74AHC1G04 SINGLE INVERTER GATE Description Pin Assignments (Top View) The 74AHC1G04 is a single inverter gate with a standard push-pull output. The device is designed for operation with a NC 5 Vcc 1 power supply range of 2.0V to 5.5V. The gate performs the positive Boolean function: A 2 NEW PRODUCT Y=A 4 Y GND 3 SOT25 / SOT353 Features Applications • Supply Voltage Range from 2.0V to 5.5V • General Purpose Logic • ± 8 mA Output Drive at 5.0V • Wide array of products such as: • CMOS low power consumption o PCs, networking, notebooks, netbooks, PDAs • Schmitt Trigger Action at Input Makes the Circuit o Computer peripherals, hard drives, CD/DVD ROM Tolerant for Slower Input Rise and Fall Time o TV, DVD, DVR, set top box ESD Protection per JESD 22 o Personal Navigation / GPS • • • o MP3 players ,Cameras, Video Recorders o Exceeds 200-V Machine Model (A115-A) o Exceeds 2000-V Human Body Model (A114-A) o Exceeds 1000-V Charged Device Model (C101C) Latch-Up Exceeds 100mA per JESD 78, Class II SOT25 and SOT353: Assembled with “Green” Molding Compound (no Br, Sb) • Lead Free Finish / RoHS Compliant (Note 1) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74AHC1G04 Document number: DS35171 Rev. 1 - 2 1 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Pin Descriptions Pin Name Pin NO. NC A GND Y 1 2 3 4 5 NEW PRODUCT VCC Description No Connection Data Input Ground Data Output Supply Voltage Logic Diagram A 4 2 Y Function Table Inputs A Output Y H L L H 74AHC1G04 Document number: DS35171 Rev. 1 - 2 2 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Absolute Maximum Ratings (Note 2) Symbol ESD HBM ESD CDM ESD MM NEW PRODUCT VCC Description Human Body Model ESD Protection Charged Device Model ESD Protection Machine Model ESD Protection Supply Voltage Range VI Input Voltage Range Vo Voltage applied to output in high or low state Rating Unit 2 1 200 KV KV V -0.5 to 6.5 V -0.5 to 6.5 V -0.5 to VCC +0.5 V IIK Input Clamp Current VI<0 -20 mA IOK Output Clamp Current (VO < 0 or VO > VCC) ±20 mA ±25 mA 50 mA IO Continuous output current (VO = 0 to VCC) ICC Continuous current through VCC IGND Continuous current through GND -50 mA TJ Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C TSTG Notes: 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 3) Symbol VCC Parameter Operating Voltage VCC = 2V VIH High-level Input Voltage Min Max Unit 2 5.5 V 1.5 VCC = 3V 2.1 VCC = 5.5V 3.85 VCC = 2V VIL Low-level input voltage VI Input Voltage VO Output Voltage IOH IOL Δt/ΔV TA Notes: High-level output current Low-level output current Input transition rise or fall rate V 0.5 VCC = 3V 0.9 VCC = 5.5V 1.65 0 5.5 0 V V VCC V VCC = 2V -50 uA VCC = 3.3V ± 0.3V -4 VCC = 5V ± 0.5V -8 VCC = 2V 50 VCC = 5V ± 0.5V 4 VCC = 3V 8 VCC = 3.3V ± 0.3V 100 VCC = 5V ± 0.5V 20 Operating free-air temperature -40 125 mA uA mA ns/V ºC 3. Unused inputs should be held at VCC or Ground. 74AHC1G04 Document number: DS35171 Rev. 1 - 2 3 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Electrical Characteristics Symbol NEW PRODUCT VOH VOL II ICC CI θJA θJC Note: Parameter High Level Output Voltage Low Level Output Voltage Test Conditions VCC Min 25ºC Typ. 2 3 4.5 IOH = -50μA 2V 3V 4.5V 1.9 2.9 4.4 IOH = -4mA 3V IOH = -8mA 4.5V IOL = 50μA 2V 3V Max -40ºC to 85ºC Min Max -40ºC to 125ºC Min Max 1.9 2.9 4.4 1.9 2.9 4.4 2.58 2.48 2.40 3.94 3.8 3.70 0.1 0.1 0.1 0.1 Unit V 0.1 0.1 4.5V 0.1 0.1 0.1 IOL = 4mA 3V 0.36 0.44 0.55 IOL = 8mA 4.5V 0.36 0.44 0.55 V Input Current VI = 5.5 V or GND 0 to 5.5V ± 0.1 ±1 ±2 μA Supply Current VI = 5.5V or GND IO=0 5.5V 1 10 40 μA VI = VCC – or GND 5.5V 10 10 10 pF Input Capacitance Thermal Resistance Junction-toAmbient Thermal Resistance Junction-toCase 2.0 SOT25 195 (Note 4) SOT353 o C/W o C/W 430 SOT25 58 (Note 4) SOT353 155 4. Test conditions for SOT25, and SOT353: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout Switching Characteristics VCC = 3.3 V ± 0.3 (see Figure 1) Parameter Min 25ºC Typ. Max -40ºC to 85ºC Min Max -40ºC to 125ºC Min Max CL=15pF 0.6 4.3 7.1 0.6 8.5 0.6 11.0 ns CL=50pF 0.6 6.1 10.6 0.6 12.0 0.6 14.5 ns Min 25ºC Typ. Max -40ºC to 85ºC Min Max -40ºC to 125ºC Min Max CL=15pF 0.6 3.1 5.5 0.6 6.5 0.6 7.0 ns CL=50pF 0.6 4.5 7.5 0.6 8.5 0.6 9.5 ns From TO (Input) (OUTPUT) tpd A Y Unit VCC = 5 V ± 0.5V (see Figure 1) Parameter From TO (Input) (OUTPUT) tpd A Y 74AHC1G04 Document number: DS35171 Rev. 1 - 2 4 of 8 www.diodes.com Unit March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Operating Characteristics TA = 25 ºC Test Conditions Parameter NEW PRODUCT Cpd Power dissipation capacitance VCC = 5V Unit Typ. f = 1 MHz No Load 12 pF Parameter Measurement Information VCC 3.3V±0.3V Inputs VM CL ≤3ns VCC/2 15pF VI tr/tf VCC 5V±0.5V VCC ≤3ns VCC/2 15pF 3.3V±0.3V VCC ≤3ns VCC/2 50pF 5V±0.5V VCC ≤3ns VCC/2 50pF Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 1 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74AHC1G04 Document number: DS35171 Rev. 1 - 2 5 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Ordering Information Function Logic Device 74 : Logic Prefix AHC : 2 to 5.5V Family 1G : One gate Device 74AHC1G04W5-7 74AHC1G04SE-7 Notes: Package 04 : 1-Input Inverter - Gate Package Code W5 SE Packing 7 : Tape & Reel W5 : SOT25 SE : SOT353 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 Packaging (Note 5) SOT25 SOT353 5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (Top View) 5 4 7 NEW PRODUCT 74AHC1G 04 XX - 7 XX Y W X 1 2 3 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code Part Number Package Identification Code 74AHC1G04W5 74AHC1G04SE SOT25 SOT353 YT YT 74AHC1G04 Document number: DS35171 Rev. 1 - 2 6 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE Package Outline Dimensions (All Dimensions in mm) (1) Package Type: SOT25 A SOT25 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D ⎯ ⎯ 0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 N 0.70 0.80 0.75 0° 8° α ⎯ All Dimensions in mm NEW PRODUCT B C H K M N J L D (2) Package Type: SOT353 A SOT353 Dim Min Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Typ F 0.40 0.45 H 1.80 2.20 J 0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.22 0° 8° α All Dimensions in mm B C H K J M D F 74AHC1G04 Document number: DS35171 Rev. 1 - 2 L 7 of 8 www.diodes.com March 2011 © Diodes Incorporated 74AHC1G04 SINGLE INVERTER GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com 74AHC1G04 Document number: DS35171 Rev. 1 - 2 8 of 8 www.diodes.com March 2011 © Diodes Incorporated