Process Instrumentation - Two-Phase Flow Gas Void Fraction Eliminator (GVFE) Data Sheet Questionnaire - Oil and Gas Date: Company Name: Company Contact Name (First & Last Name): Company Address: Company Phone Number: Company E-mail Address: Description of Application: PROCESS DATA at the inlet of planned separator installation area. The GVFE is an instrument that you can integrate into your existing pipeline set-up to remove unwanted air or gas volume to ensure that you are only measuring and paying for the liquid. Service: Name and Type of Fluid: Temperature: Min. Normal Max. Units Pressure: Min. Normal Max. Units Flowrate (Liquid): Min. Normal Max. Units Flowrate (Gas): Min. Normal Max. Units. The above flowrate is for: Intermittent Flowrate ☐ or Continuous Flowrate Intermittent Gas Void Fraction ☐ or Continuous Gas Void Fraction ☐ Is there any difference between start-up flowrate vs. normal flowrate? If yes, please provide data: Molecular Weight of Gas: Units: Molecular Weight of Product: Units: Viscosity: Units: Density: Units: % Solids by Weight: Units: % Gas by Volume: Units: Fluid Conductivity (µS/cm): Units: OTHER DATA 1) What is your planned or existing pipe size (inches) & rating? 2) For a more comprehensive proposal, please provide schematic drawings of up & downstream of the system or the system sketch. Attached ☐ 3) The height from the center of the pipe inlet to the ground? 4) Material of Construction + lined/liner material: 5) Process connection size/type/rating: 6) Pipe Class/Schedule: Notes / Special Instructions (2nd flow range, density output range, pumped flow/gravity flow, etc.) Siemens Industry, Inc. 3333 Old Milton Parkway Alpharetta, GA 30005 1-800-241-4453 [email protected]