This document is a declaration of the substances within the manufacturer listed item. Note: if the item is an assembly with lower level parts, the declaration encompasses all lower level materials for which the manufacturer has © Copyright 2005. IPC, Bannockburn, Illinois. All rights reserved under engineering responsibility. both international and Pan-American copyright conventions. Adobe Reader version 7.0.5 is required to complete this declaration. Material Composition Declaration 1752-2 IPC Web Site for Information on IPC-1752 Standard http://www.ipc.org/IPC-175x 1.1 Form Type * Distribute Declaration Class * Class 6 - RoHS Yes/No, Homogeneous Materials and Mfg Informat Supplier Information Company Name * Company Unique ID Ecliptek Corporation Contact Name * Unique ID Authority Response Date * Phone - Contact * 2013-10-04 Email - Contact * (714) 433-1200 Phone - Representative * [email protected] Email - Representative * Supplier Comments or URL for Additional Information V.P. of Engineering (714) 433-1200 [email protected] http://www.ecliptek.com/ Mfr Item Number Mfr Item Name Effective Date Title - Contact Tom Culhane V.P. of Engineering Authorized Representative * Title - Representative Tom Culhane Requester Item Number EMK22 Series Version Response Document ID Manufacturing Site 2007-11-19 Alternate Recommendation Weight * UOM Unit Type 33.961 mg Each Alternate Item Comments Manufacturing Process Information Terminal Plating / Grid Array Material Nickel/Palladium/Gold (Ni/Pd/Au) Terminal Base Alloy CU Alloy J-STD-020 MSL Rating 1 Peak Process Body Temperature Max Time at Peak Temperature Number of Reflow Cycles 260 C 10 seconds 2 Comments Terminal Plating Thickness: Gold (0.12 to 0.80µinch), Palladium (0.50 to 8.00µinch), Nickel (20 to 150µinch). RoHS Definition Addition: Quantity limit of 0.1% by mass (1000ppm) in homogeneous material for Decabromodiphenylether (or Deca-BDE) and Perfluorooctane Sulfonate (PFOS). * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Save the fields in this form to a file Export Data Import fields from a file into this form Locked Import Data RoHS Material Composition Declaration Declaration Type * Custom RoHS Directive RoHS Definition: Quantity limit of 0.1% by mass (1000 PPM) in homogeneous material for: Lead (Pb), Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB), 2002/95/EC Polybrominated Diphenyl Ethers (PBDE) and quantity limit of 0.01% by mass (100 PPM) of homogeneous material for Cadmium RoHS 2 (Recast of EU RoHS Directive 2002/95/EC): This material composition declaration certifies that the listed product complies with the requirements of Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment as adopted June 8, 2011 and published in the Official Journal of the European Union on July 1, 2011. Supplier certifies that it gathered the information it provides in this form using appropriate methods to ensure its accuracy and that such information is true and correct to the best of its knowledge and belief, as of the date that Supplier completes this form. Supplier acknowledges that Company will rely on this certification in determining the compliance of its products with European Union member state laws that implement the RoHS Directive. Company acknowledges that Supplier may have relied on information provided by others in completing this form, and that Supplier may not have independently verified such information. However, in situations where Supplier has not independently verified information provided by others, Supplier agrees that, at a minimum, its suppliers have provided certifications regarding their contributions to the part, and those certifications are at least as comprehensive as the certification in this paragraph. If the Company and the Supplier enter into a written agreement with respect to the identified part, the terms and conditions of that agreement, including any warranty rights and/or remedies provided as part of that agreement, will be the sole and exclusive source of the Supplier’s liability and the Company’s remedies for issues that arise regarding information the Supplier provides in this form. In the absence of such written agreement, the warranty rights and/or remedies of Supplier's Standard Terms and Conditions of Sale applicable to such part shall apply. Supplier Acceptance * Accepted RoHS Declaration * 1 - Item(s) does not contain RoHS restricted substances per the definition above Exemptions: If the declared item does not contain RoHS restricted substances per the definition above except for defined RoHS exemptions, then select the corresponding response in the RoHS Declaration above and choose all applicable exemptions. Declaration Signature Instructions: Complete all of the required fields on all pages of this form. Select the "Accepted" on the Supplier Acceptance drop-down. This will display the signature area. Digitally sign the declaration (if required by the Requester) and click on Submit Form to have the form returned to the Requester. Supplier Digital Signature Tom Culhane * Required Field Digitally signed by Tom Culhane DN: cn=Tom Culhane, o=Ecliptek Corporation, ou=Ecliptek Corporation, [email protected], c=US Date: 2013.10.04 14:47:45 -07'00' CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe Homogeneous Material Composition Declaration for Electronic Products SubItem Instructions: The presence of any JIG Level A or B substances must be declared. [1] indicate the subpart in which the substance is located, [2] provide a description of the homogeneous material [3], enter the weight of the homogeneous material. Substance Instructions: [A] select the Level (JIG A, JIG B, Requester or Supplier) [B] select the substance category (JIG or Requester) or enter a value (Supplier). [C] select the substance (JIG) or enter the substance and CAS (Other). [D] select a RoHS exemption, if applicable [E] enter the weight of the substance or the PPM concentration [F] Optionally enter the positive (+) and negative (-) tolerance in percent (Note: percent tolerance values are expected to cover a 3 sigma range of distribution unless otherwise noted). Line Functions: +I Inserts a New Item /SubItem +M Inserts a new Material Item/SubItem Name Homogeneous Material Weight Lead Frame C194 11.591 mg Plating 0.11 Unit of Measure mg +C Inserts a new Substance Category +S Inserts a new Substance - Deletes the element line Unit of Tolerance PPM Measure + Level Substance Category Substance CAS Supplier Copper Copper 7440-50-8 11.325 mg Supplier Iron Iron 7439-89-6 0.252 mg Supplier Zinc Zinc 7440-66-6 0.014 mg B Nickel (external applic Nickel 7440-02-0 0.1 mg Supplier Palladium Palladium 7440-05-3 0.009 mg Supplier Gold Gold 7440-57-5 0.001 mg Exempt Weight Die 1 CMOS Die 0.67 mg Supplier Silicon Silicon 7440-21-3 0.67 mg Die 2 MEMS Die 0.14 mg Supplier Silicon Silicon 7440-21-3 0.14 mg Die Attach 1 Non-Conductive 0.33 mg Supplier Treated Silica/Metal O Treated Silica/Metal Ox Proprietary 0.145 mg Supplier Glycol Ethers Glycol Ethers Proprietary 0.081 mg Supplier Additives Additives Proprietary 0.017 mg Supplier Epoxy Resin Epoxy Resin 24969-06-0 0.087 mg Supplier Silver Silver 7440-22-4 0.06 mg Supplier Acrylate Resin Acrylate Resin Proprietary 0.028 mg Supplier Additive Additive Proprietary 0.002 mg Die Attach 2 Conductive Epox0.09 mg Wire Gold 0.16 mg Supplier Gold Gold 7440-57-5 0.16 mg Encapsulation Epoxy Resin 20.87 mg Supplier Silica Fused Silica Fused 60676-86-0 19.315 mg Supplier Epoxy Resin Epoxy Resin 24969-06-0 0.73 mg Supplier Phenol Resin Phenol Resin Proprietary 0.762 mg Supplier Carbon Black Carbon Black 1333-86-4 0.063 mg * Required Field CAS Registry Number(R) is a Registered Trademark of the American Chemical Society Form enabled by Adobe