AH1808

AH1808
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH1808 is a high-sensitivity, micropower Omnipolar Hall Effect
switch IC. It is designed for portable and battery powered consumer
equipment, home appliances and industrial equipment such as smartmeter magnetic-tamper detection. Based on two sensitive Hall effect
plates and a chopper stabilized architecture, the AH1808 provides a
reliable solution over the whole operating range. To support portable
and battery powered equipment, the design is optimized to operate
over the supply range of 2.5V to 5.5V and consumes only 24µW with
a supply of 3V.
TOP View)
SC59
The single open drain output can be switched on with either a North
or South pole of sufficient strength. When the magnetic flux density
(B) perpendicular to the package is larger than operate point (Bop),
the output is switched on (pulled low). The output is turned off when
B becomes lower than the release point (Brp). The output will remain
off when there is no magnetic field.
(TOP View)
Features
•
•
•
•
•
•
•
•
•
•
•
•
SOT553
Omnipolar (North or South pole) Operation
High Sensitivity
Single Open Drain Output
Micropower Operation
2.5V to 5.5V Operating Range
Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
ESD (HBM) > 6KV
Small Low Profile SOT553 and Industry Standard SC59 and SIP-3
Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
SIP-3
Applications
•
Doors, Lids, Covers and Trays Position Detect Switches
•
Display Switch for Portable PCs and Tablets
•
•
•
•
On/Off Switch for PDAs and Digital Cameras
Liquid Level Detection for Coffee Machines
Smart Meters
Position, Proximity and Level Detection Contact-Less Switch in
Battery Powered Consumer, Home Appliances and Industrial
Applications
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AH1808
Document number: DS35655 Rev. 6 - 2
1 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Typical Applications Circuit
Note:
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF to 100nF.
RL is the pull-up resistor, the recommended resistance is 10kΩ to 100kΩ.
Pin Descriptions
Package: SC59 and SIP-3
Pin
Number
Pin
Name
1
VDD
2
3
GND
OUTPUT
Function
Power Supply Input
Ground
Output
Package: SOT553
Pin
Number
Pin
Name
1
2
3
NC
GND
NC
Note:
4
VDD
5
OUTPUT
Function
No Connection (Note 5)
Ground
No Connection (Note 5)
Power Supply Input
Output
5. NC is “No Connection” pin and is not connected internally. This pin can be left open or tied to ground.
Functional Block Diagram
AH1808
Document number: DS35655 Rev. 6 - 2
2 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Absolute Maximum Ratings (Note 6) (@TA = +25°C, unless otherwise specified.)
Symbol
Values
Unit
VDD
Supply Voltage (Note 7)
7
V
VOUT
Output Pin Voltage (Note 7)
7
V
Reverse Supply Voltage
-0.3
V
VOUT_REV
Reverse Output Pin Voltage
-0.3
V
IOUTPUT
Output Current (source and sink)
2.5
mA
VDD REV
B
Parameter
Magnetic Flux Density
Package Power Dissipation
PD
Ts
Storage Temperature Range
TJ
Maximum Junction Temperature
ESD HBM
Notes:
Unlimited
230
230
-65 to +150
SC59 and SOT553
SIP-3
Human Body Model ESD capability
mW
mW
°C
+150
°C
6
kV
6. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may
be affected by exposure to absolute maximum rating conditions for extended periods of time.
7. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
VOUT_MAX
TA
Rating
Unit
Supply Voltage
Characteristic
Operating
Conditions
2.5 to 5.5
V
Maximum Output Pin Voltage
Operating
5.5
V
Operating Temperature Range
Operating
-40 to +85
°C
Electrical Characteristics (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
VOUT_ON
Ioff
Characteristic
Output On Voltage
Output Leakage Current
IDD(awake)
Supply Current
IDD(sleep)
IDD(sleep)
IDD(avg)
Average Supply Current
Tawake
Tperiod
D.C.
Awake Time
Period
Duty Cycle
Note:
Min
Typ
Max
Unit
IOUT = 1mA
Conditions
—
0.1
0.3
V
VOUT = 5.5V, Output off
—
< 0.1
1
µA
During ‘awake’ period,
TA = +25°C, VDD = 3V
—
3
6
mA
During ‘awake’ period,
TA = -40°C to +85°C, VDD = 2.5V to 5.5V
—
3
12
mA
—
5
10
µA
—
—
28
µA
During ‘sleep’ period,
TA = +25°C, VDD = 3V
During ‘sleep’ period,
TA = -40°C to +85°C, VDD = 2.5V to 5.5V
TA = +25°C, VDD = 3V
—
8
16
µA
TA = -40°C to +85°C, VDD = 2.5V to 5.5V
—
—
40
µA
(Note 8)
(Note 8)
—
—
—
75
75
0.1
125
125
—
µs
ms
%
—
8. When power is initially turned on, the operating VDD must be within its correct operating range (2.5V to 5.5V) to guarantee the output sampling.
The output state is valid after the second operating cycle (typical 150ms).
AH1808
Document number: DS35655 Rev. 6 - 2
3 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Magnetic Characteristics (Notes 9 & 10) (@TA = -40°C to +85°C, VDD = 2.5V to 5.5V, unless otherwise specified.)
Symbol
Bops (south pole to part marking side)
Bopn (north pole to part marking side)
Brps (south pole to part marking side)
Brpn (north pole to part marking side)
Bhy (|Bopx|-|Brpx|)
Notes:
Characteristic
Operation Point
Release Point
Hysteresis (Note 11)
Min
Typ
(1mT=10 Gauss)
Max
Unit
20
40
60
-60
10
-50
5
-40
30
-30
10
-20
50
-10
—
Gauss
9. Typical data is at TA = +25°C, VDD = 3V, and for design information only.
10. Maximum and minimum parameters values over the operating temperature range are not tested in production, they are guaranteed by design,
characterization and process control. The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
11. Maximum and minimum hysteresis is guaranteed by design and characterization.
AH1808
Document number: DS35655 Rev. 6 - 2
4 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Thermal Performance Characteristics
(1)
Package type: SC59, SOT553 and SIP-3
TA (°°C)
25
50
60
70
80
85
90
100
110
120
130
140
150
PD (mW)
230
184
166
147
129
120
110
92
74
55
37
18
0
PD (mW)
Power Dissipation Curve
300
200
100
0
0
25
-40
50
75
85
100
125
150
TA (oC)
Ordering Information
Bulk
Device
Package
Code
Packaging
AH1808-P-A
AH1808-P-B
AH1808-W-7
AH1808-Z-7
P
P
W
Z
SIP-3
SIP-3
SC59
SOT553
Notes:
Quantity
Part
Number Suffix
NA
1,000
NA
NA
NA
-B
NA
NA
7” Tape and Reel
Ammo Box
Part
Part
Quantity
Quantity
Number Suffix
Number Suffix
NA
NA
3,000/Tape & Reel
3,000/Tape & Reel
NA
NA
-7
-7
4,000/Box
NA
NA
NA
-A
NA
NA
NA
12. Ammo Box is for SIP-3L Spread Lead.
13. Bulk is for SIP-3L Straight Lead.
AH1808
Document number: DS35655 Rev. 6 - 2
5 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Marking Information
(1)
(2)
Package Type: SC59
Part Number
Package
Identification Code
AH1808
SC59
J8
Package Type: SOT553
Part Number
AH1808
(3)
Package
SOT553
Identification Code
J8
Package Type: SIP-3
AH1808
Document number: DS35655 Rev. 6 - 2
6 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(1)
Package Type: SC59
A
SC59
Min
Max
Typ
0.35
0.50
0.38
B
1.50
1.70
1.60
C
2.70
3.00
2.80
D
0.95
G
1.90
H
2.90
3.10
3.00
J
0.013 0.10
0.05
K
1.00
1.30
1.10
L
0.35
0.55
0.40
M
0.10
0.20
0.15
N
0.70
0.80
0.75
0°
8°
α
All Dimensions in mm
Dim
A
B C
G
H
K
J
M
N
D
L
Sensor Location
AH1808
Document number: DS35655 Rev. 6 - 2
7 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Package Outline Dimensions (Continued) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(2)
Package Type: SOT553
D
e1
E1/2
e
E/2
E1
E
L (5x)
F
R0.1 MAX.
TYP.
b (5x)
c
a
SOT553
Dim
Min
Max
Typ
A
0.55
0.62
0.60
b
0.15
0.30
0.20
c
0.10
0.18
0.15
D
1.50
1.70
1.60
E
1.55
1.70
1.60
E1
1.10
1.25
1.20
e
0.50 BSC
e1
1.00 BSC
F
0.00
0.10
––
L
0.10
0.30
0.20
a
6°
8°
7°
All Dimensions in mm
7°
A
TYP.
Sensor Location
AH1808
Document number: DS35655 Rev. 6 - 2
8 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Package Outline Dimensions (Cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(3)
Package Type: SIP-3 for Bulk Pack
L
a1
J
a2
B
SIP-3
for Bulk Pack Only
Dim
Min
Max
A
3.9
4.3
a1
5° Typ
a2
5° Typ
a3
45° Typ
a4
3° Typ
B
2.8
3.2
C
1.40
1.60
D
0.33
0.432
E
0.40
0.508
F
0
0.2
G
1.24
1.30
H
2.51
2.57
J
0.35
0.43
L
14.0
15.0
N
0.63
0.84
P
1.55
All Dimensions in mm
P
N
D
C
a3
A
E
a4
G H
F
Min/Max
0.63/0.84
0.27/0.48
1.90/2.10
1.6/1.8
PART
MARKING
SURFACE
Hall Sensor
1
2
PART
MARKING
SURFACE
3
Sensor location (TBD)
AH1808
Document number: DS35655 Rev. 6 - 2
9 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Package Outline Dimensions (Cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(4)
Package Type: SIP-3 for Ammo Pack
EF
N
D
C
A
G
a1
a2
B
P
SIP-3
for Ammo Pack only
Dim
Min
Max
A
3.9
4.3
a1
45° Typ
a2
3° Typ
B
2.8
3.2
C
1.40
1.60
D
0.35
0.41
E
0.43
0.48
F
0
0.2
G
2.4
2.9
N
0.63
0.84
P
1.55
All Dimensions in mm
Sensor location (TBD)
AH1808
Document number: DS35655 Rev. 6 - 2
10 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1)
Package Type: SC59
Y
Z
C
X
(2)
Dimensions Value (in mm)
Z
3.4
X
0.8
Y
1.0
C
2.4
E
1.35
E
Package Type: SOT553
C2
Z
C2
C1
G
Y
X
AH1808
Document number: DS35655 Rev. 6 - 2
Dimensions Value (in mm)
Z
2.2
G
1.2
X
0.375
Y
0.5
C1
1.7
C2
0.5
11 of 12
www.diodes.com
February 2015
© Diodes Incorporated
AH1808
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
AH1808
Document number: DS35655 Rev. 6 - 2
12 of 12
www.diodes.com
February 2015
© Diodes Incorporated