Package Description Package Code Lead Finish J‐STD‐609 Category Assembly Location Atmel Corporation ‐ Package Material Declaration Datasheet 48‐Leads, 0.4 mm Pitch, 5.5 x 5.5 x 0.5 mm, Extremely Thin Fine‐Pitch Land Grid Array Package (XFLGA) AB GPC DFA Nickel‐Gold (Ni‐Au) RoHS Compliant Yes Yes e4 Green Compliant ASE Kaohsiung REACH Compliant Yes Package Material Declaration Material Integrated Circuit Sub‐Total Die Attach Sub‐Total Bond Wire Sub‐Total Encapsulation Sub‐Total Laminate Sub‐Total Soldermask Sub‐Total Terminal Plating Substance Silicon (Si) CAS # 7440‐21‐3 Modified Epoxy Resin Epoxy Resin Dapsone Treated Fumed Silica Substituted Silane Elastomeric Polymer Epoxy Resin Proprietary Proprietary 80‐08‐0 67762‐90‐7 Proprietary Proprietary Proprietary Gold (Au) 7440‐57‐5 Silica Fused Epoxy Resin Phenol Resin Carbon Black 60676‐86‐0 Proprietary Proprietary 1333‐86‐4 Copper (Cu) Filament Fiber Glass BT Epoxy Resin Inorganic Filler 7440‐50‐8 65997‐17‐3 Proprietary 21645‐51‐2 Acrylate Resin Barium Sulfate Epoxy Resin Organic Compounds Talc Silica Phthalocyanine Blue Proprietary 7727‐43‐7 Proprietary Proprietary 14807‐96‐6 7631‐86‐9 147‐14‐8 Nickel (Ni) Gold (Au) 7440‐02‐0 7440‐57‐5 Sub‐Total Total Weight (mg) 3.678 3.678 0.181 0.039 0.016 0.005 0.005 0.005 0.005 0.256 0.377 0.377 10.294 0.653 0.481 0.034 11.463 2.790 1.506 1.506 0.890 6.691 0.285 0.223 0.111 0.049 0.019 0.005 0.002 0.695 0.256 0.050 0.306 23.467 Homogeneous Material Percentage ppm 100.0 1000000 100.0 1000000 70.5 705000 15.2 152000 6.3 63000 2.0 20000 2.0 20000 2.0 20000 2.0 20000 100.0 1000000 100.0 1000000 100.0 1000000 89.8 898000 5.7 57000 4.2 42000 0.3 3000 100.0 1000000 41.7 417000 22.5 225000 22.5 225000 13.3 133000 100.0 1000000 41.0 410000 32.1 321000 16.0 160000 7.1 71000 2.8 28000 0.7 7000 0.3 3000 100.0 1000000 83.7 837000 16.3 163000 100.0 1000000 Package Percentage ppm 15.67 156732 15.67 156732 0.77 7702 0.17 1660 0.07 688 0.02 218 0.02 218 0.02 218 0.02 218 1.09 10924 1.61 16054 1.61 16054 43.86 438646 2.78 27843 2.05 20516 0.15 1465 48.85 488470 11.89 118903 6.42 64156 6.42 64156 3.79 37924 28.51 285140 1.21 12146 0.95 9510 0.47 4740 0.21 2103 0.08 829 0.02 207 0.01 89 2.96 29625 1.09 10927 0.21 2128 1.31 13056 100.00 1000000 Package Material Declaration Certificate Atmel Corporation certifies that the material content information provided above is representative and accurate as of the date of this declaration. Atmel Corporation products designated as "RoHS Compliant" or "Green" (defined below) do not exceed the threshold limits of the European Union Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, and the China Administration on Control of Pollution by Electronic Information Products (China RoHS). Atmel Corporation has taken commercially reasonable steps to provide representative and accurate information, but may not have conducted chemical analysis or destructive testing on incoming materials. Atmel Corporation and its suppliers consider certain information to be proprietary and thus CAS numbers and other limited information may not be available for release. Atmel Corporation accepts no duty to notify or update users of any changes made to this declaration. Atmel Corporation's standard Terms and Conditions apply to the representations provided herein unless otherwise provided by a written contract or other agreement signed by both parties. Name / Title: William B. Dupey III / Quality Engineer & Chemist Date: August 26, 2015 RoHS Compliant: Atmel Corporation defines "RoHS Compliant" to mean maximum concentration value of 0.1% (1000 ppm) for Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Polybrominated Biphenyl (PBB), Polybrominated Diphenyl Ether (PBDE) , Bis(2‐ethylhexyl) Phthalate (DEHP), Butyl Benzyl Phthalate (BBP), Dibutyl Phthalate (DBP), Diisobutyl Phthalate (DIBP) and maximum concentration value of 0.01% (100 ppm) for Cadmium (Cd) in any homogeneous material. Green: Atmel Corporation defines "Green" to mean, in addition to substances listed in "RoHS Compliant", maximum concentration value of 0.09% (900 ppm) for Antimony (Sb), 0.09% (900 ppm) for Bromine (Br) and Chlorine (Cl) and less than 0.15% (1500 ppm) total Bromine (Br) and Chlorine (Cl) in any homogeneous material.