VISHAY MBR20100CTG-1PBF

MBRB20...CTGPbF/MBR20...CTG-1PbF
Vishay High Power Products
Schottky Rectifier, 2 x 10 A
FEATURES
MBRB20...CTGPbF
MBR20...CTG-1PbF
• 150 °C TJ operation
• Center tap D2PAK and TO-262 packages
• Low forward voltage drop
• High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Base
common
cathode
2
Base
common
cathode
2
• High frequency operation
• Guard ring enhanced ruggedness and long term reliability
• Lead (Pb)-free (“PbF” suffix)
2
1 Common
3
Anode cathode Anode
2
1 Common
3
Anode cathode Anode
D2PAK
TO-262
• Designed and qualified for AEC Q101 level
DESCRIPTION
This center tap Schottky rectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 150 °C junction
temperature. Typical applications are in switching power
supplies, converters, freewheeling diodes, and reverse
battery protection.
PRODUCT SUMMARY
IF(AV)
2 x 10 A
VR
80 to 100 V
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IFRM
CHARACTERISTICS
TC = 133 °C (per leg)
VRRM
VALUES
UNITS
20
A
80 to 100
V
IFSM
tp = 5 µs sine
850
A
VF
10 Apk, TJ = 125 °C
0.70
V
TJ
Range
- 65 to 150
°C
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
SYMBOL
VR
MBRB2080CTGPbF
MBR2080CTG-1PbF
80
MBRB2090CTGPbF MBRB20100CTGPbF
MBR2090CTG-1PbF MBR20100CTG-1PbF
90
100
UNITS
V
VRWM
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94517
Revision: 08-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
1
MBRB20...CTGPbF/MBR20...CTG-1PbF
Vishay High Power Products
Schottky Rectifier,
2 x 10 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
SYMBOL
per leg
per device
Peak repetitive forward current per leg
Non-repetitive peak surge current
TEST CONDITIONS
VALUES
10
IF(AV)
TC = 133 °C, rated VR
IFRM
Rated VR, square wave, 20 kHz
TC = 133 °C
20
5 µs sine or 3 µs
rect. pulse
850
IFSM
UNITS
20
Following any rated load condition
and with rated VRRM applied
Surge applied at rated load conditions half wave,
single phase, 60 Hz
150
A
Peak repetitive reverse surge current
IRRM
2.0 µs, 1.0 kHz
0.5
Non-repetitive avalanche energy per leg
EAS
TJ = 25 °C, IAS = 2 A, L = 12 mH
24
mJ
VALUES
UNITS
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
10 A
Maximum forward voltage drop
VFM (1)
20 A
10 A
20 A
Maximum instantaneous
reverse current
IRM (1)
Threshold voltage
VF(TO)
Forward slope resistance
Maximum junction capacitance
Typical series inductance
Maximum voltage rate of change
rt
CT
LS
dV/dt
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
VR = Rated VR
TJ = TJ maximum
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
Measured from top of terminal to mounting plane
Rated VR
0.80
0.95
0.70
V
0.85
0.10
6
mA
0.433
V
15.8
mΩ
400
pF
8.0
nH
10 000
V/µs
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 94517
Revision: 08-Oct-08
MBRB20...CTGPbF/MBR20...CTG-1PbF
Schottky Rectifier,
2 x 10 A
Vishay High Power Products
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
Maximum junction temperature range
TJ
- 65 to 150
Maximum storage temperature range
TStg
- 65 to 175
Maximum thermal resistance,
junction to case per leg
RthJC
Maximum thermal resistance
junction to ambient
RthJA
minimum
maximum
°C
2.0
DC operation
°C/W
50
Approximate weight
Mounting torque
UNITS
Non-lubricated threads
2
g
0.07
oz.
6 (5)
kgf · cm
12 (10)
(lbf · in)
MBRB2080CTG
Case style D2PAK
MBRB2090CTG
MBRB20100CTG
Marking device
MBR2080CTG-1
Case style TO-262
MBR2090CTG-1
MBR20100CTG-1
Document Number: 94517
Revision: 08-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
3
MBRB20...CTGPbF/MBR20...CTG-1PbF
Schottky Rectifier,
2 x 10 A
Vishay High Power Products
100
100
TJ = 150°C
125°C
1
100°C
0.1
75°C
50°C
0.01
25°C
0.001
TJ = 150°C
0.0001
0
TJ = 125°C
20
40
60
80
100
Reverse Voltage - VR (V)
TJ = 25°C
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
10
1000
1
0.2
Junction Cap acitance - C T (pF)
Instantaneous Forward Current - IF (A)
Reverse Current - IR (mA)
10
0.4
0.6
0.8
1
1.2
1.4
1.6
TJ = 25°C
100
1.8
10
Forward Voltage Drop - V FM (V)
0
20
40
60
80
100
Reverse Voltage - VR (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage (Per Leg)
Thermal Impedance Z thJC (°C/ W)
10
1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
PDM
t1
0.1
0.01
0.00001
0.0001
0.001
t2
Notes:
Single Pulse
(Thermal Resistance)
1. Duty factor D = t 1/ t 2
2. Peak TJ = PDM x Z thJC+ TC
0.01
0.1
1
10
t 1 , Rec ta ng ular Pulse Duration (Sec onds)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94517
Revision: 08-Oct-08
MBRB20...CTGPbF/MBR20...CTG-1PbF
Schottky Rectifier,
2 x 10 A
Vishay High Power Products
10
140
Average Power Loss - (Watts)
Allowable Case Temperature - (°C)
150
DC
130
Sq uare wave (D = 0.50)
Rated VR applied
120
110
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
8
6
DC
RMSLimit
4
2
see note (1)
0
100
0
2
4
6
8
10
12
14
0
16
2
4
6
8
10
12
14
16
Average Forward Current - I F(AV) (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics
(Per Leg)
Non-Repetitive Surge Current - I FSM (A)
Average Forward Current - I F(AV) (A)
1000
At Any Rated Load Condition
And With Rated VRRM Applied
Following Surge
100
10
100
1000
10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
Document Number: 94517
Revision: 08-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
5
MBRB20...CTGPbF/MBR20...CTG-1PbF
Schottky Rectifier,
2 x 10 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MBR
B
20
100
CT
G
-1
TL
PbF
1
2
3
4
5
6
7
8
9
1
-
Essential part number
2
-
3
-
None = TO-262
Current rating (20 = 20 A)
4
-
Voltage ratings
5
-
CT = Essential part number
6
-
G = Schottky generation
7
-
B = D2PAK
80 = 80 V
90 = 90 V
100 = 100 V
None = D2PAK
-1 = TO-262
8
-
None = Tube (50 pieces)
TL = Tape and reel (left oriented - for D2PAK only)
TR = Tape and reel (right oriented - for D2PAK only)
9
-
None = Standard production
PbF = Lead (Pb)-free (D2PAK tube)
P = Lead (Pb)-free (for D2PAK TR and TL, and TO-262)
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95014
Part marking information
http://www.vishay.com/doc?95008
Packaging information
http://www.vishay.com/doc?95032
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 94517
Revision: 08-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1