RX1500/1501

Product Overview
RUGGEDCOM RX1500/1501
Utility Grade Layer 2/3 Switch and Router
The RUGGEDCOM RX1500 series from Siemens is a cost
efficient utility grade layer 2 /3 switch and router. The
RX1500’s modular and field replaceable platform allows
customers to select amongst WAN, serial, and Ethernet
options making it ideally suited for electric power utilities,
rail and traffic control systems, and the industrial plant floor.
The RX1500 series consists of the RX1500 and the RX1501,
both of which are 1U 19” rack mounted devices that feature
modular, field replaceable, multi-service platforms with
integrated cyber security. The RX1500 provides for two
(2) redundant load sharing power modules and four (4)
line module slots while the RX1501 provides one (1)
power –module and six (6) line module slots. The versatility
and wide selection of power modules and line modules,
including an Application Process Engine (APE) to create a
utility-grade processing platform, allows the RX1500 series
to be used in a variety of applications.
enclosure allows the RX1500 to be placed in almost
any location.
The embedded ROX II (Rugged Operating System on Linux)
combines Layer 2 switching functions, Layer 3 routing
functions, along with advanced cyber security features
and comprehensive networking functions to provide a full
array of intelligent functionality for high network availability
and manageability. Coupled with the with ruggedness and
durability that is designed in from the onset, the RX1500
is ideal for creating mission-critical, real-time, control
applications where high reliability and availability is of
paramount importance.
All RUGGEDCOM products are backed by a five year warranty
and unsurpassed technical support.
Designed to operate reliably in harsh environments, the
RX1500 series provides a high level of immunity to
electromagnetic interference (EMI) and heavy electrical
surges. An operating temperature range of -40°C to +85°C
coupled with hazardous location compliance (Class 1
Division 2) optional conformal coating and an aluminum
usa.siemens.com/ruggedcom
Features and Benefits
Security Appliance Functions
■ Integrated firewall
■ IPSec
■ VPN
■ HTTPS
■ Dead Peer Detection
■ Brute Force Attack Prevention
■ Multi-level passwords
■ SSH/SSL encryption
■ Enable/disable ports, MAC based port security
■ Port based network access control (802.1x)
■ VLAN (802.1Q) to segregate and secure network traffic
Physical Ports
■ Field replaceable line modules
■ Up to 36-ports 100FX
■ Up to 36-ports 10/100TX
■ Up to 8-ports Gigabit Ethernet
WAN Port Options
■ T1/E1 (channelized)
■ E1 75 Ohms via BNC
■ Cellular (HSPA / EVDO)*
■ 56K /64K DDS
■ RADIUS centralized password management
Serial Ports
■ SNMPv3 encrypted authentication and access security
■ Fully compliant EIA/TIA RS485, RS422, RS232
serial ports (software selectable) – RJ45 connectors
Rugged Rated for Reliability in Harsh
Environments
■ Immunity to EMI and high voltage electrical transients
- Meets IEEE 1613 (electric utility substations)
- Exceeds IEC 61850-3 (electric utility substations)
- Exceeds IEC 61800-3 (variable speed drive systems)
- Exceeds IEC 61000-6-2 (generic industrial)
- Exceeds NEMA TS-2 (traffic control equipment)
■ DNP, MODBUS
■ Raw socket mode support allows encapsulation
of any byte oriented serial protocol
Advanced Services
■ MPLS Static Label Support
■ MPLS Label Distribution Protocol (LDP)
■ -40°C to +85°C operating temperature (no fans)
■ Failsafe Output Relay: For critical failure or
error alarming
*Carrier approvals may be required
2
RUGGEDCOM RX1500 / 1501
Utility Grade Layer 2/3 Switch and Router
Features and Benefits
Protocols
Management Tools
■ WAN
- Frame Relay RFC 1490 or RFC 1294
■ Web-based, SSH, CLI management interfaces
- PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP
- Authentication
■ NETCONF
- Multilink PPP RFC 1990
- GOOSE messaging support
■ IP
- Routing: OSPF, BGP, IS-IS, RIPv1 and v2
- VRRPv2 and VRRPv3
- Traffic control, NTP Server, IP Multicast Routing
- L2TPv2 and L2TPv3
- DHCP Agent (Option 82 Capable)
- PIM-SM
Frame Relay Support
■ ISO and ITU compliant, network certified
■ ANSI T1.617 Annex D, Q.933 or LMI Local Signaling
■ SNMP v1/v2/v3
■ Remote Syslog
■ Rich set of diagnostics with logging and alarms
■ Loopback diagnostic tests
■ Protocol analyzer with raw and interpreted real
time line traces
Universal Power Supply Options
■ Modular
■ Hot-Swappable (RX1500 only)
■ Fully integrated power supplies (no external adaptors)
■ Input voltage range of 9-72VDC, 88-300VDC,
and 85-264VAC for worldwide operability
■ CSA/UL 60950 safety approved to +85°C
USB Mass Storage
■ Configure ROX II from the USB
■ Upgrade/Downgrade Firmware
■ Backup Files
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1500 / 1501
3
RUGGEDCOM RX1500
Multiple Ethernet Ports
Modular
WAN ports
„Up to 24-ports 100FX
„Up to 24-ports 10/100TX
„Up to 8-ports Gigabit
Ethernet
„Up to 12 ports 10FL / 100SX
„SC, ST, LC and MTRJ
„Pluggable Optics (SFP)
„All modules are
field replaceable
„ Up to 4 T1/E1 ports
„ Cellular (EVDO / HSPA)*
„ DDS (56K Master/Slave,
64K Slave)
Serial Ports
„Up to 24 RS232/422/485
Hot Swappable
Power Supply
„ 24VDC (15 -36 VDC)
„48VDC (36-72 VDC) or
„HI (88-300VDC / 85-264 VAC)
„Redundant load sharing
power supplies
* Carrier approvals may be required
Enclosure
Operating Temperature
Mounting Options
„ IP 40
„ Aluminum
„ -40°C to +85°C
„No Fans
„ Panel Rail
„19” Rack Mount
EMI Immunity
„Meets IEEE 1613 (electric utility substations)
„ Exceeds IEC 61850-3 (electric utility substations)
„ Exceeds IEC 61800-3 (variable speed drive systems)
„ Exceeds IEC 61000-6-2 (generic industrial environment)
„ Exceeds NEMA TS-2 (traffic control equipment)
4
RUGGEDCOM RX1500 / 1501
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1501
Power Supply
„ 24VDC (15–36VDC)
48VDC (36–72VDC)
HI (88-300VDC /
85-264 VAC) power
supply options
Multiple
Ethernet Ports
„Up to 36-ports 100FX
„Up to 36-ports 10/100TX
„Up to 18-ports 10FL /
100SX
„Up to 4-ports Gigabit
Ethernet
„SC, ST, LC and MTRJ
„Pluggable optics (SFP)
Serial Ports
Modular
„Up to 24 RS232/422/485
„ All modules are field replaceable
WAN Ports
„ Up to 4 T1/E1 ports
„Cellular (EVDO / HSPA)*
„DDS (56K Master/Slave, 64K Slave)
* Carrier approvals may be required
Enclosure
Operating Temperature
Mounting Options
„ IP 40
„ Aluminum
„ -40°C to +85°C
„No Fans
„ Panel Rail
„19” Rack Mount
EMI Immunity
„Meets IEEE 1613 (electric utility substations)
„Exceeds IEC 61850-3 (electric utility substations)
„Exceeds IEC 61800-3 (variable speed drive systems)
„Exceeds IEC 61000-6-2 (generic industrial environment)
„Exceeds NEMA TS-2 (traffic control equipment)
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1500 / 1501
5
ROX II Features
ROX II Software Features
■ Simple plug and play operation – automatic learning,
negotiation, and crossover detection
■ Telecom Standard Command Line Interface (CLI)
■ Single File Configuration ensures easy installation and
configuration control
■ Automatic rollback in the event of configuration
errors (configurable)
■ NETCONF configuration interface supports powerful
remote configuration and status features.
■ VLAN (802.1Q)
■ Port rate and broadcast storm limiting
■ Port configuration, status, statistics, mirroring
■ SNTP time synchronization (client and server)
■ MSTP 802.1Q-2005 (formerly 802.1s)
■ RSTP (802.1w) and Enhanced Rapid Spanning Tree
(eRSTP) network fault recovery (<5ms)
■ Quality of Service (802.1p) for real-time traffic
■ Traffic control
■ SNMP v1, v2c and v3 support including RMON
■ Zone based stateful firewall
■ RIP v1/2
■ OSPF
■ BGP
■ IS-IS
Cyber Security
Cyber security is an urgent issue in many industries where
advanced automation and communications networks play
a crucial role in mission critical applications and where high
reliability is of paramount importance. Key ROX II features
that address security issues at the local area network
level include:
Passwords – Multi-level user passwords secure against
unauthorized configuration
SSH / SSL – Extends capability of password protection to
add encryption of passwords and data as they cross
the network
Enable / Disable Ports – Capability to disable ports so that
traffic can not pass
802.1Q VLAN – Provides the ability to logically segregate
traffic between predefined ports on switches
SNMPv3 – Encrypted authentication and access security
HTTPS – For secure access to the web interface Enhanced
Firewall – Integrated stateful firewall provides protected
network zones
VPN/IPSEC – Allows creation of secure encrypted and
authenticated tunnels
Enhanced Rapid Spanning Tree Protocol (eRSTP)
RUGGEDCOM eRSTP allows the creation of fault-tolerant
ring and mesh Ethernet networks that incorporate redundant
links that are ‘pruned’ to prevent loops. eRSTP yields worst-case
fault recovery1 of 5ms times the ‘bridge diameter’ and allows
rings of up to 160 switches. For example, a ring of ten switches
will have fault recovery times under 50ms. eRSTP implements
both STP and RSTP to ensure interoperability with commercial
switches unlike other proprietary ‘ring’ solutions. eRSTP also
provides fast and deterministic behavior for root bridge failure.
Quality of Service (IEEE 802.1p)
Some networking applications such as real-time control
or VoIP (voice over IP) require predictable arrival times for
Ethernet frames. Switches can introduce latency in times
of heavy network traffic due to the internal queues that
buffer frames and then transmit on a first come first
serve basis. ROX II supports ‘Class of Service’ that allows
time critical traffic to jump ahead to the front of the queue
thus minimizing latency and reducing jitter to allow such
demanding applications to operate correctly. ROX II allows
priority classification by port, tags, MAC address, and
IP type of service (ToS). A configurable “weighted fair
queuing” algorithm controls how frames are emptied from
the queues.
VLAN (IEEE 802.1Q)
Virtual Local Area Networks (VLAN) allow the segregation
of a physical network into separate logical networks with
independent broadcast domains. A measure of security is
provided since hosts can only access other hosts on the
same VLAN and traffic storms are isolated. ROX II supports
802.1Q tagged Ethernet frames and VLAN trunks. Port
based classification allows legacy devices to be assigned
to the correct VLAN. GVRP support is also provided to
simplify the configuration of the switches on the VLAN.
SNMP (Simple Network Management Protocol)
SNMP provides a standardized method, for network
management stations, to interrogate devices from different
vendors. SNMP versions supported by ROX II are v1,v2c,
and v3. SNMPv3 in particular provides security features (such
as authentication, privacy, and access control) not present
in earlier SNMP versions. ROX II also supports numerous
standard MIBs (Management Information Base) allowing for
easy integration with any network management system (NMS).
A feature of SNMP supported by ROX II is the ability to
generate “traps” upon system events. RUGGEDCOM NMS, the
RUGGEDCOM management solution, can record traps from
multiple devices providing a powerful network troubleshooting
tool. It also provides a graphical visualization of the network
and is fully integrated with all RUGGEDCOM products.
1 eRSTP fault recovery times may be approximated as follows:
For 100 Mbps, fault recovery performance is <5ms/hop
For 1,000 Mbps, fault recovery performance is <5ms/hop + 20ms
6
RUGGEDCOM RX1500 / 1501
Utility Grade Layer 2/3 Switch and Router
ROX II Features
NETCONF Configuration Interface
HTML Web Browser User Interface
The NETCONF configuration interface will allow administrators
to set device parameters and receive device updates through
the use of XML based commands. This standard, supported
by multiple vendors, makes it possible to greatly simplify the
task of network management.
ROX II provides a simple, intuitive user interface for
configuration and monitoring via a standard graphical
web browser or via standard telcom UI. All system
parameters include detailed on-line help to make setup
a breeze. ROX II presents a common look and feel and
standardized configuration process allowing easy
migration to other RUGGEDCOM managed products.
NTP (Network Time Protocol)
NTP automatically synchronizes the internal clock of all ROX II
devices on the network. This allows for correlation of time
stamped events for troubleshooting.
Port Rate Limiting
ROX II supports configurable rate limiting per port to limit
unicast, multicast, and broadcast traffic. This can be essential
to managing precious network bandwidth for service
providers. It also provides edge security for denial of service
(DoS) attacks.
Broadcast Storm Filtering
Broadcast storms wreak havoc on a network and can cause
attached devices to malfunction. This could be disastrous on a
network with mission critical equipment. ROX II limits this by
filtering broadcast frames with a user-defined threshold.
Port Mirroring
ROX II can be configured to duplicate all traffic on one port
to a designated mirror port. When combined with a network
analyzer, this can be a powerful troubleshooting tool.
Port Configuration and Status
ROX II allows individual ports to be ‘hard’ configured for
speed, duplex, auto-negotiation, flow control and more.
This allows proper connection with devices that do not
negotiate or have unusual settings. Detailed status of ports
with alarm and SNMP trap on link problems aid greatly in
system troubleshooting.
Port Statistics and RMON (Remote Monitoring)
ROX II provides continuously updating statistics per port
that provide both ingress and egress packet and byte
counters as well as detailed error figures. Also provided is
full support for the RMON statistics, history, alarms, and
event groups. RMON allows for very sophisticated data
collection, analysis and detection of traffic patterns.
Command Line Interface (CLI)
A command line interface used in conjunction with remote
shell to automate data retrieval, configuration updates,
and firmware upgrades. A powerful Telecom Standard style
Command Line Interface (CLI) allows expert users the ability
to selectively retrieve or manipulate any parameters the
device has to offer.
Link Backup
Link backup provides an easily configured means of raising
a backup link upon the failure of a designated main link.
The main and backup links can be Ethernet, Cellular, T1/
E1 or DDS. The feature can back up to multiple remote
locations, managing multiple main: backup link relationships.
The feature can also back up a permanent high speed WAN
link to a permanent low speed WAN link and can be used to
migrate the default route from the main to the backup link.
OSPF (Open Shortest Path First)
OSPF is a routing protocol that determines the best path for
routing IP traffic over a TCP/IP network based on link states
between nodes and several quality parameters. OSPF is an
interior gateway protocol (IGP), which is designed to work
within an autonomous system. It is also a link state protocol,
meaning that the best route is determined by the type and
speed of the inter-router links, not by how many router
hops they are away from each other (as in Distance-Vector
routing protocols, i.e. Rip and RIP II).
BGP (Border Gateway Protocol)
BGPv4 is a path vector routing protocol where routing
decisions are made based on the policies or rules laid out
by the network administrator. It is typically used where
networks are multihomed between multiple Internet service
providers, or in very large internal networks where internal
gateway protocols do not scale sufficiently.
Event Logging and Alarms
ROX II records all significant events to a non-volatile system
log allowing forensic troubleshooting. Events include link
failure and recovery, unauthorized access, broadcast storm
detection, and self-test diagnostics among others. Alarms
provide a snapshot of recent events that have yet to be
acknowledged by the network administrator. An external
hardware relay is de-energized during the presence of
critical alarms allowing an external controller to react
if desired.
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1500 / 1501
7
Software Options
Layer 2
Standard Edition
Layer 3
Standard Edition
Layer 3
Feature
VLANS (802.1Q)
ü
ü
ü
QoS (802.1p)
ü
ü
ü
MSTP (802.1Q-2005) formerly 802.1s
ü
ü
ü
RSTP
ü
ü
ü
eRSTP
ü
ü
ü
SNTP
ü
ü
ü
L2TPv2 and L2TPv3
ü
ü
ü
Port rate limiting
ü
ü
ü
Broadcast storm filtering
ü
ü
ü
Port mirroring
ü
ü
ü
SNMP v1/v2/v3
ü
ü
ü
RMON
ü
ü
ü
CLI
ü
ü
ü
HTML user interface
ü
Security Options
ü
ü
MPLS
ü
ü
DHCP
ü
ü
VRRPv2 and VRRPv3
ü
ü
PIM-SM
ü
ü
Firewall
ü
ü
OSPF
ü
ü
BGP
ü
ü
RIP v1/v2
ü
ü
Traffic prioritization
ü
ü
VPN
ü
IPSec
ü
8
RUGGEDCOM RX1500 / 1501
Utility Grade Layer 2/3 Switch and Router
EMI and Environmental Type Tests
IEC 61850-3 EMI type tests
Test
Description
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated RFI
IEC 61000-4-4
Burst (fast transient)
IEC 61000-4-5
Surge
IEC 61000-4-6
Induced (conducted) RFI
IEC 61000-4-8
Magnetic field
IEC 61000-4-29
Test levels
Severity levels
Enclosure contact
Enclosure air
Enclosure ports
Signal ports
D.C. power ports
A.C. power ports
Earth ground ports 3
+/- 8kV
+/- 15kV
20 V/m
+/- 4kV @ 2.5kHz
+/- 4kV
+/- 4kV
+/- 4kV
4
4
Note 1
Note 1
4
4
4
Signal ports
+/- 2kV line-to-earth,
4
D.C. power ports
A.C. power ports
Signal ports
D.C power ports
A.C. power ports
Earth ground ports
Signal ports
D.C. power ports
A.C. power ports
Signal ports
D.C. power ports
D.C. power ports
Signal ports
D.C. power ports
A.C. power ports
Signal ports
D.C. Power ports
A.C. Power ports
+/- 2kV line-to-earth, +/- 1kV line-to-line
+/- 4kV line-to-earth, +/- 2kV line-to-line
10V
10V
10V
10V
40 A/m continuous, 1000 A/m for 1 s
1000 A/m for 1 s
30% for 0.1s, 60% for 0.1s, 100% for 0.05s
30% for 1 period, 60% for 50 periods
100% for 5 periods, 100% for 50 periods
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
30V Continuous, 300V for 1s
30V Continuous, 300V for 1s
10%
2kVac (Fail-safe relay output)
1.5V DC
2kVac
5kV (Fail-safe relay output)
5kV
5kV
3
4
3
3
3
3
Note 1
5
N/A
N/A
N/A
3
3
3
4
4
3
N/A
N/A
N/A
N/A
N/A
N/A
Enclosure contact
Enclosure air
Enclosure ports
Test levels
+/-2kV, +/-4kV, +/- 8kV
+/-4kV, +/-8kV, +/-15kV
35 V/m
Severity levels
N/A
N/A
N/A
Signal ports
D.C. power ports
A.C. power ports
Earth ground ports 3
Signal ports
D.C. power ports
A.C. power ports
Signal ports
D.C. power ports
A.C. power ports
Signal ports
D.C. power ports
A.C. power ports
+/- 4kV @ 2.5kHz
+/- 4kV
+/- 4kV
+/- 4kV
2.5kV common mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
5kV (Fail-safe relay output)
5kV
5kV
2kVac
2kVac
2kVac
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Enclosure ports 3
D.C. power ports
Voltage dips and interrupts
IEC 61000-4-11
IEC 61000-4-12
Damped oscillatory
IEC 61000-4-16
Mains frequency voltage
IEC 61000-4-17
Ripple on D.C. power supply
IEC 60255-5
Dielectric strength
IEC 60255-5
H.V. Impulse
A.C. power ports
IEEE 1613 (C37.90.x) EMI immunity type tests
Test
Description
IEEE C37.90.3
ESD
IEEE C37.90.2
Radiated RFI
IEEE C37.90.1
Fast transient
IEEE C37.90.1
Oscillatory
IEEE C37.90
H.V. impulse
IEEE C37.90.
Dielectric strength
Environmental type tests
Test
Description
Test levels
Severity levels
IEC 60068-2-1
Cold temperature
Test Ad
-40°C, 16 hours
N/A
IEC 60068-2-2
Dry heat
Test Bd
+85°C, 16 hours
N/A
IEC 60068-2-30
Humidity (damp heat, cyclic) Test Db
95% (non-condensing), 55°C , 6 cycles
N/A
IEC 60255-21-1
Vibration
Test Fc
2g @ (10 - 150) Hz
Class 2 2
IEC 60255-21-2
Shock
Test Ea
30g @ 11mS
Class 2 2
1 RUGGEDCOM specified severity levels.
2 Class 2 refers to “Measuring relays and
protection equipment for which a very high security margin is required or where the vibration levels are
very high, (e.g. shipboard application and for severe transportation conditions”).
3 Only applicable to functional earth connections separated from the safety earth connection.
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1500 / 1501
9
Technical Specifications
Power Supply
EMI Immunity and Environmental Compliance
■ 12VDC (9-15 VDC)
■ 24VDC (15–36VDC)
48VDC (36–72VDC)
HI Voltage AC/DC : 88-300VDC or 85-264VAC
■ Power consumption: 65W Max
■IEC 61000-6-2 Industrial (Generic)
■IEC 61800-3 Industrial (Variable Speed Drive Systems)
■ IEC 61850-3 Electric Utility Substations
■ IEEE 1613 Electric Utility Substations
■ NEMA TS 2 Traffic Control Equipment
Critical Alarm Relay
IEEE Compliance
■ Form-C failsafe contact relay:
5A@30VDC, 8A@250VAC
Physical Dimensions
■ Height: 1.75” (44.5mm)
■ Width: 17.36” (440.9mm)
■ Depth: 11.9” (302.3 mm)
■ Mounting: Rack mounted
■ Ingress protection: IP40 (1mm objects)
■ Weight: Dependent upon module selection,
approximately 10.3 lbs.
Switch Properties
■ Switching method: Store and forward
■ Switching latency: 7 us
■ Switching bandwidth: 10 Gbps
■ MAC addresses: 8192
■ MAC address table size: 64kbytes
■ Priority queues: 4
■ Frame buffer memory: 1 Mbit
■ VLANs: 255
■ IGMP multicast groups: 256
■ Port rate limiting
■ No head of line blocking
Regulatory Approvals
■ ISO: Designed and manufactured using an ISO9001:
2000 certified quality program
■ CE marking
■ Emissions: FCC Part 15 (Class A), EN55022 (CISPR22 Class A)
■ Safety: cCSAus (Compliant with CSA C22.2 No. 60950,
UL 60950, EN60950)
■ Laser eye safety (FDA/CDRH): Complies with 21 CFR
Chapter 1, Subchapter J
Network Management
■ HTTPS graphical web-based
■ SNMP v1, v2c, v3
■ Telnet, VT100
■ Command Line Interface (CLI)
■ SSH
IED 61850 Compliance
■ IEC 61850-9-2 Sampled Values
■ IEC 61850-8-1 GOOSE Messages
Warranty
■ 5 Years – Applicable to design and manufacturing related
product defects.
10
RUGGEDCOM RX1500 / 1501
■ 802.3-10BaseT
■802.3u-100BaseTX, 100BaseFX
■802.3x-Flow Control
■802.3z-1000BaseLX
■802.3ab-1000BaseTX
■Link Aggregation
■802.1d-MAC Bridges
■802.1d-Spanning Tree Protocol
■802.1Q-VLAN Tagging
■802.1w-Rapid Spanning Tree Protocol
■802.1x-Port Based Network Access Control
■802.1Q-2005 (formerly 802.1s) MSTP
IETF RFC Compliance
■RFC768-UDP
■RFC783-TFTP
■RFC791-IP
■RFC792-ICMP
■RFC793-TCP
■RFC826-ARP
■RFC854-Telnet
■RFC894-IP over Ethernet
■RFC1112-IGMP v1
■RFC1519-CIDR
■RFC1541-DHCP (client)
■RFC2030-SNTP
■RFC2068-HTTP
■RFC2236-IGMP v2
■RFC2284-EAP
■RFC2475-Differentiated Services
■RFC2865-RADIUS
■RFC3414-SNMPv3-USM
■RFC3415-SNMPv3-VACM
■RFC2661-L2TPv2
■RFC3931-L2TPv3
■RFC3768-VRRPv2
■RFC5798-VRRPv3
IETF SNMP MIBS
■ RFC1493-BRIDGE-MIB
■RFC1907-SNMPv2-MIB
■RFC2012-TCP-MIB
■RFC2013-UDP-MIB
■RFC2578-SNMPv2-SMI
■RFC2579-SNMPv2-TC
■RFC2819-RMON-MIB
■RFC2863-IF-MIB
■draft-ietf-bridge-rstpmib-03-BRIDGE-MIB
■draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB
■IANAifType-MIB
Utility Grade Layer 2/3 Switch and Router
Dimension Drawings
NOTE
All dimensions are in millimeters, unless otherwise stated.
RX1500
/ RX1501 Dimension Drawings
44.2
296.7
440.9
Overall dimensions
All dimensions are in millimeters, unless otherwise stated.
Figure 54: Overall Dimensions
45
Utility Grade Layer 2/3 Switch and Router
RUGGEDCOM RX1500 / 1501
11
Chapter
Chapter5 5
RUGGEDCOM
RUGGEDCOMRX1500
RX1500
Dimension
DimensionDrawings
Drawings
Installation
InstallationGuide
Guide
28.7
28.7
51.1
51.1
161.0
161.0
212.1
212.1
RX1500 / RX1501 Dimension Drawings
11.7
11.7
21.1
21.1
6.35
6.35
31.8
31.8
463.8
463.8
4.7
4.7
Rack mount
dimensions
Figure
55:
Mount
Figure
55:Rack
Rack
MountDimensions
Dimensions
All dimensions are in millimeters, unless otherwise stated.
51.1
51.1
161.0
161.0
212.1
212.1
29.0
29.0
68.8
68.8
134.6
134.6
160.0
160.0
479.0
479.0
489.2
489.2
51.6
51.6
11.7
11.7
21.1
21.1
Panel 56:
and
DIN
rail
mount
dimensions
Figure
and
Din
Mount
Figure
56:Panel
Panel
and
DinRail
Rail
MountDimensions
Dimensions
All dimensions are in millimeters, unless otherwise stated.
46
46
12
RUGGEDCOM RX1500 / 1501
Utility Grade Layer 2/3 Switch and Router
Order Code
RX1500
PM1
LM1
LM3
LM2
LM4
PM2
6GK60150AM2 - ____ - ____ - _____ - ___ - _____- Z -_____ +B ____ +C ____ +D ____ +E ____ PM1 PM2 MNT ST MOD
SFT
LM1 LM2
LM3 LM4
RX1501
PM1
LM1
LM3
LM5
LM2
LM4
LM6
6GK60150BM2 - ____ - _____ - ___ - _____- Z -_____ +B ____ +C ____ +D ____ +E ____ +F____ +G____
PM1 MNT ST MOD
SFT
LM1 LM2
LM3 LM4 LM5 LM6
PM1 and PM2: Power Modules
Serial Line Module
0 = No power supply 1
1 = 24VDC (15-36VDC), screw terminal block
2 = 48VDC (36-72VDC), screw terminal block
3 = 88-300VDC or 85-264VAC, screw terminal block
4 = 24VDC (15-36VDC), pluggable terminal block
5 = 48VDC (36-72VDC), pluggable terminal block
6 = 88-300VDC or 85-264VAC, pluggable terminal block
7 = 12VDC (9-15VDC), screw terminal block
8 = 12VDC (9-15VDC), pluggable terminal block
03 = 6 x RS232/RS422/RS485 RJ45 Serial Line Module
100BaseFX modules with 2 Ports 1
A = No Mounting Option
D = 19” Rack Mount Kit
E = DIN and Panel Mount Kit
04 = 2 x 100FX - Multimode 1300nm ST connectors 2km
05 = 2 x 100FX - Multimode 1300nm SC connectors 2km
06 = 2 x 100FX - Multimode 1300nm LC connectors 2km
07 = 2 x 100FX - Multimode 1300nm MTRJ connectors 2km
08 = 2 x 100FX - Singlemode 1300nm ST connectors 20km
09 = 2 x 100FX - Singlemode 1300nm SC connectors 20km
10 = 2 x 100FX - Singlemode 1300nm LC connectors 20km
11 = 2 x 100FX - Singlemode 1300nm SC connectors 50km
12 = 2 x 100FX - Singlemode 1300nm LC connectors 50km
13 = 2 x 100FX - Singlemode 1300nm SC connectors 90km
14 = 2 x 100FX - Singlemode 1300nm LC connectors 90km
ST: Switch Type Hardware
10BaseFL / 100BaseSX with 3 Ports
B = Layer 2 Switch
C = Layer 3 Switch
15 = 3 x 10FL / 100SX, Multimode, 850nm, ST, 2km
MNT: Mounting Options
MOD: Manufacturing modifications
0 = None
1 = Conformal coating
SFT: Software
A00 = Layer 2 Standard Edition
A01 = Layer 3 Standard Edition (with L3 HW)
A02 = Layer 3 Standard Edition (with L2 HW)
A03 = Layer 3 Security Edition (with L3 HW)
A04 = Layer 3 Security Edition (with L2 HW)
1500 LM1 through LM4 Line Modules
1501 LM1 and LM2 Line Modules
Blank Module
00 = Blank Module
Copper Ethernet Modules
01 = 6 x 10/100TX RJ45
02 = 2 x 10/100/1000TX RJ45 1
Utility Grade Layer 2/3 Switch and Router
100BaseFX modules with 4 Ports
16 = 4 x 100FX - Multimode 1300nm LC connectors 2km
17 = 4 x 100FX - Multimode 1300nm MTRJ connectors 2km
18 = 4 x 100FX - Singlemode 1300nm LC connectors 20km
19 = 4 x 100FX - Singlemode 1300nm LC connectors 50km
20 = 4 x 100FX - Singlemode 1300nm LC connectors 90km
21 = 4 x 100FX SFP Blank (no optical transceiver)
22 = 4 x 100FX SFP Multimode 1310 nm LC 2km
23 = 4 x 100LX SFP Singlemode 1300 nm LC 20km
24 = 4 x 100LX SFP Singlemode 1300 nm LC 50km
25 = 4 x 100LX SFP Singlemode 1550 nm LC 90km
100BaseFX modules with 6 Ports
26 = 6 x 100FX SFP Blank (no optical transceiver)
27 = 6 x 100FX SFP Multimode 1310nm LC 2km
28 = 6 x 100LX SFP Singlemode 1310nm LC 20km
29 = 6 x 100LX SFP Singlemode 1310nm LC 50km
30 = 6 x 100LX SFP Singlemode 1550 nm LC 90km
1 On the RX1501 these modules may only be selected for LM1 and LM2.
RUGGEDCOM RX1500 / 1501
13
Order Code
Gigabit Ethernet Modules modules with 2 Ports 1
31 = 2 x 1000SX Multimode 850 nm LC 500m
32 = 2 x 1000LX Singlemode 1300 nm SC 10km
33 = 2 x 1000LX Singlemode 1300 nm LC, 10km
34 = 2 x 1000LX Singlemode 1300 nm SC 25km
35 = 1000LX Singlemode 1300 nm LC 25km
36 = 2 x 1000LX SFP Blank (no optical transceiver)
37 = 2 x 1000SX SFP Multimode 850 nm LC 500m
38 = 2 x 1000LX SFP Singlemode 1310 nm LC 10km
39 = 2 x 1000LX SFP Singlemode 1310 nm LC 25km
40 = 2 x 1000LX SFP Singlemode 1550 nm LC 70km
WAN Port Options 2
41 = 1 x T1/E1 RJ48 (Channelized/Unchannelized)
42 = 2 x T1/E1 RJ48 (Channelized/Unchannelized)
43 = 4 x T1/E1 RJ48 (Channelized/Unchannelized)
44 = 1 x E1 75 Ohms BNC (Channelized/Unchannelized)
45 = 2 x E1 75 Ohms BNC (Channelized/Unchannelized)
46 = 1 x GSM/EDGE/HSPA 3 4
47 = 2 x GSM/EDGE/HSPA 3 4
48 = 1 x EVDO rev A Verizon US 3 5
49 = 2 x EVDO rev A Verizon US 3 5
50 = 2 x GSM/EDGE/HSPA and EVDO rev A Verizon US 3 4 5
51 = 1k DDS RJ48 (56k Master/Slave 64k Slave)
10BaseFL / 100BaseSX with 3 Ports
03 = 3 x 10FL / 100SX, Multimode, 850nm, ST, 2km
100BaseFX modules with 4 Ports
04 = 4 x 100FX - Multimode 1300nm LC connectors 2km
05 = 4 x 100FX - Multimode 1300nm MTRJ connectors 2km
06 = 4 x 100FX - Singlemode 1300nm LC connectors 20km
07 = 4 x 100FX - Singlemode 1300nm LC connectors 50km
08 = 4 x 100FX - Singlemode 1300nm LC connectors 90km
09 = 4 x 100FX SFP Blank (no optical transceiver)
10 = 4 x 100FX SFP Multimode 1310 nm LC 2km
11 = 4 x 100LX SFP Singlemode 1300 nm LC 20km
12 = 4 x 100LX SFP Singlemode 1300 nm LC 50km
13 = 4 x 100LX SFP Singlemode 1550 nm LC 90km
100BaseFX modules with 6 Ports
14 = 6 x 100FX SFP Blank (no optical transceiver)
15 = 6 x 100FX SFP Multimode 1310nm LC 2km
16 = 6 x 100LX SFP Singlemode 1310nm LC 20km
17 = 6 x 100LX SFP Singlemode 1310nm LC 50km
18 = 6 x 100LX SFP Singlemode 1550 nm LC 90km
WAN Port Options 2
52 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB, Linux
53 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB,
Windows 7 Embedded
54 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB, Linux
55 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB,
Windows 7 Embedded
56 = APE, 1.3GHz, 2GB RAM, 16GB SATA, DVI-D Video, 2xUSB, Checkpoint FW (Requires Checkpoint License)
19 = 1 x T1/E1 RJ48 (Channelized/Unchannelized)
20 = 2 x T1/E1 RJ48 (Channelized/Unchannelized)
21 = 4 x T1/E1 RJ48 (Channelized/Unchannelized)
22 = 1 x E1 75 Ohms BNC (Channelized/Unchannelized)
23 = 2 x E1 75 Ohms BNC (Channelized/Unchannelized)
24 = 1 x GSM/EDGE/HSPA 3 4
25 = 2 x GSM/EDGE/HSPA 3 4
26 = 1 x EVDO rev A Verizon US 3 5
27 = 2 x EVDO rev A Verizon US 3 5
28 = 2 x GSM/EDGE/HSPA and EVDO rev A Verizon US 3 4 5
29 = 1k DDS RJ48 (56k Master/Slave 64k Slave)
M12 Copper Ethernet Modules
Application Processing Engine 6 7
57 = 2 x 10/100/1000TX 8-pin M12 1
58 = 4 x 10/100TX 8-pin M12 1
59 = 4 x 10/100TX 4-pin M12
60 = 2 x 10/100/1000TX 8-pin M12 with controlled Bypass 1
61 = 4 x 10/100TX 8-pin M12 with controlled Bypass
62 = 4 x 10/100TX 4-pin M12 with controlled Bypass
63 = 2 x 10/100/1000TX 8-pin M12 X-CODED
64 = 2 x 10/100/1000TX 8-pin M12 X-CODED with
controlled Bypass 1
M12 Copper Ethernet Modules
Application Processing Engine 6 7
1501: LM3 through LM6 Line Modules
Blank Module
00 = Blank Module
Copper Ethernet Modules
01 = 6 x 10/100TX RJ45
Serial Line Module
02 = 6 x RS232/RS422/RS485 RJ45 Serial Line Module
=
14
RUGGEDCOM RX1500 / 1501
30 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB, Linux
31 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB,
Windows 7 Embedded
32 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB, Linux
33 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB,
Windows 7 Embedded
34 = APE, 1.3GHz, 2GB RAM, 16GB SATA, DVI-D Video, 2xUSB, Checkpoint FW (Requires Checkpoint License)
36 = 4 x 10/100TX 8-pin M12
37 = 4 x 10/100TX 4-pin M12
36 = 4 x 10/100TX 8-pin M12 with controlled Bypass
37 = 4 x 10/100TX 4-pin M12 with controlled Bypass
1 On the RX1501 these modules may only be selected for LM1 and LM2.
2 Only one T1/E1 module may be used per router.
3 Carrier approvals may be required.
4 HSPA module is rated from -25°C to +75°C.
5 EVDO module is rated from -30°C to +75°C.
6 APE module is rated from -40°C to +70°C.
7 Maximum 2 APEs can be installed in a chassis.
Utility Grade Layer 2/3 Switch and Router
Example Order Codes
RX1500
6GK6015-0AM23-3DC0-Z A01+B06+C22+D00+E00
RX1500 unit with 2 (two) 88-300VDC or 85-264VAC screw terminal block power
supplies, 19 “ Rack Mount Kit, Layer 3 Switch Type, Layer 3 Standard Edition (with
L3 HW) Software, 2x 100FX - Multimode 1300nm LC connectors 2km, 4x 100FX
SFP Multimode 1310 nm LC 2km, 2 blank modules
RX1501
6GK6015-0BM27-7DB1-Z A00+B06+C22+D00+E00+F00+G00
RX1501 unit with 2 (two) 12VDC (9-15VDC), screw terminal block power
supplies, 19” Rack Mounted, Layer 2 Switch Type, Conformal Coating, Layer 2
Standard Edition Software, 2x 100FX - Multimode 1300nm LC connectors 2km,
4x 100FX SFP Multimode 1310 nm LC 2km, 4 blank modules
Accessories / Options
Fast Ethernet SFPs
6GK6000-8FE51-0AA0 = 100FX SFP Multimode LC
1310nm 2Km
6GK6000-8FE52-0AA0 = 100FX SFP Singlemode LC
1310nm 20Km
6GK6000-8FE53-0AA0 = 100FX SFP Singlemode LC
1310nm 50Km
6GK6000-8FE54-0AA0 = 100FX SFP Singlemode LC
1310nm 90Km
Gigabit SFPs
6GK6000-8FG51-0AA0 = 1000SX SFP Multimode LC
850nm 500m
6GK6000-8FG52-0AA0 = 1000LX SFP Singlemode LC 1310nm 10km
6GK6000-8FG53-0AA0 = 1000LX SFP Singlemode LC 1310nm 25km
6GK6000-8FG54-0AA0 = 1000LX SFP Singlemode LC 1550nm 70km
Utility Grade Layer 2/3 Switch and Router
Bidirection SFPs
6GK6000-8FB51-0AA0 = 1000BX SFP Singlemode LC 1310Tx 1490Rx 10km
6GK6000-8FB52-0AA0 = 1000BX SFP Singlemode LC 1490Tx 1310Rx 10km
6GK6000-8FB53-0AA0 = 1000BX SFP Singlemode LC 1310Tx 1490Rx 40km
6GK6000-8FB54-0AA0 = 1000BX SFP Singlemode LC 1490Tx 1310Rx 40km
Antennas
6GK6000-8NA00-0AA0 = Dual Band Antenna for use with the W21, W22 or W32 Option
6GK6000-8NB00-0AA0 = 7 Band Antenna for use with the W11, W12 or W32 Option
RUGGEDCOM RX1500 / 1501
15
Siemens Industry, Inc.
5300 Triangle Parkway
Norcross, GA 30092
1-800-241-4453
[email protected]
usa.siemens.com/ruggedcom
Subject to change without prior notice.
All rights reserved.
©2015 Siemens Industry, Inc.
The information provided in this brochure contains descriptions or
characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of further
development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are subject
to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third parties
for their own purposes could violate the rights of the owners.