Meder Electronic MK1 Series Surface Mount Reed Sensors DESCRIPTION The MK1 sensor offers a selection of magnetically operated Reed proximity switches with J-lead connections for SMD mounting. The sensors are provided in the standard 32 mm tape according to IEC 286 / part 3. Several AT ranges for the Pull-in / Drop-out sensitivities are available. Low profile packaging with a height of only 3.25 mm. FEATURES • Surface Mount Design • Form C available • High power switches available • Four operate sensitivities available APPLICATIONS • Telecommunications Hook switch sensor in mobile phones • Microphones On/off control switch • Electronic PCB’s where all components are surface mounted • Connection detection in battery chargers • Position detection DIMENSIONS SCHEMATIC DRAWING All dimensions in mm [inches] ORDER INFORMATION SENSIT IVITY CLASS PULL IN AT RANGE B 10 - 15 C 15 - 20 D 20 - 25 E 25 - 30 SERIES MAGNETIC SENSITIVIT Y MK1 - X OPTIONS B, C, D, E Part Number Example MK1 - B B is the magnetic sensitivity class www.willow.co.uk Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306 MK1 Series Meder Electronic Surface Mount Reed Sensors TAPE & REEL All dimensions in mm [inches] SOLDERING INFORMATION All dimensions in mm [inches] Recommended Pad Layout www.willow.co.uk Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306 Meder Electronic MK1 Series Surface Mount Reed Sensors CONTACT DATA All data at 20 0 C Contact Form --> Contact Ratings Conditions Form A Min. Typ. Max. Units Contact Rating Any DC combination of V & A not to exceed their individual max.'s 10 W Switching Voltage DC or peak AC 200 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.25 A Static Contact Resistance w/ 0.5V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 200 mΩ Insulation Resistance across Contacts 100 Volts applied 1010 * Ω Breakdown Voltage across Contacts Voltage applied for 60 sec. min. 225 * VDC Operate Time, incl. Bounce Measured w/ 100% overdrive 0.5 ms Release Time Measured w/ no coil suppression 0.1 ms Capacitance @ 10kHz across contact 0.2 pF Contact Operation ** Must Operate Condition Steady state field 10 30 AT Must Release Condition Steady state field 04 27 AT Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 g Vibration Resistance From 10 - 2000 Hz 20 g Ambient Temperature 10 0 C/ minute max. allowable Storage Temperature Soldering Temperature 0 10 C/ minute max. allowable 5 sec. dwell -40 -50 130 0 130 0 260 0 C C C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation Resistance of 1012 and a Breakdown voltage of 480 VDC version is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.willow.co.uk Tel. +44 (0) 1342 835234 Fax. +44 (0) 1342 834306