Macronix Proprietary PRODUCT CHANGE NOTIFICATION PCN-11-030 Title: Migrating from MX25L6408D to MX25L6408E Notification Number: PCN-11-030 Notification Date: January 1, 2012 Change Type: Product Migration 1. Change Identification Product Identification MX25L6408D Reason of Change Process Change from 0.13μm to 0.11μm 2. Implementation Schedule 2-a. Affected Product Schedule Last Order Date September 30, 2012 Last Shipment Date December 31, 2012 2-b. Replacement Product Schedule Sample Availability January, 2011 3. List of Product Affected Affected Part Number MX25L6408DMI-12G Recommend Part Number MX25L6408EMI-12G Should you have any questions or specific requirement for the extension of product supports, please contact your local Macronix sales representative within 30 days. For other information or specification of succeeding products, please contact your local Macronix sales representative or visit Macronix’s Web site at http://www.macronix.com. 1 Macronix Proprietary PRODUCT CHANGE NOTIFICATION PCN-11-030 4. Supplementary Parameter Comparison Part Number MX25L6408D MX25L6408E Voltage 2.7V -- 3.6V 2.7V -- 3.6V Density 64Mb 64Mb Package 300mil 16SOP 300mil 16SOP Sector 4KB 4KB Block 64KB 64KB Single Read Single Read Dual Read (2in/2out) Dual Output Read (1in/2out) 256 bytes 256 bytes Yes Yes 1 I/O: 86 MHz 1 I/O: 86 MHz 2 I/O: 50 MHz Dual output: 80MHz 33 MHz 33 MHz Yes Yes Non-Volatile Non-Volatile C2 Hex C2 Hex 16 Hex 16 Hex Device ID (command: 9F H) 20/17 Hex 20/17 Hex Endurance 100K (typ.) 100K (typ.) 20 years (min) 20 years (min) Fast Read mode Page Program Size Hold# pin Clock rate (Fast read) Clock rate (Normal read) Page Program Block Protection Bits: BPx Manufacture ID Device ID (command: AB H, 90 H) Data Retention 2 Macronix Proprietary PRODUCT CHANGE NOTIFICATION PCN-11-030 Performance Part Number MX25L6408D MX25L6408E 20uA 50uA 25mA @ 86MHz 25mA @ 86MHz Typ. 7ms/Max. 100ms Typ. 5ms/Max. 40ms Typ. 1.4ms/Max. 5ms Typ. 1.4ms/Max. 5ms Sector Erase Time Typ. 60ms/Max. 300ms Typ. 60ms/Max. 300ms Block Erase Time Typ. 0.7 s/Max. 2 s Typ. 0.7 s/ Max. 2 s Chip Erase Time Typ. 42 s/ Max. 80 s Typ. 50 s/ Max. 80 s Icc Standby (max.) Icc Read (max.) Write Status Register Cycle Time (tW) -Max Page Program Time 3 Macronix Proprietary PRODUCT CHANGE NOTIFICATION PCN-11-030 The information contented herein is provided based on the current product status. Macronix reserves the right to change product and specifications, or to make correction or modification to the document without notice. Unless otherwise agreed by Macronix in writing, Macronix shall assume no liability or responsibility for any damage or loss arising out of or in connection with this notice and/or the product change contemplated herein. Except for customized products which have been expressly identified in the applicable agreement, Macronix's products are designed, developed, and/or manufactured for ordinary business, industrial, personal, and/or household applications only, and not for use in any applications which may, directly or indirectly, cause death, personal injury, or severe property damages. In the event Macronix products are used in contradicted to their target usage above, the buyer shall take any and all actions to ensure said Macronix's product qualified for its actual use in accordance with the applicable laws and regulations; and Macronix as well as it’s suppliers and/or distributors shall be released from any and all liability arisen therefrom. Copyright© Macronix International Co., Ltd. 2010~2011. All rights reserved. Macronix, MXIC, MXIC Logo, MX Logo, Integrated Solutions Provider, NBit, NBiit, Macronix NBit, eLiteFlash, XtraROM, Phines, BE-SONOS, KSMC, Kingtech, MXSMIO, Macronix vEE are trademarks or registered trademarks of Macronix International Co., Ltd. The names and brands of other companies are for identification purposes only and may be claimed as the property of the respective companies. 4