EMI MEX Series Class-X2/310VAC/275VAC -X2/310Vac/275Vac FEATURES UL E197475 VDE 40034870 • 10mm to 27.5mm lead pitch • Self -healing properties • High moisture resistance • Over-voltage stress withstanding • UL/CSA and European safety regulations class X2 • Flame retardant plastic case and epoxy resin (UL 94V -0) SPECIFICATIONS 1. 2. 3. 4. 5. o Operating temperature: Capacitance range: Capacitance tolerance: Rated voltage: Dissipation factor: MEX are constructed with special metallized polypropylene film dielectric, tinned copper wire leads, encapsulated in plastic case with a noninductive epoxy resin seal. They are ideal for line bypass, across the line, antenna coupling, spark killer circuits, switching power supply and EMI filter applications o -40 C to +110 C 0.001μF to 2.2μF ±5%(J), ±10%(K), ±20%(M) 310VAC/275 VAC, 50/60Hz 1.0% max. at 1KHz, 25oC >15,000MΩ (C ≤ 0.33μF) 6. Insulation resistance: (Measured after charging 100 ±15VDC for 1minute) 7. Withstand voltage: Between Terminals: Between terminals and Enclosure: >5,000MΩ ÷C(μF) (C>0.33μF) 2000VDC Test Of 1～5sec UR×200％+1500VAC, 60sec PART NUMBERING SYSTEM MEX 474 K 310VAC Meritek Series Capacitance Capacitance expressed in Pico farads (pF). First two digits are significant figures. Third digit denotes number of zero. Tolerance: K=±10% Rated Voltage: 310VAC *Notes: A suffix may be added to denote custom features RECOMMENDED DIMENSIONS SIZE UF 0.001 0.0022 0.0047 0.0056 0.0068 0.0082 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.082 CODE 102 222 472 562 682 822 103 153 223 333 473 563 683 823 W 12 12 12 12 12 12 12 12 12 12 12 18 13 18 CASE SIZE/MM H T P 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 10 11 5 15 12 6 10 12 6 15 SIZE D 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 UF 0.1 0.1 5 0.22 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 2.2 CODE 104 154 224 334 394 474 564 684 824 105 125 155 225 W 18 18 26.5 26.5 26.5 26.5 26.5 32 26.5 32 32 32 32 CASE SIZE/MM H T P 12 6 15 14.5 8.5 15 6.5 7.0 22.5 17 8.5 22.5 17 8.5 22.5 19 10 22.5 19 10 22.5 20 11 27.5 19 10 22.5 22.5 13 27.5 22.5 12 27.5 22.5 12 27.5 28 18 27.5 D 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 *Note: Customized Dimension will be available upon request rev.7b EMI MEX Series Class-X2/310VAC/275VAC SPECIFICATIONS - (IEC60384-14) Item Withstand voltage Insulation resistance Capacitance Dissipation factor (D.F.) Tense strength of terminal Bending strength of terminal Characteristics shall be no abnormally CR≤0.33uF, I.R. ≥ 15,000MΩ CR>0.33uF, I.R. ≥ 5,000MΩ÷C(μF) within the tolerance specified 0.1%, max. No wire breakage and no damage of capacitor Vibration Appearance : no visible damage Contact : normal Solder-ability 95% of the surface tinning Heat shock test Cold resistance Dry heat resistance Humidity resistance Appearance : no visible damage Withstand voltage : normal Capacitance change : ≤ ±3% of the initial value Appearance : no visible damage Capacitance change : ≤ 0 ~ -10% of the initial value Appearance : no visible damage Withstand voltage : normal Capacitance change : ≤ +5% ~ -2% of the initial value Insulation resistance : ≥ 50% of the rated value Appearance : no visible damage Withstand voltage : normal Capacitance change : ≤ ±1% of the initial value Insulation resistance : ≥ 50% of the rated value DF(tanδ) ≤ 0.001 Condition between terminals, VRx430%(DC), 60seconds terminal to enclosure, VRx200%+1,500VAC, 60seconds between terminals, applied 100±15VDC, 60seconds circumstance temperature : 25ºC 1kHz, 1.0Vrms,max. circumstance temperature : 25ºC Load force: 1.0kg, holding time: 10±1.0second Load force: 0.5kg, bending condition: 4x90ºin 5 seconds Frequency condition : - 1min./cycle, 10~55~10Hz Vibration distance : 1.5mm Course : X,Y,Z (axis) Duration : 2 hours/axis ( 6 hours in total) Solder temperature : 270±5ºC Solder time : 2.0±0.5seconds The terminal shall be immersed in the melting solder. - soldering temperature : 270±5ºC - solder time : 3.0±0.5seconds Test temperature: -40ºC Duration : 2 hours Test temperature: 110±2ºC Duration : 2 hours Test temperature: 40±2ºC Relative humidity: 90%~95% Duration: 500±24hours Heat resistance (charge & discharge) Appearance : no visible damage DF(tanδ) ≤ 0.001 Capacitance change : ≤ ±10% of the initial value Insulation resistance : ≥ 50% of the rated value Test voltage : - rated voltage charge for 2 seconds - discharge for 2 seconds - for 1000±100 cycles Test temperature: 110±2ºC Heat resistance (continuous) Appearance : no visible damage DF(tanδ) ≤ 0.002 Capacitance change : ≤ ±10% of the initial value Insulation resistance : ≥ 50% of the rated value Test voltage : 125% of the rated voltage for 1000Vrms for 0.1second every one hour during test Test temperature: 110±2ºC Duration: 1008±24hours rev.7b