BAQ33 / 34 / 35 Vishay Semiconductors Small Signal Switching Diodes, Low Leakage Current Features • • • • Silicon Planar Diodes Very low reverse current Lead (Pb)-free component Component in accordance to RoHS 2002/ 95/EC and WEEE 2002/96/EC e2 Applications 94 9371 Protection circuits, time delay circuits, peak follower circuits, logarithmic amplifiers Mechanical Data Case: MiniMELF Glass case (SOD-80) Weight: approx. 31 mg Cathode Band Color: Black Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS18 / 10 k per 13" reel (8 mm tape), 10 k/box Parts Table Part Type differentiation Ordering code Remarks BAQ33 VRRM = 40 V BAQ33-GS18 or BAQ33-GS08 Tape and Reel BAQ34 VRRM = 70 V BAQ34-GS18 or BAQ34-GS08 Tape and Reel BAQ35 VRRM = 140 V BAQ35-GS18 or BAQ35-GS08 Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Reverse voltage Part Symbol Value Unit BAQ33 VR 30 V BAQ34 VR 60 V BAQ35 Peak forward surge current tp = 1 µs VR 125 V IFSM 2 A IF 200 mA Forward current Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Document Number 85537 Rev. 1.7, 09-Dec-05 Test condition on PC board 50 mm x 50 mm x 1.6 mm Symbol Value Unit RthJA 500 K/W Tj 175 °C Tstg - 65 to + 175 °C www.vishay.com 1 BAQ33 / 34 / 35 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Part Symbol Forward voltage IF = 100 mA VF Reverse current E ≤ 300 lx, rated VR IR E ≤ 300 lx, rated VR, Tj = 125 °C Breakdown voltage Typ. 1 Max Unit 1 V 3 nA 0.5 μA E ≤ 300 lx, VR = 15 V BAQ33 IR 0.5 1 nA E ≤ 300l x, VR = 30 V BAQ34 IR 0.5 1 nA E ≤ 300 lx, VR = 60 V BAQ35 IR 0.5 1 nA IR = 5 µA, tp/T = 0.01, tp= 0.3 ms BAQ33 V(BR) IR = 5 µA, tp/T = 0.01, tp = 0.3 ms Diode capacitance Min VR = 0, f = 1 MHz IR 40 V V BAQ34 V(BR) 70 BAQ35 V(BR) 140 CD V 3 pF Typical Characteristics (Tamb = 25 °C unless otherwise specified) 10000 I R - Reverse Current (nA) V R = VRRM 1000 Scattering Limit 100 10 1 0 40 80 120 160 200 Tj - Junction Temperature (°C) 94 9079 Figure 1. Reverse Current vs. Junction Temperature I F - Forward Current (mA) 1000 Tj = 25 °C 100 Scattering Limit 10 1 0.1 0 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) 94 9078 Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85537 Rev. 1.7, 09-Dec-05 BAQ33 / 34 / 35 Vishay Semiconductors Package Dimensions in mm (Inches) 1.6 (0.062) 1.4 (0.055) Cathode indification Mounting Pad Layout 2.50 (0.098) max 5 (0.197) ref Document Number 85537 Rev. 1.7, 09-Dec-05 0.47 max. (0.02) ISO Method E 1.25 (0.049) min 2 (0.079) min 3.7 (0.144) 3.3 (0.129) 96 12070 www.vishay.com 3 BAQ33 / 34 / 35 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85537 Rev. 1.7, 09-Dec-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1