PAM2401

A Product Line of
Diodes Incorporated
PAM2401
1.0MHz STEP-UP DC-DC CONVERTER
Pin Assignments
Description
The PAM2401 is a high efficiency, current mode, fixed frequency,
step-up DC/DC converter with true output disconnect and inrush
current limiting. The device includes one 0.10Ω N-channel MOSFET
switch and one 0.15Ω P-channel synchronous rectifier. This product
has the ability to simply program the output voltage from 2.5V to
NEW PRODUCT
5.0V.The switching frequency is 1.0MHz, programmable current limit
set by an external resistor from 1.0A to 3.0A with internal soft-start.
When loading became light, the converter will automatically enter into
PSM to improve the efficiency.
Quiescent current is only 150µA during Pulse Skip Mode operation,
maximizing battery life in portable applications. Other features include
: <1µA shutdown, anti-ringing control, Hiccup mode at short
protection, over voltage protection and over temperature protection.
The PAM2401 is available in MSOP-8 and U-DFN3030-12 packages
Features
•
Up to 95% Efficiency
•
True Output Disconnect
•
•
Inrush Current Limiting When Power On
Output Current up to 1000mA at VIN = 3V and VOUT = 5.0V
•
Fixed Frequency Operation Up to 1MHz
•
0.9V to 4.75V Input Range
•
2.5V to 5.0V Adjustable Output Voltage
•
Guaranteed 1.0V Start-Up
Applications
•
Programmable Current Limit
•
Internal Soft-Start
•
Handheld Computers
•
Internal Compensation
•
Cordless Phones
•
Pulse Sipping Mode at Light Load Operation
•
GPS Receivers
•
Hiccup Mode Short Protection
•
Battery Backup Supplies
•
Over Voltage Protection
•
Over Temperature Protection
•
<1µA Shutdown Current
•
Power Good Indicator
•
MSOP-8 and U-DFN3030-12 packages
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
PAM2401
Document number: DS37285 Rev. 1 - 2
1 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
NEW PRODUCT
Typical Applications Circuit
Pin Descriptions
MSOP-8
1
U-DFN3030-12
1,2
Name
LX
Switch Pin
Function
2
3
-4
5
6
3
4
5
6
7
8
EN
VIN
PG
AGND
FB
RSET
Enables Control Input.
Input Voltage Pin
Power Good Indicator Pin, Open Drain Output
Analog Ground
Feedback Pin Internally Set to 0.6V.
Current Limit Setting
7
8
9,10
11,12
Exposed Pad
OUT
PGND
EP
Output Pin
Power Ground
Thermal Pad of the Package. Can Be Connected to PGND
Functional Block Diagram
PAM2401
Document number: DS37285 Rev. 1 - 2
2 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
NEW PRODUCT
These are stress ratings only and functional operation is not implied. Exposure to absolute maximum ratings for prolonged time periods may
affect device reliability. All voltages are with respect to ground.
Parameter
Input Voltage
SW Voltage
SHDN, FB Voltage
Rating
-0.3 to +6.0
-0.3 to +6.0
-0.3 to +6.0
Unit
V
V
V
VOUT
-0.3 to +6.0
V
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 10 sec)
-40 to +85
-65 to +125
300
°C
°C
°C
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Parameter
Ambient Temperature Range
Junction Temperature Range
Rating
-40 to +85
-40 to +125
Unit
°C
Thermal Information
Parameter
Thermal Resistance
(Junction to Case)
Thermal Resistance
(Junction to Ambient)
Internal Power Dissipation
PAM2401
Document number: DS37285 Rev. 1 - 2
Package
MSOP-8
U-DFN3030-12
MSOP-8
U-DFN3030-12
MSOP-8
U-DFN3030-12
Symbol
ΘJC
ΘJC
PD
3 of 10
www.diodes.com
Max
75
8.5
180
60
0.55
1.66
Unit
°C/W
W
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Electrical Characteristics (TA = +25°C, VIN = 3.3V, VOUT = 5V, L = 2.2µH, unless otherwise noted.)
PARAMETER
SYMBOL
NEW PRODUCT
Input Voltage Range
VIN
Minimum Startup Voltage
VSTARTUP
Shutdown Supply Current
ISD
Quiescent Current
Iq
Oscillator Frequency
fOSC
Maximum Duty Cycle
DMAX
Output-Voltage Adjust Range
Test Conditions
0.9
IO =1A , VO = 5V
2.7
No load, switching (measured with
external feedback); VO = 5V
No Load
IOUT = 1mA to 1000mA
Line Regulation
LNR
0.588
µA
µA
1.2
0.6
VO = 2.5V to 4.75V, IO = 0.5A
0.3
150
100
MHz
%
5
P MOSFET
N MOSFET
V
0.612
V
%
%/V
250
170
3
mΩ
mΩ
A
RSET = 100KΩ
1.5
A
RSET = 66KΩ
1
A
500
mA
Pre-charge Current
I-Charge
VOUT +0.5V < VIN
Pre-charge Time
T-Charge
VOUT +0.5V < VIN
ILSW
VPG
EN Threshold Low
V
1
2.5
RSET Floating or RSET > 200KΩ
EN Threshold High
1
2.5
VFB
SW Leakage Current
Power Good Threshold
V
87.5
LDR
ILIMIT
Units
150
0.8
Load Regulation
N-Channel Current Limit (Note)
Max
4.75
4.75
0.1
VO
RDS(ON)
Typ
1
IO = 0.1A, VO = 3.3V
FB Regulation Voltage
Drain-Source On-State Resistance
Min
No load, VO = 5V
400
0.1
µs
2
µA
%
92
VH
VIN = 0.9V
0.8
VH
VIN = 3.3V
1.5
VL
VIN > 1.2V
V
0.2
V
Over Temperature Threshold
TOTSD
160
°C
Over Temperature Hysteresis
THYS
50
°C
Note:
N-Channel current limit is guaranteed by design.
PAM2401
Document number: DS37285 Rev. 1 - 2
4 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Application Information
Output Voltage Set Equation
The output voltage of the PAM2401, VOUT, is set by an external resistor divider from VOUT to ground as shown in figure 1. The divider tap is
connected to the FB pin and the typical value of the voltage at the FB pin is 0.6V. The following equation is used to set the
VOUT: VOUT = 0.6 (1+R1/R2) For example, if output voltage of 5V is needed, with a chosen R2 value of 100kΩ ,the value of R1 can be calculated
NEW PRODUCT
according to the equation, so a 750kΩ resistor should be chosen for R1.
Inductor Selection
To select an inductor for use in PAM2401 applications, it is worth noting that the inductor current saturation rating should be larger than the
possible peak inductor current to ensure proper operation, and should have low DCR (DC resistance). Using an inductor the saturation current of
which is lower than required can cause a dramatic drop in the inductance and can decay the maximum output current levels severely. For most
applications, the value of the inductor should be in the range ofs 1µH to 4.7µH. Its value is chosen based on the desired ripple current.
Larger value inductors result in lower ripple currents, and smaller value inductors result in higher ripple currents. A 1.5µH or 2.2µH inductor will be
the best choice for most PAM2401 applications. The following equation can also help give a good approximate value for the inductor.
L=
V INxD
Δ ILxf
D Duty Cycle=1-VIN/VOUT, F Switching Frequency = 1.0MHz, ∆IL Ripple Current in the Inductor, i.e., 20% to 40% of the maximum inductor current
(Ip).
Output and Input Capacitor Selection
Input Capacitor
At least a 10µF input capacitor is recommended to reduce the input ripple and switching noise for normal operating conditions, while a 10-22µF
capacitor may be required for higher power and dynamic loads. Larger values and lower ESR (Equivalent Series Resistance) may be needed if
the application require very low input ripple. It follows that ceramic capacitors are a good choice for applications. Note that the input capacitor
should be located as close as possible to the IC.
Output Capacitor
A minimum output capacitor value of 22µF is recommended and may be increase to a larger value. The ESR of the output capacitor is important
because it determines the peak to peak output voltage ripple by the following equation:
ΔV OUT >> 2Δ IL xRESR
Multilayer ceramic capacitors are an excellent choice as they have extremely low ESR and are available in small footprints.
PAM2401
Document number: DS37285 Rev. 1 - 2
5 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
95
90
90
85
85
Efficiency (%)
100
95
Efficiency (%)
100
80
75
70
80
75
70
65
65
Vin=3.3V
Vin=4.5V
60
55
50
0
100
200
300
400
500
600
700
800
Vin=3.3V
Vin=4.5V
60
55
900
50
1000
0
100
200
300
Output Current (mA)
Maximun Output Current Ability (mA)
5.35
5.30
Output Voltage (V)
5.25
5.20
5.15
5.10
5.05
5.00
4.95
4.90
4.85
Vin=3.3V
Vin=4.5V
4.75
4.70
100
200
300
400
500
600
700
800
900
1000
2000
1800
1600
1400
1200
1000
Vout=3.3V
Vout=3.6V
Vout=4.2V
vout=5V
test on steady state
800
600
400
200
0
600
2200
4.65
4.60
500
Figure 5 Efficiency vs. Output Current (U-DFN)
5.40
4.80
400
Output Current (mA)
Figure 4 Efficiency vs. Output Current (MSOP-8)
700
800
900
0
0.5
1000
Output Current (mA)
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Input Voltage (V)
Figure 6 Output Voltage vs. Output Current
Figure 7 Maximum Output Current vs. Input Voltage
3.2
160
Dynamic Supply Current (uA)
3.0
Inductor Current limit (A)
NEW PRODUCT
Typical Performance Characteristics (TA = +25°C, VIN = 3.3V, VOUT = 5V, unless otherwise noted.)
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
150
140
130
120
110
Vin=3.3V, Vo=5V
1.0
Vin=4.5V,Vo=5V,Io=0A
100
0.8
0.6
50
60
70
80
90
90
-40 -30 -20 -10
100 110 120 130 140 150 160 170 180 190
RSET Resistance (Kohm)
Document number: DS37285 Rev. 1 - 2
10 20 30 40 50 60 70 80 90 100 110 120
Temperature (oC)
Figure 8 Inductor Current Limit vs. RSET Resistance
PAM2401
0
Figure 9 Dynamic Supply Current vs. Temperature
6 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Typical Performance Characteristics (cont.) (TA = +25°C, VIN = 3.3V, VOUT = 5V, unless otherwise noted.)
Minimum startup input voltage(V)
NEW PRODUCT
2.6
Vo=3.3V
Vo=3.6V
Vo=4.2V
Vo=5V
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0
100
200
300
400
500
600
700
Output Current(mA)
800
900
1000 1100
Figure 10 Minimum Startup Input Voltage vs. Output Current
Figure 11 Enable Turn On (IO = 1A)
(CH1: Enable; CH2: VOUT; CH3:SW; CH4: IO)
Figure 12 Enable Turn Off (IO = 1A)
(CH1: Enable; CH2:VOUT; CH3:SW; CH4:Io)
Figure 13 Output Ripple (IO = 0A)
(CH1:SW; CH2: VOUT-AC; CH4:IL)
Figure 14 Output Ripple (IO = 0.2A)
(CH1: SW; CH2:VOUT-AC; CH4:IL)
Figure 15 VOUT Short Protection (IO = 1A)
(CH2:VOUT; CH3:IL)
Figure 16 VOUT Short Recovery (IO = 1A)
(CH2: VOUT; CH3: IL )
PAM2401
Document number: DS37285 Rev. 1 - 2
7 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Ordering Information
PAM2401 X X XXX
NEW PRODUCT
Package Type
S: MSOP-8
Y: U-DFN3030-12
Part Number
PAM2401SCADJ
PAM2401YPADJ
Marking
P2401
XXXYW
P2401
XXXYW
Number of Pins
C: 8
P: 12
Output Voltage
ADJ: ADJ
Package Type
Standard Package
MSOP-8
2,500 units/ Tape & Reel
U-DFN3030-12
3,000 units/ Tape & Reel
Marking Information
Top View
U-DFN3030-12
PAM2401
Document number: DS37285 Rev. 1 - 2
8 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(1)
MSOP-8
D
MSOP-8
Dim Min Max Typ
A
1.10
A1 0.05 0.15 0.10
A2 0.75 0.95 0.86
A3 0.29 0.49 0.39
b 0.22 0.38 0.30
c 0.08 0.23 0.15
D 2.90 3.10 3.00
E 4.70 5.10 4.90
E1 2.90 3.10 3.00
E3 2.85 3.05 2.95
e
0.65
L 0.40 0.80 0.60
a
0°
8°
4°
x
0.750
y
0.750
All Dimensions in mm
NEW PRODUCT
4x
10
°
0.25
E Gauge Plane
x
Seating Plane
a
y
4x10°
L
Detail C
1
b
E3
A3
A2
A
e
E1
A1
(2)
c
See Detail C
U-DFN3030-12
A3
A
U-DFN3030-12
Dim Min Max Typ
A
0.57 0.63 0.60
A1
0
0.05 0.02
A3
0.15
⎯
⎯
b
0.18 0.28 0.23
D
2.90 3.10 3.00
D2 2.30 2.50 2.40
e
0.45
⎯
⎯
E
2.90 3.10 3.00
E2
1.50 1.70 1.60
L
0.25 0.55 0.40
All Dimensions in mm
SEATING PLANE
A1
D
D2
Pin#1 ID
E E2
L
e
b
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1)
MSOP-8
X
C
Dimensions Value (in mm)
C
0.650
X
0.450
Y
1.350
Y1
5.300
Y
Y1
PAM2401
Document number: DS37285 Rev. 1 - 2
9 of 10
www.diodes.com
May 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
PAM2401
Suggested Pad Layout (cont.)
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(2)
U-DFN3030-12
Y
C
Dimensions Value (in mm)
Z
2.60
G
0.15
X
1.80
X1
0.60
Y
0.28
C
0.45
NEW PRODUCT
X1
G
X
G
Z
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
PAM2401
Document number: DS37285 Rev. 1 - 2
10 of 10
www.diodes.com
May 2014
© Diodes Incorporated