With features including terminals that eliminate the need to splice and crimp wire, elliptical mounting holes, a large wiring channel that WAVE2 WAVE2PD provides plenty of room to route wires and a convenient hinged case cover, our easy-to-install sirens are designed to save you time and money. WAVE2F Two-Tone Siren Two-Tone Piezo Dynamic Siren • Less than half the weight of traditional sirens • 105dB @120mA • 1/3 the current requirements of standard sirens • Terminal strip eliminates soldering and splicing • Snap-open hinged case cover for faster installation • Corner or ceiling mounting with no additional brackets or hardware Also available: WAVE2PDT - tampered version • Patented design fits single gang boxes Two-Tone Flush Mount Siren • Snap-open hinged case cover for faster installation • Same performance as Wave2 • Loud (106dB) dual tone siren output • Unique hinged case design allows for installation without disassembly 748 748LC • Extremely Loud (119dB) •L ow current draw, 550mA@ 12VDC Dual-Tone Siren Dual-Tone Siren •Smaller - mounts directly to wall or 4” electrical box • Smaller - mounts directly to wall 4” electrical box • Dual tone output - steady and warble • Dual tone output - steady and warble • Loud (106dB) dual tone siren output • Ready to mount - no disassembly required • 112dB • Fits a standard double gang electric box • Tamper proof and weather resistant • Ready to mount - no disassembly required • Channeled case back for convenient wiring access • Easy terminal block wire connections • Attractive, can be used indoors or outdoors • Tamper proof and weather resistant • UL Commercial Burglary • Attractive design • Snap on trim ring conceals screws • Attractive, can be used indoors or outdoors (See diagram 1) (See diagram 3) (See diagram 2) (See diagram 4) 747PD 747F 702 719 • Terminal strip eliminates splicing and soldering •C orner or ceiling mounting with no additional brackets or hardware • Snap on trim ring conceals screws (See diagram 4) * 747 Speakers Self-Contained Indoor Siren Two-Tone Piezo-Dynamic Indoor Siren Self-Contained Electronic Siren Self-Contained Indoor Siren Self-Contained Electronic Siren • Two tones - steady and warble driver is built-in • Half the weight of standard sirens • 95dB outputs at 12VDC • 6 to 12VDC combination speaker and siren driver • Combination speaker and siren driver • 95dB • 105dB @120mA • Flush mount • 110dB •Dual tone - warble and steady • Durable ABS plastic • 1/3 the current requirements of standard sirens •Two tones - steady and warble • Dual tone - warble or steady • 6 to 12VDC power input •15 watt power rating •Terminal strip eliminates soldering and splicing • High quality mylar cone • Enclosed wires • Small size - 5” diameter • Easy mounting with hardware included • Durable ABS plastic • 30 watt power rating • Indoor or outdoor use • High quality mylar cone •S nap-open hinged case cover for fast installation • Attractive designer case •Weather resistant, high impact construction Also available: 747PDT tampered version • Protective cabinet available 743BE Also available: *747UL • Hardware included • Built-in Tamper Plate protects wires from attack (See diagram 5) (See diagram 8) (See diagram 7) (See diagram 11) Wireless Siren Sirens Sirens, Speakers, Bells & Strobes (See diagram 9) 5800WAVE Wireless Siren • Plug into any standard duplex receptacle • 95dB @ 3 feet • 12 hour battery backup • Ready to mount - no disassembly required •T ransmits status, tamper, low battery, supervisory and AC signals (See diagram 6) Honeywell offers a wide variety of speakers to meet any installation challenge. Whether you’re looking for an outdoor version WAVE 746 746F • Attractive patented design fit single gang wall plate • Easy to mount on wall • Flush mount • 8 ohms/20 watts (25 watts peak) • Snap-open hinged case cover for faster installation • 15 watts continuous, 20 watts peak • 15 watts continuous, 20 watts peak •T wo positions terminal block eliminates splicing and soldering •D ouble polyurethane coated voice coil-prevents corrosion •D ouble polyurethane coated voice coil-prevents corrosion •S maller - mounts directly to wall or 4” electrical box •C orner or ceiling mounting with no additional brackets or hardware • Mounting hardware included • Mounting hardware included • Ready to mount - no disassembly required • Heavy duty magnet • Heavy duty magnet • Attractive, can be used indoors or outdoors Indoor Speaker Speaker for unforgiving environments or a flush-mount version to match the décor of any room, we’ve got what you’re looking for. 749 Indoor Speaker Speaker • Dual tone output - steady and warble •C hanneled or horizontal mounting for great versatility • Snap on trim ring conceals screws • 8 ohms/15 watts (See diagram 5) (See diagram 3) (See diagram 7) 705-820 713 • 8 ohms/20 watts •P owerful 40 watts, 8 ohm speaker Speaker (See diagram 4) High Power Speakers • Can be mounted in a cabinet • Weather resistant housing Also available: 735BE cabinet • Ideal for indoor and outdoor applications (See diagram 10) Our rugged designs are built to Strobes Bells & Boxes •J acketed 3-conductor lead included tamper loop withstand harsh environmental conditions.Our bells, boxes and strobes are ideal for both 735BE AB12M Cabinet Including Speaker indoor and outdoor use including schools, office buildings, corridors and apartment buildings where audio and visual warning are required by local jurisdictions. 1011BE12M Motorized Bell in Box • Required on UL Grade A installation Motorized Bell in Box • 10” motorized bell • Tampered cabinet •M otorized bell with only 100 mA current draw at 12VDC •L ow current draw only 100 mA current draw at 12VDC • Reduced installation time • Extra heavy steel Also available: • 10” underdome bell 742BE for 5” diameter siren or speaker • Two tamper switches • Fully tampered for protection from attempts to open, drill or chisel through cabinet 743BE 10” cabinet for 702 external siren • Insulated inner box For tamper provision, use the 955WH and 28-2 bracket • Fully tampered for protection from attempts to open, drill or chisel through cabinet See our website for additional information • Includes 705-820, 8 ohm, 20 watt speaker 710 Strobe Warning Lights • High intensity flashes for fast premise identification •M ay be surface mounted or mounted on alarm bell housing • 6 to 12VDC operation in single unit • Weather resistant for outdoor use Also available: 710CL - Clear 710am - Amber 710rD - Red 710BL - Blue (See diagram 12) See our website for additional information This section features dimensional drawings of our most popular selling sounders. Simply match the drawing reference number from above with the drawing in this section. Use the graphic key to identify which application the sounder can be used on. FOR REFERENCE ONLY. 1 2 1.10" 0.55" 3.28" 1.40" 4 1.04" 0.52" 2.00" 0.15" 2.20" 1.30" WAVE 2PD UNT I LOC NG HO ATIO LES NS 4.46" 3.15" UNT AR REA VIE 4.32" 7 8 0.25" 1.25" RE RE AR WAVE 2F W VIE W MoUNTiNG SCreW 3.62" 9 10 746F INDOOR SPEAKER 0.25" 12 11 8.13" 6.00" MO UNT HO ING LOC LES ATIO NS 9.25" 719 SIREN 5.00" Dia. 1.75" 1.02" 6.62" 2.04" 4.25" 3.25" 4.25" 747PD INDOOR SIREN REA - Commercial - Residential - Outdoor Use 1.18" 2.04" 2.72" 10.92" 9.13" 0.68" 4.25" For additional information on our complete line of sounding devices, please contact our sales department at 1-800-467-5875 www.honeywell.com/security/hsc 8.00" 4.35" 0.88" 1.50" 5.125" 5.60" 713 SIREN W 2.90" 6.35" 1.88" 3.00" R VIE 5.00" 702 SIREN 5.00" 3.63" October 2013 L/SIRENSWC/D PRINTED IN THE USA W 0.90" 1.25" Key: 3.15" 4.33" VIE 3.15" 4.33" WAVE 2 3.25" 1.80" AR 4.60" 748 SIREN 4.40" 3.25" UNT IN LOC G HO ATIO LES NS 0.42" 2.85" 1.82" 3.42" R VIE W ING H ATIO OLES NS UNT IN LOC G HO ATIO LES NS 2.68" RE LOC MO 746 INDOOR SPEAKER MO MO 4.40" reCePTACle Cover PlATe iN PoSiTioN 1.95" 2.15" MO 6 5 4.12" DRAWINGS NOT TO SCALE. 2.38" 1.10" 3.95" 3.35"