74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Description Pin Assignments (Top View) The 74LVCE1G07 is a single inverter gate with an open drain output. The device is designed for operation with a power supply range of 4V to 5.5V. The input is tolerant to 5.5V allowing this device to be used in a mixed voltage NC 1 A 2 5 Vcc 4 Y environment. The device is fully specified for partial power GND 3 NEW PRODUCT down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. SOT25 / SOT353 The open-drain output can be connected to other open drain outputs to implement activelow wired-OR or active-high wired-AND functions. (Top View) The maximum sink current is 32 mA. NC 1 6 Vcc A 2 5 NC GND 3 4 Y Features • Wide Supply Voltage Range from 1.65 to 5.5V • ± 24mA Output Drive at 3.3V • CMOS low power consumption • IOFF Supports Partial-Power-Down Mode Operation • Inputs accept up to 5.5V • ESD Protection Tested per JESD 22 DFN1410 (Note 2) Applications Exceeds 200-V Machine Model (A115-A) • Voltage Level Shifting Exceeds 2000-V Human Body Model (A114-A) • General Purpose Logic • Latch-Up Exceeds 100mA per JESD 78, Class II • Power Down Signal Isolation • Range of Package Options • Wide array of products such as. • Direct Interface with TTL Levels o PCs, networking, notebooks, netbooks, PDAs • SOT25, SOT353, and DFN1410: Assembled with “Green” o Computer peripherals, hard drives, CD/DVD ROM Molding Compound (no Br, Sb) o TV, DVD, DVR, set top box • Lead Free Finish/ RoHS Compliant (Note 1) o Cell Phones, Personal Navigation / GPS o MP3 players ,Cameras, Video Recorders Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Pin 2 and pin 5 of the DFN1410 package are internally connected. 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 1 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Pin Descriptions Pin Name No connection NC Data Input A GND Ground Data Output Open Drain Y Vcc NEW PRODUCT Description Supply Voltage Logic Diagram A 4 2 Y Function Table Inputs Output A Y H Z L L 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 2 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Absolute Maximum Ratings (Note 3) Symbol Description Rating Unit 2 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V Vo Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA Continuous current through Vdd or GND ±100 mA Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C ESD HBM Human Body Model ESD Protection ESD MM Machine Model ESD Protection NEW PRODUCT VCC TJ TSTG Notes: 3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 3 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Recommended Operating Conditions (Note 4) Symbol VCC NEW PRODUCT VIH Operating Voltage High-level Input Voltage Parameter Min Max Unit Operating 1.4 5.5 V Data retention only 1.2 VCC = 1.4 V to 1.95 V 0.65 X VCC VCC = 2.3 V to 2.7 V 1.7 VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VIL Low-level input voltage V V 2 0.7 X VCC VCC = 1.4 V to 1.95 V 0.35 X VCC VCC = 2.3 V to 2.7 V 0.7 VCC = 3 V to 3.6 V 0.8 VCC = 4.5 V to 5.5 V V 0.3 X VCC VI Input Voltage 0 5.5 V VO Output Voltage 0 VCC V IOL Low-level output current Vcc=1.4 V 3 VCC = 1.65 V 4 VCC = 2.3 V 8 16 VCC = 3 V 24 VCC = 4.5 V Δt/ΔV TA Notes: mA 32 VCC = 1.4 V to 3.0 V Input transition rise or fall VCC = 3.3 V ± 0.3 V rate VCC = 5 V ± 0.5 V Operating free-air temperature 20 10 ns/V 5 -40 85 ºC 4. Unused inputs should be held at Vcc or Ground. 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 4 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C) Over recommended free-air temperature range (unless otherwise noted) Symbol Parameter Test Conditions IOL = 100 μA NEW PRODUCT VOL Low Level Output Voltage Vcc Typ Max 1.4 V to 5.5 V 0.1 IOL = 3 mA 1.4 V 0.4 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.3 IOL = 16 mA IOL = 32 mA Unit V 0.4 3V IOL = 24 mA II Min 0.55 4.5 V 0.55 0 to 5.5 V ±5 μA 3.6 V ± 10 μA 0V ± 10 μA 1.4 V to 5.5 V 10 μA 3 V to 5.5 V 500 μA Input Current VI = 5.5 V or GND IOZ Z State Leakage Current VO = 5.5V IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5 V or GND IO=0 ΔICC Additional Supply Current Input at VCC –0.6 V CIi Input Capacitance VI = VCC or GND 3.3V 4 pF CO Output Capacitance VO= VCC or GND 3.3V 5 pF SOT25 (Note 5) 204 θJA Thermal Resistance Junction-to-Case SOT353 (Note 5) 371 DFN1410 (Note 5) 430 SOT25 (Note 5) 52 SOT353 (Note 5) 143 DFN1410 (Note 5) 190 θJC Notes: Thermal Resistance Junction-to-Case ºC/W ºC/W 5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 5 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Switching Characteristics Over recommended free-air temperature range, CL = 15pF (see Figure 1) Vcc = 1.5 V Vcc = 1.8 V Vcc = 2.5 V From TO ± 0.1V ± 0.15V ± 0.2V Parameter (Input) (OUTPUT) Min Max Min Max Min Max NEW PRODUCT tpd A Y 1.5 9.9 1 5.8 0.8 4.4 Vcc = 3.3 V ± 0.3V Min Max 0.8 3.4 Vcc = 5 V ± 0.5V Unit Min Max 0.8 3.1 ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance Test Conditions f = 10 MHz 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 Vcc = 1.5 V Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V Vcc = 5 V TYP TYP TYP TYP TYP 3 3 3 4 6 6 of 13 www.diodes.com Unit pF December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT NEW PRODUCT Parameter Measurement Information Inputs Vcc 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VI VCC VCC 3V VCC tr/tf ≤2ns ≤2ns ≤2.5ns ≤2.5ns TEST Condition tPLZ (see Notes D and E) tPZL(see Notes D and F) Vload Vload VM VLOAD CL RL V∆ VCC/2 VCC/2 1.5V VCC/2 2 X VCC 2 X VCC 6V 2 X VCC 30pF 30pF 50pF 50pF 1KΩ 500Ω 500Ω 500Ω 0.15V 0.15V 0.3V 0.3V Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz C. The inputs are measured one at a time with one transition per measurement. D. For the open drain device tPLZ and tPZL are the same as tPD E. tPZL is measured at VM. F. tPLZ is measured at VOL +V∆ 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 7 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT NEW PRODUCT Ordering Information Device 74LVCE1G07W5-7 74LVCE1G07SE-7 74LVCE1G07FZ4-7 Notes: Package Code W5 SE FZ4 Packaging (Note 6) SOT25 SOT353 DFN1410 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 5000/Tape & Reel -7 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 8 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Marking Information (1) SOT25 and SOT353 (Top View) 4 7 5 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code NEW PRODUCT XX Y W X 1 2 3 Part Number 74LVCE1G07W5 74LVCE1G07SE Package SOT25 SOT353 Identification Code PN PN (3) DFN1410 (Top View) XX YWX Part Number 74LVCE1G07FZ4 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal code Package DFN1410 9 of 13 www.diodes.com Identification Code PN December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT25 (2) Package Type: SOT353 6x-0.42 CL 0.10/0.30 C L 0.65Bsc. 0.25/0.40 C L 1.8/2.2 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 0.1/0.22 Detail"A" 0.9/1.0 0/0.1 1.10Max. 0.25 0.40/0.45 Gauge Plane Land Pattern Recommendation (unit:mm) Top View ° PIN 1 0°/8 C L 6x-0.60 2x-0.65 1.15/1.35 2.0/2.2 C L 1.9 1.3 "A" 10 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Package Outline Dimensions (Continued) 1.35/1.45 0.550 6x-0.25 2X- NEW PRODUCT C Side View 6x-0.35 Seating Plane 0.25 A 0.08 C 0.13Typ. 0.40Max. 0.10 C 6x- 0/0.05 (3) Package Type: DFN1410 A 0.50Typ. 2X- (Pin #1 ID) X 45¢ . 1x C0 0.075¡ 0Ó.030 6x-0.25/0.35 0.95/1.05 B 4x-0.50Typ. Land Pattern Recommendation (mm) Top View 0.25 B 0.10(4x) 6x-0.15/0.25 0.10 C A B Bottom View 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 11 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Taping Orientation (Note 7) NEW PRODUCT For DFN1410 Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 12 of 13 www.diodes.com December 2010 © Diodes Incorporated 74LVCE1G07 SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com 74LVCE1G07 Document number: DS32275 Rev. 2 - 2 13 of 13 www.diodes.com December 2010 © Diodes Incorporated