.0 16.03 15.50 14.56 13.27 93.6 96.8 103.0 113.0 GGG GGK GGM GGP BGG BGK BGM BGP ATV15C750J(B)-G ATV15C780J(B)-G ATV15C800J(B)-G ATV15C850J(B)-G 83.30 86.70 88.80 94.40 92.10 95.80 97.60 104.00 1 1 1 1 1.0 1.0 1.0 1.0 75.0 78.0 80.0 85.0 12.40 11.90 11.57 10.95 121.0 126.0 129.6 137.0 GGR GGT GGB GGV BGR BGT BGB BGV ATV15C900J(B)-G ATV15C101J(B)-G ATV15C111J(B)-G ATV15C121J(B)-G 100.00 111.00 122.00 133.00 111.00 123.00 135.00 147.00 1 1 1 1 1.0 1.0 1.0 1.0 90.0 100.0 110.0 120.0 10.27 9.26 8.47 7.77 146.0 162.0 177.0 193.0 GGX GGZ GHE GHG BGX BGZ BHE BHG Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 3 AQW-BTV05 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (ATV15C5V0-G Thru. ATV15C441-G) Breakdown voltage VBR @ IT Part No. Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) UNI BI Device Marking Code Min. (V) Max. (V) IT (mA) ATV15C131J(B)-G ATV15C141J(B)-G ATV15C151J(B)-G ATV15C161J(B)-G 144.0 155.0 167.0 178.0 159.0 171.0 185.0 197.0 1 1 1 1 1.0 1.0 1.0 1.0 130.0 140.0 150.0 160.0 7.18 6.61 6.17 5.79 209.0 226.8 243.0 259.0 GHK GHB GHM GHP BHK BHB BHM BHP ATV15C171J(B)-G ATV15C181J(B)-G ATV15C191J(B)-G ATV15C201J(B)-G 189.0 200.0 211.0 224.0 209.0 220.0 232.0 247.0 1 1 1 1 1.0 1.0 1.0 1.0 170.0 180.0 190.0 200.0 5.45 5.14 4.87 4.60 275.0 291.6 307.8 324.0 GHR GHT GHV GHW BHR BHT BHV BHW ATV15C221J(B)-G ATV15C251J(B)-G ATV15C301J(B)-G ATV15C351J(B)-G 246.0 279.0 335.0 391.0 272.0 309.0 371.0 432.0 1 1 1 1 1.0 1.0 1.0 1.0 220.0 250.0 300.0 350.0 4.20 3.70 3.10 2.60 356.0 405.0 486.0 567.0 GHX GHZ GJE GJG BHX BHZ BJE BJG ATV15C401J(B)-G ATV15C441J(B)-G 447.0 492.0 494.0 543.0 1 1 1.0 1.0 400.0 440.0 2.30 2.10 648.0 713.0 GJK GJM BJK BJM Note: 1) Suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 4 AQW-BTV05 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Reel Taping Specification d P0 P1 T E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DO-214AB (SMC) DO-214AB (SMC) SYMBOL A B C d D D1 D2 (mm) 6.05 ± 0.10 8.31 ± 0.10 3.29 (max) 1.55 ± 0.10 330.00 50.00 (min) 13.00 ± 0.20 (inch) 0.238 ± 0.004 0.327 ± 0.004 0.130 (max) 0.061 ± 0.004 13.000 1.969 (min) 0.512 ± 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 7.50 ± 0.10 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 16.00 ± 0.30 22.40 (max) (inch) 0.069 ± 0.004 0.295 ± 0.004 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.630 ± 0.012 0.882 (max) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 5 AQW-BTV05 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Marking Code 2 1 1. C: COMCHIP 2. ○: Package C PKG A SMA B SMB C SMC 4 XXX 3 3. XXX: Marking code (see Page. 3~4) :Cathod Band 4. Suggested PAD Layout A DO-214AB(SMC) SIZE (mm) (inch) A 8.13 0.320 B 4.69 MAX 0.185 MAX C 1.52 MIN 0.06 MIN D 3.20 MIN 0.126 MIN B D C Standard Packaging REEL PACK Case Type DO-214AB (SMC) REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 6 AQW-BTV05 Comchip Technology CO., LTD.