8 7 5 6 4 3 2 This document, including the design, configuration and mechanical features revealed herein are the sole, confidential and proprietary property of TRU Corporation. Reproduction or use thereof, in whole or part, is prohibited without the prior written consent of TRU Corporation. 1 REV. DESCRIPTION DATE APPROVED - ORIGINAL ISSUE 12/31/09 AM D D 3.75 3.50 3.88 1.25 2.13 .47 13-30(f) 1-5/8 EIA(f) C C ENGINEERING DATA: ELECTRICAL: IMPEDANCE: 50 OHMS NOMINAL 1.963 INTERFACE: 1-5/8 EIA: PER EIA RS-225 AND MIL-DTL-24044 13-30(f): PER IEC 60169-5 B O-RING .281 HOLE 4 PLCS 2.250 TYP MATERIAL: BODY & COUPLING RING: BRASS CENTER CONTACTS: BRASS & BERYLLIUM COPPER O-RING & GASKET: SILCONE RUBBER INSULATORS: TEFLON SCREW, ALIGNMENT PIN & LOCKWASHER: STEEL SNAP RING: PHOSPHOR BRONZE B 3.00 FINISH: BODY & COUPLING RING: NICKEL PLATED CENTER CONTACTS: SILVER PLATED SCREW & LOCKWASHER: PASSIVATED MATERIAL DO NOT SCALE DRAWING DRAWN MVC UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES A NOTES: 1. UNLESS OTHERWISE SPECIFIED; ALL DIMENSIONS ARE REFERENCE ONLY. TOLERANCES: FRACTIONS: 1/64 .XX : .01 .XXX: .005 ANGLES: 1/2` MACHINED SURFACES: COMMENTS: 12/29/09 ENG APPR. AM 8 7 6 5 DATE 12/31/09 MFG APPR. DATE OTHER APPR. DATE THIRD ANGLE PROJECTION 63 surface area: sq inch DATE TITLE: SIZE B A CONNECTOR, COAXIAL, RF 13-30(f) to 1-5/8 EIA(f) ADAPTER DWG. NO. CAGE CODE: 92180 weight: lbs 4 3 2 REV TRU-11443 - SCALE: 1:1 SHEET 1 OF 1 1