Aluminium Electrolytic Capacitors/GYU Discontinued Screw Terminal Type Series:GYU Japan U.S.A. n Features Endurance : +85°C 2000 h n Recommended Applications Suitable for the circuits of switching power supply,computer,inverter n Specifications Category temp. range -40 to + 85°C Rated W.V. Range 10 to 100 V .DC 5600 to 1000000 µ F Nominal Cap. Range Capacitance Tolerance -25 to + 85°C 160 to 250 V .DC 1200 to 27000 µ F -10 to +30% (120Hz/+20°C) 3ﾖCV (µA) max. after 5 minutes application of rated working voltage +20°C C:Capacitance(µF) V: W.V. (V.DC) Please see the attached standard products list DC Leakage Current Dissipation Factor After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +85°C, the capacitor shall meet the following limits. Capacitance change ±20 % of initial measured value D.F. <150 % of initial specified value DC leakage current < initial specified value After storage for 1000hours at +85±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in ìEnduranceî.(With voltage treatment) Endurance Shelf Life n Frequency Correction Factor for Ripple Current Freq.(Hz) φD(mm) W.V.(V) 36 51, 64 77, 90 36 51, 64 77, 90 36 51, 64 77, 90 36 51, 64 77, 90 36 51, 64 77, 90 10 to 50 63, 80 100 160, 200 250 50 0.95 0.97 0.98 0.92 0.94 0.96 0.90 0.93 0.95 0.80 0.86 0.90 0.71 0.83 0.85 60 0.96 0.98 0.99 0.95 0.96 0.97 0.94 0.97 0.98 0.86 0.91 0.95 0.79 0.88 0.90 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 300 1.02 1.01 1.01 1.06 1.05 1.03 1.06 1.04 1.02 1.07 1.05 1.05 1.09 1.07 1.05 360 1.03 1.02 1.02 1.08 1.07 1.05 1.09 1.06 1.03 1.08 1.06 1.06 1.10 1.08 1.06 1k 1.04 1.03 1.03 1.11 1.10 1.08 1.13 1.10 1.07 1.12 1.08 1.08 1.15 1.13 1.11 10k to 1.04 1.03 1.03 1.12 1.11 1.09 1.15 1.13 1.08 1.17 1.10 1.10 1.21 1.20 1.20 n Dimensions in mm (not to scale) P.V.C. sleeve M5x12 Hexagonal-bolt Vent φD±1 F±1.0 φD 36 51 64 77 90 L+4 max 9 max F 13.0 22.0 28.6 31.8 31.8 n Mounting clamp Type 1; φ36 Type 2 Type 3 14 120° H 8.4 E 6 2 φD 16 C 35° 59 max 48±1 30° 2 10 x 5 44±1 a 6m B A 45° (mm) φD 51 64 77 A B C 80.0 68.0 57.5 93.0 81.0 70.0 104.5 93.5 90.0 E H max 4.4 13 5.0 13 5.0 13 φD 51 64 77 90 12 0° 1 φD 2-3.5×7 W1 W2 φD1 φD2 65.0 74.0 76.0 86.0 89.0 100.0 101.6 113.0 (mm) W1 9.0 8.0 8.0 8.0 W2 14.0 13.0 14.0 14.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE177 – Aluminium Electrolytic Capacitors/GYU n Standard Products W.V. Case size Cap. 10 16 25 35 Terminal Pitch Part No. Length (µF) (mm) (mm) 68000 36 83 5.9 0.45 13.0 ECEG1AU683P( ) N F 82000 36 103 7.1 0.45 13.0 ECEG1AU823N( ) N F 100000 36 125 8.5 0.45 13.0 ECEG1AU104M( ) N F 150000 51 83 10.0 0.65 22.0 ECEG1AU154L( ) N C (-10 to +30%) (V) Specification Ripple D.F. current (120Hz) (120Hz) (+85˚C) (+20°C) (A) Dia. ( ):Mounting Clamp No (mm) 2point 3 point clamp clamp F 220000 51 103 13.1 0.65 22.0 ECEG1AU224K( ) N C F 270000 51 125 15.6 0.65 22.0 ECEG1AU274J( ) N C F 330000 51 145 17.5 0.65 22.0 ECEG1AU334H( ) N C F 64 103 17.5 0.90 28.6 ECEG1AU334G( ) N C F 390000 64 125 20.6 0.90 28.6 ECEG1AU394F( ) N C F 560000 64 145 26.2 0.90 28.6 ECEG1AU564E( ) N C F 680000 77 125 26.8 1.60 31.8 ECEG1AU684D( ) N C F 820000 77 145 29.4 1.60 31.8 ECEG1AU824C( ) N C F 1000000 90 150 30.6 2.00 31.8 ECEG1AU105A( ) N 39000 36 83 5.5 0.40 13.0 ECEG1CU393P( ) N F 56000 36 103 7.3 0.40 13.0 ECEG1CU563N( ) N F F 68000 36 125 8.8 0.40 13.0 ECEG1CU683M( ) N F 100000 51 83 9.6 0.60 22.0 ECEG1CU104L( ) N C F 120000 51 103 11.3 0.60 22.0 ECEG1CU124K( ) N C F 150000 51 125 13.8 0.60 22.0 ECEG1CU154J( ) N C F 180000 51 145 14.1 0.60 22.0 ECEG1CU184H( ) N C F 220000 64 103 15.6 0.75 28.6 ECEG1CU224G( ) N C F 270000 64 125 18.7 0.75 28.6 ECEG1CU274F( ) N C F 330000 64 145 21.9 0.75 28.6 ECEG1CU334E( ) N C F 390000 77 125 23.1 1.10 31.8 ECEG1CU394D( ) N C F 470000 77 145 26.9 1.10 31.8 ECEG1CU474C( ) N C F 680000 90 150 30.6 1.50 31.8 ECEG1CU684A( ) N 27000 36 83 5.8 0.35 13.0 ECEG1EU273P( ) N F 39000 36 103 7.5 0.35 13.0 ECEG1EU393N( ) N F 47000 36 125 9.0 0.35 13.0 ECEG1EU473M( ) N F 82000 51 83 10.0 0.55 22.0 ECEG1EU823L( ) N C F F 100000 51 103 11.9 0.55 22.0 ECEG1EU104K( ) N C F 120000 51 125 14.4 0.55 22.0 ECEG1EU124J( ) N C F 150000 51 145 16.9 0.55 22.0 ECEG1EU154H( ) N C F 180000 64 103 17.5 0.65 28.6 ECEG1EU184G( ) N C F 220000 64 125 18.8 0.65 28.6 ECEG1EU224F( ) N C F 270000 64 145 22.5 0.65 28.6 ECEG1EU274E( ) N C F 330000 77 125 23.1 0.75 31.8 ECEG1EU334D( ) N C F 390000 77 145 26.9 0.75 31.8 ECEG1EU394C( ) N C F 470000 90 150 29.4 1.0 31.8 ECEG1EU474A( ) N 22000 36 83 5.2 0.30 13.0 ECEG1VU223P( ) N F 27000 36 103 6.2 0.30 13.0 ECEG1VU273N( ) N F 33000 36 125 7.5 0.30 13.0 ECEG1VU333M( ) N F F Endurance : 85°C 2000h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE178 – Aluminium Electrolytic Capacitors/GYU n Standard Products W.V. Case size Cap. Dia. Length (mm) (mm) (-10 to +30%) (V) 35 50 63 80 (µF) Specification Ripple D.F. current (120Hz) (120Hz) (+85˚C) (+20°C) (A) Terminal Pitch Part No. ( ):Mounting Clamp No (mm) 2point 3 point clamp clamp 56000 51 83 8.7 0.35 22.0 ECEG1VU563L( ) N C F 68000 51 103 10.5 0.35 22.0 ECEG1VU683K( ) N C F 82000 51 125 12.3 0.35 22.0 ECEG1VU823J( ) N C F 100000 51 145 15.0 0.35 22.0 ECEG1VU104H( ) N C F 120000 64 103 15.2 0.50 28.6 ECEG1VU124G( ) N C F 150000 64 125 16.3 0.50 28.6 ECEG1VU154F( ) N C F 180000 64 145 18.1 0.50 28.6 ECEG1VU184E( ) N C F 220000 77 125 18.7 0.75 31.8 ECEG1VU224D( ) N C F C F 270000 77 145 22.0 0.75 31.8 ECEG1VU274C( ) N 330000 90 150 25.0 0.90 31.8 ECEG1VU334A( ) N F 15000 36 83 3.8 0.30 13.0 ECEG1HU153P( ) N F 18000 36 103 4.5 0.30 13.0 ECEG1HU183N( ) N F 22000 36 125 5.5 0.30 13.0 ECEG1HU223M( ) N F 33000 51 83 6.7 0.35 22.0 ECEG1HU333L( ) N C F 47000 51 103 8.7 0.35 22.0 ECEG1HU473K( ) N C F 56000 51 125 10.2 0.35 22.0 ECEG1HU563J( ) N C F 68000 51 145 12.2 0.35 22.0 ECEG1HU683H( ) N C F 82000 64 103 13.1 0.50 28.6 ECEG1HU823G( ) N C F 100000 64 125 16.2 0.50 28.6 ECEG1HU104F( ) N C F 120000 64 145 17.7 0.50 28.6 ECEG1HU124E( ) N C F 150000 77 125 18.1 0.75 31.8 ECEG1HU154D( ) N C F 180000 77 145 21.2 0.75 31.8 ECEG1HU184C( ) N C F 220000 90 150 26.2 0.90 31.8 ECEG1HU224A( ) N F 10000 36 83 3.7 0.25 13.0 ECEG1JU103P( ) N F 15000 36 103 5.0 0.25 13.0 ECEG1JU153N( ) N F 18000 36 125 6.0 0.25 13.0 ECEG1JU183M( ) N F 27000 51 83 7.6 0.30 22.0 ECEG1JU273L( ) N C F 33000 51 103 9.7 0.30 22.0 ECEG1JU333K( ) N C F 39000 51 125 10.7 0.30 22.0 ECEG1JU393J( ) N C F 47000 51 145 12.5 0.30 22.0 ECEG1JU473H( ) N C F 56000 64 103 13.7 0.40 28.6 ECEG1JU563G( ) N C F 68000 64 125 16.2 0.40 28.6 ECEG1JU683F( ) N C F 82000 64 145 20.0 0.40 28.6 ECEG1JU823E( ) N C F 100000 77 125 20.6 0.50 31.8 ECEG1JU104D( ) N C F 120000 77 145 23.7 0.50 31.8 ECEG1JU124C( ) N C F 180000 90 150 31.2 0.60 31.8 ECEG1JU184A( ) N F 8200 36 83 3.5 0.25 13.0 ECEG1KU822P( ) N F 10000 36 103 4.3 0.25 13.0 ECEG1KU103N( ) N F 12000 36 125 5.0 0.25 13.0 ECEG1KU123M( ) N F 18000 51 83 6.2 0.25 22.0 ECEG1KU183L( ) N C F 22000 51 103 7.5 0.25 22.0 ECEG1KU223K( ) N C F 27000 51 125 9.0 0.25 22.0 ECEG1KU273J( ) N C F Endurance : 85°C 2000h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE179 – Aluminium Electrolytic Capacitors/GYU n Standard Products W.V. Cap. 100 160 200 Terminal Pitch Part No. (µF) (mm) (mm) 39000 51 145 11.5 0.25 22.0 ECEG1KU393H( ) 64 103 11.5 0.30 28.6 ECEG1KU393G( ) N C F 64 125 14.3 0.30 28.6 ECEG1KU473F( ) N C F 47000 80 Specification Ripple D.F. current (120Hz) (120Hz) (+85˚C) (+20°C) (A) Length (-10 to +30%) (V) Case size Dia. ( ):Mounting Clamp No (mm) N 2point 3 point clamp clamp C F 56000 64 145 15.6 0.30 28.6 ECEG1KU563E( ) N C F 68000 77 125 16.8 0.40 31.8 ECEG1KU683D( ) N C F 100000 77 145 21.2 0.40 31.8 ECEG1KU104C( ) N C 120000 90 150 26.2 0.50 31.8 ECEG1KU124A( ) N 5600 36 83 2.8 0.20 13.0 ECEG2AU562P( ) N F 8200 36 103 3.8 0.20 13.0 ECEG2AU822N( ) N F 10000 36 125 4.5 0.20 13.0 ECEG2AU103M( ) N F 15000 51 83 5.7 0.20 22.0 ECEG2AU153L( ) N C F 18000 51 103 6.7 0.20 22.0 ECEG2AU183K( ) N C F 22000 51 125 8.2 0.20 22.0 ECEG2AU223J( ) N C F 27000 51 145 9.7 0.20 22.0 ECEG2AU273H( ) N C F 33000 64 103 10.5 0.25 28.6 ECEG2AU333G( ) N C F 39000 64 125 12.5 0.25 28.6 ECEG2AU393F( ) N C F F F 47000 64 145 14.3 0.25 28.6 ECEG2AU473E( ) N C F 56000 77 125 15.6 0.35 31.8 ECEG2AU563D( ) N C F C 68000 77 145 18.1 0.35 31.8 ECEG2AU683C( ) N 100000 90 150 23.7 0.45 31.8 ECEG2AU104A( ) N 2200 36 83 0.15 13.0 ECEG2CU222P( ) N F 2.31 F F 2700 36 103 2.75 0.15 13.0 ECEG2CU272N( ) N F 3300 36 125 3.38 0.15 13.0 ECEG2CU332M( ) N F 3900 51 83 3.75 0.15 22.0 ECEG2CU392L( ) N C F 5600 51 103 5.00 0.15 22.0 ECEG2CU562K( ) N C F 6800 51 125 5.75 0.15 22.0 ECEG2CU682J( ) N C F 8200 51 145 6.75 0.15 22.0 ECEG2CU822H( ) N C F 64 103 6.75 0.15 28.6 ECEG2CU822G( ) N C F 10000 64 125 8.13 0.15 28.6 ECEG2CU103F( ) N C F 12000 64 145 9.50 0.15 28.6 ECEG2CU123E( ) N C F 15000 77 125 11.2 0.15 31.8 ECEG2CU153D( ) N C F 18000 77 145 12.5 0.15 31.8 ECEG2CU183C( ) N C F 27000 90 150 17.5 0.15 31.8 ECEG2CU273A( ) N 1800 36 83 2.13 0.15 13.0 ECEG2DU182P( ) N F 2200 36 103 2.50 0.15 13.0 ECEG2DU222N( ) N F 2700 36 125 3.00 0.15 13.0 ECEG2DU272M( ) N F F 3300 51 83 3.50 0.15 22.0 ECEG2DU332L( ) N C F 4700 51 103 4.50 0.15 22.0 ECEG2DU472K( ) N C F 5600 51 125 5.25 0.15 22.0 ECEG2DU562J( ) N C F 6800 51 145 6.25 0.15 22.0 ECEG2DU682H( ) N C F 64 103 6.25 0.15 28.6 ECEG2DU682G( ) N C F 64 125 7.38 0.15 28.6 ECEG2DU822F( ) N C F 8200 Endurance : 85°C 2000h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE180 – Aluminium Electrolytic Capacitors/GYU n Standard Products W.V. Cap. 200 250 Specification Ripple D.F. current (120Hz) (120Hz) (+85˚C) (+20°C) (A) Length (µF) (mm) (mm) 10000 64 145 15000 77 125 18000 77 145 22000 90 150 1200 36 83 1.75 1500 36 103 1800 36 125 (-10 to +30%) (V) Case size Dia. 8.63 Terminal Pitch Part No. ( ):Mounting Clamp No (mm) 2point 3 point clamp clamp 0.15 28.6 ECEG2DU103E( ) N C F 11.2 0.15 31.8 ECEG2DU153D( ) N C F 13.1 0.15 31.8 ECEG2DU183C( ) N C F 15.6 0.15 31.8 ECEG2DU223A( ) N 0.15 13.0 ECEG2EU122P( ) N 2.13 0.15 13.0 ECEG2EU152N( ) N F 2.50 0.15 13.0 ECEG2EU182M( ) N F F F 2200 51 83 2.88 0.15 22.0 ECEG2EU222L( ) N C F 3300 51 103 3.75 0.15 22.0 ECEG2EU332K( ) N C F 3900 51 125 4.38 0.15 22.0 ECEG2EU392J( ) N C F 4700 51 145 5.25 0.15 22.0 ECEG2EU472H( ) N C F 64 103 5.25 0.15 28.6 ECEG2EU472G( ) N C F 5600 64 125 6.00 0.15 28.6 ECEG2EU562F( ) N C F 6800 64 145 7.13 0.15 28.6 ECEG2EU682E( ) N C F 10000 77 125 0.15 31.8 ECEG2EU103D( ) N C F 12000 77 145 10.6 0.15 31.8 ECEG2EU123C( ) N C F 15000 90 150 13.1 0.15 31.8 ECEG2EU153A( ) N 9.13 F Endurance : 85°C 2000h Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE181 –